История изменений
Исправление c0unt0, (текущая версия) :
Наглухо виснет. Даже REISUB не срабатывает.
journalctl -o short-precise -k -b -1 и journalctl –boot=-1
Тоже смотрел. Вот например:
мар 25 14:39:43.296874 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:39:47.368855 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:13.200843 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:36.880877 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:40.952835 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:49.160834 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:58.304875 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:41:06.996861 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:41:21.136867 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:42:05.740843 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:42:14.116854 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 16:38:09.586915 warp kernel: perf: interrupt took too long (2530 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
могут быть другие сообщения, но это обычный движ, кабеля по 5 метров, потом хабы и нагрузка.
мар 25 16:50:17 warp root[78527]: Setting Provider_1 as main channel!
мар 25 16:51:00 warp root[78632]: node-1 Down!
мар 25 16:51:03 warp root[78634]: node-2 Down!
мар 25 16:51:05 warp root[78636]: Failed Rastr!
мар 25 16:51:08 warp root[78655]: Failed Beeline! disabled
мар 25 16:51:08 warp root[78656]: Rastr status = 0
мар 25 16:51:51 warp root[78824]: node-1 Down!
мар 25 16:51:54 warp root[78849]: node-2 Down!
мар 25 16:51:56 warp root[78869]: Failed Rastr!
мар 25 16:52:00 warp root[78890]: Failed Beeline! disabled
мар 25 16:52:00 warp root[78891]: Rastr status = 0
мар 25 16:52:01 warp audit[78897]: USER_ACCT pid=78897 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_permit acct="xxxxx" exe="/usr/sbin/cron" hos>
мар 25 16:52:01 warp audit[78897]: CRED_ACQ pid=78897 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_permit,pam_ecryptfs acct="xxxxx" exe="/usr/sbin/>
мар 25 16:52:01 warp audit[78897]: SYSCALL arch=c000003e syscall=1 success=yes exit=4 a0=7 a1=7ffcbf452f70 a2=4 a3=0 items=0 ppid=2234 pid=78897 auid=1000 uid=0 gid=0 euid=>
мар 25 16:52:01 warp audit: PROCTITLE proctitle=2F7573722F7362696E2F43524F4E002D66002D50
мар 25 16:52:01 warp CRON[78897]: pam_unix(cron:session): session opened for user xxxxx(uid=1000) by (uid=0)
мар 25 16:52:01 warp audit[78897]: USER_START pid=78897 uid=0 auid=1000 ses=207 msg='op=PAM:session_open grantors=pam_loginuid,pam_env,pam_env,pam_permit,pam_umask,pam_unix>
мар 25 16:52:01 warp CRON[78898]: (xxxxx) CMD (export DISPLAY=:0.0 && export XAUTHORITY=/home/xxxxx/.Xauthority && /usr/local/bin/build-ready-notify)
мар 25 16:52:04 warp audit[78897]: CRED_DISP pid=78897 uid=0 auid=1000 ses=207 msg='op=PAM:setcred grantors=pam_permit,pam_ecryptfs acct="xxxxx" exe="/usr/sbin/cron" hostna>
мар 25 16:52:04 warp audit[78897]: USER_END pid=78897 uid=0 auid=1000 ses=207 msg='op=PAM:session_close grantors=pam_loginuid,pam_env,pam_env,pam_permit,pam_umask,pam_unix,>
мар 25 16:52:04 warp CRON[78897]: pam_unix(cron:session): session closed for user xxxxx
мар 25 16:52:43 warp root[79185]: node-1 Down!
мар 25 16:52:46 warp root[79222]: node-2 Down!
мар 25 16:52:48 warp root[79224]: Failed Rastr!
мар 25 16:52:52 warp root[79266]: Failed Beeline! disabled
мар 25 16:52:52 warp root[79267]: Rastr status = 0
мар 25 16:53:35 warp root[79359]: node-1 Down!
мар 25 16:53:38 warp root[79361]: node-2 Down!
мар 25 16:53:40 warp root[79363]: Failed Rastr!
Тоже всё как обычно. ОЗУ никто не жрёт, сейчас 7 ГБ занято. Вот такое ещё бывает (а бывает и работает) при запуске wine:
C:\windows\system32\explorer.exe: symbol lookup error: /usr/lib/x86_64-linux-gnu/libvulkan_radeon.so: undefined symbol: amdgpu_query_video_caps_info
00e4:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
00e4:err:winediag:nodrv_CreateWindow L"The explorer process failed to start."
