История изменений
Исправление Desmond_Hume, (текущая версия) :
[pushistiq@localhost ~]$ df -hT
df: /mnt/pushistiq-3vi-Downloads: Software caused connection abort
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 7.9G 0 7.9G 0% /dev
tmpfs tmpfs 7.9G 527M 7.3G 7% /dev/shm
tmpfs tmpfs 7.9G 1.9M 7.9G 1% /run
tmpfs tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup
/dev/dm-1 ext4 87G 8.3G 75G 11% /
tmpfs tmpfs 7.9G 896K 7.9G 1% /tmp
/dev/dm-2 ext4 131G 61G 63G 50% /home
/dev/sda1 ext4 1.4G 176M 1.1G 14% /boot
/dev/sdc1 ext4 2.7T 581G 2.0T 23% /mnt/Container3TB
/dev/sdd1 ext4 1.8T 1.6T 118G 94% /mnt/Container2TB
tmpfs tmpfs 1.6G 20K 1.6G 1% /run/user/42
tmpfs tmpfs 1.6G 68K 1.6G 1% /run/user/1000
[pushistiq@localhost ~]$ mount -a
mount: only root can use "--all" option
[pushistiq@localhost ~]$ sudo mount -a
[sudo] password for pushistiq:
[pushistiq@localhost ~]$ df -hT
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 7.9G 0 7.9G 0% /dev
tmpfs tmpfs 7.9G 527M 7.3G 7% /dev/shm
tmpfs tmpfs 7.9G 1.9M 7.9G 1% /run
tmpfs tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup
/dev/dm-1 ext4 87G 8.3G 75G 11% /
tmpfs tmpfs 7.9G 896K 7.9G 1% /tmp
/dev/dm-2 ext4 131G 61G 63G 50% /home
/dev/sda1 ext4 1.4G 176M 1.1G 14% /boot
/dev/sdc1 ext4 2.7T 581G 2.0T 23% /mnt/Container3TB
/dev/sdd1 ext4 1.8T 1.6T 118G 94% /mnt/Container2TB
tmpfs tmpfs 1.6G 20K 1.6G 1% /run/user/42
tmpfs tmpfs 1.6G 64K 1.6G 1% /run/user/1000
pushistiq@192.168.1.41:/var/lib/transmission/Downloads/ fuse.sshfs 455G 186G 246G 44% /mnt/pushistiq-3vi-Downloads
[pushistiq@localhost ~]$
Наверное, придётся смириться). На серваке такие вот настройки в /etc/ssh/sshd_config:
# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/local/bin:/usr/bin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
# If you want to change the port on a SELinux system, you have to tell
# SELinux about this change.
# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER
#
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# The default requires explicit activation of protocol 1
#Protocol 2
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
HostKey /etc/ssh/ssh_host_ecdsa_key
HostKey /etc/ssh/ssh_host_ed25519_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# Ciphers and keying
#RekeyLimit default none
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
#PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
RSAAuthentication yes
PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
PasswordAuthentication yes
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
#KerberosUseKuserok yes
# GSSAPI options
GSSAPIAuthentication yes
GSSAPICleanupCredentials no
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no
#GSSAPIEnablek5users no
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
# WARNING: 'UsePAM no' is not supported in Red Hat Enterprise Linux and may cause several
# problems.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
#PrintMotd yes
#PrintLastLog yes
TCPKeepAlive yes
#UseLogin no
UsePrivilegeSeparation sandbox # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
ClientAliveInterval 9600
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# Accept locale-related environment variables
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
AcceptEnv XMODIFIERS
# override default of no subsystems
Subsystem sftp /usr/libexec/openssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs serverИсправление Desmond_Hume, :
[pushistiq@localhost ~]$ df -hT
df: /mnt/pushistiq-3vi-Downloads: Software caused connection abort
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 7.9G 0 7.9G 0% /dev
tmpfs tmpfs 7.9G 527M 7.3G 7% /dev/shm
tmpfs tmpfs 7.9G 1.9M 7.9G 1% /run
tmpfs tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup
/dev/dm-1 ext4 87G 8.3G 75G 11% /
tmpfs tmpfs 7.9G 896K 7.9G 1% /tmp
/dev/dm-2 ext4 131G 61G 63G 50% /home
/dev/sda1 ext4 1.4G 176M 1.1G 14% /boot
/dev/sdc1 ext4 2.7T 581G 2.0T 23% /mnt/Container3TB
/dev/sdd1 ext4 1.8T 1.6T 118G 94% /mnt/Container2TB
tmpfs tmpfs 1.6G 20K 1.6G 1% /run/user/42
tmpfs tmpfs 1.6G 68K 1.6G 1% /run/user/1000
[pushistiq@localhost ~]$ mount -a
mount: only root can use "--all" option
[pushistiq@localhost ~]$ sudo mount -a
[sudo] password for pushistiq:
[pushistiq@localhost ~]$ df -hT
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 7.9G 0 7.9G 0% /dev
tmpfs tmpfs 7.9G 527M 7.3G 7% /dev/shm
tmpfs tmpfs 7.9G 1.9M 7.9G 1% /run
tmpfs tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup
/dev/dm-1 ext4 87G 8.3G 75G 11% /
tmpfs tmpfs 7.9G 896K 7.9G 1% /tmp
/dev/dm-2 ext4 131G 61G 63G 50% /home
/dev/sda1 ext4 1.4G 176M 1.1G 14% /boot
/dev/sdc1 ext4 2.7T 581G 2.0T 23% /mnt/Container3TB
/dev/sdd1 ext4 1.8T 1.6T 118G 94% /mnt/Container2TB
tmpfs tmpfs 1.6G 20K 1.6G 1% /run/user/42
tmpfs tmpfs 1.6G 64K 1.6G 1% /run/user/1000
pushistiq@192.168.1.41:/var/lib/transmission/Downloads/ fuse.sshfs 455G 186G 246G 44% /mnt/pushistiq-3vi-Downloads
[pushistiq@localhost ~]$
Наверное, придётся смириться). На серваке такие вот настройки в /etc/sshd_config:
# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/local/bin:/usr/bin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
