История изменений

Вот такая проблема:

$ arm-none-eabi-gdb ./test1.elf 
GNU gdb (Sourcery G++ Lite 2011.03-42) 7.2.50.20100908-cvs
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "--host=i686-pc-linux-gnu --target=arm-none-eabi".
For bug reporting instructions, please see:
<https://support.codesourcery.com/GNUToolchain/>...
Reading symbols from /home/trex/workspace/test1/Debug/test1.elf...done.
(gdb) target remote localhost:3333
Remote debugging using localhost:3333
0x00000000 in ?? ()
(gdb) monitor reset halt
JTAG tap: lpc1788.cpu tap/device found: 0x4ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x4)
Only resetting the Cortex-M3 core, use a reset-init event handler to reset any peripherals
target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x000000f8 msp: 0x10004860
(gdb) load
Start address 0x0, load size 0
Transfer rate: 0 bits in <1 sec.
(gdb) break main
Function "main" not defined.
Make breakpoint pending on future shared library load? (y or [n]) y
Breakpoint 1 (main) pending.
(gdb)

Судя по

Start address 0x0, load size 0

ничего не загружается.

Не поможете решить проблему?

Вот такая проблема:
[code]
$ arm-none-eabi-gdb ./test1.elf
GNU gdb (Sourcery G++ Lite 2011.03-42) 7.2.50.20100908-cvs
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type «show copying»
and «show warranty» for details.
This GDB was configured as "--host=i686-pc-linux-gnu --target=arm-none-eabi".
For bug reporting instructions, please see:
<https://support.codesourcery.com/GNUToolchain/>...
Reading symbols from /home/trex/workspace/test1/Debug/test1.elf...done.
(gdb) target remote localhost:3333
Remote debugging using localhost:3333
0x00000000 in ?? ()
(gdb) monitor reset halt
JTAG tap: lpc1788.cpu tap/device found: 0x4ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x4)
Only resetting the Cortex-M3 core, use a reset-init event handler to reset any peripherals
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x000000f8 msp: 0x10004860
(gdb) load
Start address 0x0, load size 0
Transfer rate: 0 bits in <1 sec.
(gdb) break main
Function «main» not defined.
Make breakpoint pending on future shared library load? (y or [n]) y
Breakpoint 1 (main) pending.
(gdb)
[/code]

Судя по

Start address 0x0, load size 0

ничего не загружается.

Не поможете решить проблему?