У StartWine свой vulkan, игрушки через него.
Исправление c0unt0, :
Наглухо виснет. Даже REISUB не срабатывает. journalctl -o short-precise -k -b -1 journalctl –boot=-1 Тоже смотрел. Вот например:
мар 25 14:39:43.296874 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:39:47.368855 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:13.200843 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:36.880877 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:40.952835 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:49.160834 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:58.304875 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:41:06.996861 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:41:21.136867 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:42:05.740843 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:42:14.116854 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 16:38:09.586915 warp kernel: perf: interrupt took too long (2530 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
могут быть другие сообщения, но это обычный движ, кабеля по 5 метров, потом хабы и нагрузка.
мар 25 16:50:17 warp root[78527]: Setting Provider_1 as main channel!
мар 25 16:51:00 warp root[78632]: node-1 Down!
мар 25 16:51:03 warp root[78634]: node-2 Down!
мар 25 16:51:05 warp root[78636]: Failed Rastr!
мар 25 16:51:08 warp root[78655]: Failed Beeline! disabled
мар 25 16:51:08 warp root[78656]: Rastr status = 0
мар 25 16:51:51 warp root[78824]: node-1 Down!
мар 25 16:51:54 warp root[78849]: node-2 Down!
мар 25 16:51:56 warp root[78869]: Failed Rastr!
мар 25 16:52:00 warp root[78890]: Failed Beeline! disabled
мар 25 16:52:00 warp root[78891]: Rastr status = 0
мар 25 16:52:01 warp audit[78897]: USER_ACCT pid=78897 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_permit acct="xxxxx" exe="/usr/sbin/cron" hos>
мар 25 16:52:01 warp audit[78897]: CRED_ACQ pid=78897 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_permit,pam_ecryptfs acct="xxxxx" exe="/usr/sbin/>
мар 25 16:52:01 warp audit[78897]: SYSCALL arch=c000003e syscall=1 success=yes exit=4 a0=7 a1=7ffcbf452f70 a2=4 a3=0 items=0 ppid=2234 pid=78897 auid=1000 uid=0 gid=0 euid=>
мар 25 16:52:01 warp audit: PROCTITLE proctitle=2F7573722F7362696E2F43524F4E002D66002D50
мар 25 16:52:01 warp CRON[78897]: pam_unix(cron:session): session opened for user xxxxx(uid=1000) by (uid=0)
мар 25 16:52:01 warp audit[78897]: USER_START pid=78897 uid=0 auid=1000 ses=207 msg='op=PAM:session_open grantors=pam_loginuid,pam_env,pam_env,pam_permit,pam_umask,pam_unix>
мар 25 16:52:01 warp CRON[78898]: (xxxxx) CMD (export DISPLAY=:0.0 && export XAUTHORITY=/home/xxxxx/.Xauthority && /usr/local/bin/build-ready-notify)
мар 25 16:52:04 warp audit[78897]: CRED_DISP pid=78897 uid=0 auid=1000 ses=207 msg='op=PAM:setcred grantors=pam_permit,pam_ecryptfs acct="xxxxx" exe="/usr/sbin/cron" hostna>
мар 25 16:52:04 warp audit[78897]: USER_END pid=78897 uid=0 auid=1000 ses=207 msg='op=PAM:session_close grantors=pam_loginuid,pam_env,pam_env,pam_permit,pam_umask,pam_unix,>
мар 25 16:52:04 warp CRON[78897]: pam_unix(cron:session): session closed for user xxxxx
мар 25 16:52:43 warp root[79185]: node-1 Down!
мар 25 16:52:46 warp root[79222]: node-2 Down!
мар 25 16:52:48 warp root[79224]: Failed Rastr!
мар 25 16:52:52 warp root[79266]: Failed Beeline! disabled
мар 25 16:52:52 warp root[79267]: Rastr status = 0
мар 25 16:53:35 warp root[79359]: node-1 Down!
мар 25 16:53:38 warp root[79361]: node-2 Down!
мар 25 16:53:40 warp root[79363]: Failed Rastr!
Тоже всё как обычно. ОЗУ никто не жрёт, сейчас 7 ГБ занято. Вот такое ещё бывает (а бывает и работает) при запуске wine:
C:\windows\system32\explorer.exe: symbol lookup error: /usr/lib/x86_64-linux-gnu/libvulkan_radeon.so: undefined symbol: amdgpu_query_video_caps_info
00e4:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
00e4:err:winediag:nodrv_CreateWindow L"The explorer process failed to start."
У StartWine свой vulkan, игрушки через него.
Исходная версия c0unt0, :
Наглухо виснет. Даже REISUB не срабатывает. journalctl -o short-precise -k -b -1 journalctl –boot=-1 Тоже смотрел. Вот например:
мар 25 14:39:43.296874 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:39:47.368855 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:13.200843 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:36.880877 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:40.952835 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:49.160834 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:40:58.304875 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:41:06.996861 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:41:21.136867 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:42:05.740843 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 14:42:14.116854 warp kernel: usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
мар 25 16:38:09.586915 warp kernel: perf: interrupt took too long (2530 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
могут быть другие сообщения, но это обычный движ, кабеля по 5 метров, потом хабы и нагрузка.
мар 25 16:50:17 warp root[78527]: Setting Provider_1 as main channel!
мар 25 16:51:00 warp root[78632]: node-1 Down!
мар 25 16:51:03 warp root[78634]: node-2 Down!
мар 25 16:51:05 warp root[78636]: Failed Rastr!
мар 25 16:51:08 warp root[78655]: Failed Beeline! disabled
мар 25 16:51:08 warp root[78656]: Rastr status = 0
мар 25 16:51:51 warp root[78824]: node-1 Down!
мар 25 16:51:54 warp root[78849]: node-2 Down!
мар 25 16:51:56 warp root[78869]: Failed Rastr!
мар 25 16:52:00 warp root[78890]: Failed Beeline! disabled
мар 25 16:52:00 warp root[78891]: Rastr status = 0
мар 25 16:52:01 warp audit[78897]: USER_ACCT pid=78897 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_permit acct="xxxxx" exe="/usr/sbin/cron" hos>
мар 25 16:52:01 warp audit[78897]: CRED_ACQ pid=78897 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_permit,pam_ecryptfs acct="xxxxx" exe="/usr/sbin/>
мар 25 16:52:01 warp audit[78897]: SYSCALL arch=c000003e syscall=1 success=yes exit=4 a0=7 a1=7ffcbf452f70 a2=4 a3=0 items=0 ppid=2234 pid=78897 auid=1000 uid=0 gid=0 euid=>
мар 25 16:52:01 warp audit: PROCTITLE proctitle=2F7573722F7362696E2F43524F4E002D66002D50
мар 25 16:52:01 warp CRON[78897]: pam_unix(cron:session): session opened for user xxxxx(uid=1000) by (uid=0)
мар 25 16:52:01 warp audit[78897]: USER_START pid=78897 uid=0 auid=1000 ses=207 msg='op=PAM:session_open grantors=pam_loginuid,pam_env,pam_env,pam_permit,pam_umask,pam_unix>
мар 25 16:52:01 warp CRON[78898]: (xxxxx) CMD (export DISPLAY=:0.0 && export XAUTHORITY=/home/xxxxx/.Xauthority && /usr/local/bin/build-ready-notify)
мар 25 16:52:04 warp audit[78897]: CRED_DISP pid=78897 uid=0 auid=1000 ses=207 msg='op=PAM:setcred grantors=pam_permit,pam_ecryptfs acct="xxxxx" exe="/usr/sbin/cron" hostna>
мар 25 16:52:04 warp audit[78897]: USER_END pid=78897 uid=0 auid=1000 ses=207 msg='op=PAM:session_close grantors=pam_loginuid,pam_env,pam_env,pam_permit,pam_umask,pam_unix,>
мар 25 16:52:04 warp CRON[78897]: pam_unix(cron:session): session closed for user xxxxx
мар 25 16:52:43 warp root[79185]: node-1 Down!
мар 25 16:52:46 warp root[79222]: node-2 Down!
мар 25 16:52:48 warp root[79224]: Failed Rastr!
мар 25 16:52:52 warp root[79266]: Failed Beeline! disabled
мар 25 16:52:52 warp root[79267]: Rastr status = 0
мар 25 16:53:35 warp root[79359]: node-1 Down!
мар 25 16:53:38 warp root[79361]: node-2 Down!
мар 25 16:53:40 warp root[79363]: Failed Rastr!
Тоже всё как обычно. ОЗУ никто не жрёт, сейчас 7 ГБ занято.