# If you want to change the port on a SELinux system, you have to tell
# SELinux about this change.
# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER
#
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# The default requires explicit activation of protocol 1
#Protocol 2
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
HostKey /etc/ssh/ssh_host_ecdsa_key
HostKey /etc/ssh/ssh_host_ed25519_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# Ciphers and keying
#RekeyLimit default none
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
#PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
RSAAuthentication yes
PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
PasswordAuthentication yes
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
#KerberosUseKuserok yes
# GSSAPI options
GSSAPIAuthentication yes
GSSAPICleanupCredentials no
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no
#GSSAPIEnablek5users no
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
# WARNING: 'UsePAM no' is not supported in Red Hat Enterprise Linux and may cause several
# problems.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
#PrintMotd yes
#PrintLastLog yes
TCPKeepAlive yes
#UseLogin no
UsePrivilegeSeparation sandbox # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
ClientAliveInterval 9600
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# Accept locale-related environment variables
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
AcceptEnv XMODIFIERS
# override default of no subsystems
Subsystem sftp /usr/libexec/openssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs serverИсходная версия Desmond_Hume, :
[pushistiq@localhost ~]$ df -hT
df: /mnt/pushistiq-3vi-Downloads: Software caused connection abort
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 7.9G 0 7.9G 0% /dev
tmpfs tmpfs 7.9G 527M 7.3G 7% /dev/shm
tmpfs tmpfs 7.9G 1.9M 7.9G 1% /run
tmpfs tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup
/dev/dm-1 ext4 87G 8.3G 75G 11% /
tmpfs tmpfs 7.9G 896K 7.9G 1% /tmp
/dev/dm-2 ext4 131G 61G 63G 50% /home
/dev/sda1 ext4 1.4G 176M 1.1G 14% /boot
/dev/sdc1 ext4 2.7T 581G 2.0T 23% /mnt/Container3TB
/dev/sdd1 ext4 1.8T 1.6T 118G 94% /mnt/Container2TB
tmpfs tmpfs 1.6G 20K 1.6G 1% /run/user/42
tmpfs tmpfs 1.6G 68K 1.6G 1% /run/user/1000
[pushistiq@localhost ~]$ mount -a
mount: only root can use "--all" option
[pushistiq@localhost ~]$ sudo mount -a
[sudo] password for pushistiq:
[pushistiq@localhost ~]$ mount -a
mount: only root can use "--all" option
[pushistiq@localhost ~]$ df -hT
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 7.9G 0 7.9G 0% /dev
tmpfs tmpfs 7.9G 527M 7.3G 7% /dev/shm
tmpfs tmpfs 7.9G 1.9M 7.9G 1% /run
tmpfs tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup
/dev/dm-1 ext4 87G 8.3G 75G 11% /
tmpfs tmpfs 7.9G 896K 7.9G 1% /tmp
/dev/dm-2 ext4 131G 61G 63G 50% /home
/dev/sda1 ext4 1.4G 176M 1.1G 14% /boot
/dev/sdc1 ext4 2.7T 581G 2.0T 23% /mnt/Container3TB
/dev/sdd1 ext4 1.8T 1.6T 118G 94% /mnt/Container2TB
tmpfs tmpfs 1.6G 20K 1.6G 1% /run/user/42
tmpfs tmpfs 1.6G 64K 1.6G 1% /run/user/1000
pushistiq@192.168.1.41:/var/lib/transmission/Downloads/ fuse.sshfs 455G 186G 246G 44% /mnt/pushistiq-3vi-Downloads
[pushistiq@localhost ~]$
Наверное, придётся смириться). На серваке такие вот настройки в /etc/sshd_config:
# $OpenBSD: sshd_config,v 1.93 2014/01/10 05:59:19 djm Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/local/bin:/usr/bin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
# If you want to change the port on a SELinux system, you have to tell
# SELinux about this change.
# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER
#
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# The default requires explicit activation of protocol 1
#Protocol 2
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
HostKey /etc/ssh/ssh_host_ecdsa_key
HostKey /etc/ssh/ssh_host_ed25519_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# Ciphers and keying
#RekeyLimit default none
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
#PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
RSAAuthentication yes
PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
PasswordAuthentication yes
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
#KerberosUseKuserok yes
# GSSAPI options
GSSAPIAuthentication yes
GSSAPICleanupCredentials no
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no
#GSSAPIEnablek5users no
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
# WARNING: 'UsePAM no' is not supported in Red Hat Enterprise Linux and may cause several
# problems.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
#PrintMotd yes
#PrintLastLog yes
TCPKeepAlive yes
#UseLogin no
UsePrivilegeSeparation sandbox # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
ClientAliveInterval 9600
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# Accept locale-related environment variables
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
AcceptEnv XMODIFIERS
# override default of no subsystems
Subsystem sftp /usr/libexec/openssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs server