История изменений
Исправление Zubok, (текущая версия) :
вроде что-то уже напрогано в mainline. Надо разобраться, куда это ведет дальше. там доступ через регистры в памяти
Точно не уверен, но похоже, что в драйвере эти пины (SDP) принудительно конфигурируются для PTP (IEEE 1588).
1.4.8 Software-Definable Pins (SDP) Interface (General-Purpose I/O)
The I350 has four software-defined pins (SDP pins) per port that can be used for IEEE1588 auxiliary device connections, control of the SFP optical module interface, passing thermal sensor limit indication and other miscellaneous hardware or software-control purposes. These pins can be individually configurable to act as either standard inputs, general-purpose interrupt (GPI) inputs or output pins. The default direction of each pin is configurable via the EEPROM (refer to Section 6.2.21, Section 8.2.1 and Section 8.2.3), as well as the default value of all pins configured as outputs. Information on SDP usage can be found in Section 3.4 and Section 7.9.4. Refer to Section 2.3.5 for pin description of this interface.
Исходная версия Zubok, :
вроде что-то уже напрогано в mainline. Надо разобраться, куда это ведет дальше. там доступ через регистры в памяти
Точно не уверен, но похоже, что в драйвере эти пины (SDP) для PTP (IEEE 1588) принудительно конфигурируются.
1.4.8 Software-Definable Pins (SDP) Interface (General-Purpose I/O)
The I350 has four software-defined pins (SDP pins) per port that can be used for IEEE1588 auxiliary device connections, control of the SFP optical module interface, passing thermal sensor limit indication and other miscellaneous hardware or software-control purposes. These pins can be individually configurable to act as either standard inputs, general-purpose interrupt (GPI) inputs or output pins. The default direction of each pin is configurable via the EEPROM (refer to Section 6.2.21, Section 8.2.1 and Section 8.2.3), as well as the default value of all pins configured as outputs. Information on SDP usage can be found in Section 3.4 and Section 7.9.4. Refer to Section 2.3.5 for pin description of this interface.