История изменений

Исправление xwicked, 08.06.23 00:49 (текущая версия) :

Ага.

sudo smartctl -i -a /dev/sdb
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-148-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Plextor M3/M5/M6 Series SSDs
Device Model:     PLEXTOR PX-128M5Pro
Serial Number:    P02416102442
LU WWN Device Id: 5 002303 1001bf54d
Add. Product Id:  DC7020B0
Firmware Version: 1.06
User Capacity:    128 035 676 160 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Jun  8 00:32:32 2023 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   10) seconds.
Offline data collection
capabilities: 			 (0x15) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Abort Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0002)	Does not save SMART data before
					entering power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x00)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  10) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0003   100   100   070    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0003   100   100   000    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -       829
 12 Power_Cycle_Count       0x0002   100   100   000    Old_age   Always       -       3764
177 Wear_Leveling_Count     0x0003   100   100   000    Pre-fail  Always       -       153048
178 Used_Rsvd_Blk_Cnt_Chip  0x0003   100   100   000    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0003   100   100   000    Pre-fail  Always       -       0
182 Erase_Fail_Count_Total  0x0003   100   100   000    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0002   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0003   100   100   000    Pre-fail  Always       -       557
196 Reallocated_Event_Count 0x0003   100   100   000    Pre-fail  Always       -       0
198 Offline_Uncorrectable   0x0003   100   100   000    Pre-fail  Always       -       0
199 UDMA_CRC_Error_Count    0x0003   100   100   000    Pre-fail  Always       -       39
232 Available_Reservd_Space 0x0003   100   100   010    Pre-fail  Always       -       0
241 Host_Writes_32MiB       0x0003   100   100   000    Pre-fail  Always       -       221069
242 Host_Reads_32MiB        0x0003   100   100   000    Pre-fail  Always       -       151043

SMART Error Log Version: 0
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

И что я тут должен буду увидеть?

  9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -       829

Т0же самое.

199 UDMA_CRC_Error_Count    0x0003   100   100   000    Pre-fail  Always       -       39

А вот это что, типа какие-то CRC ошибки всё-таки есть?

Исправление xwicked, 08.06.23 00:48:

Ага.

sudo smartctl -i -a /dev/sdb
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-148-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Plextor M3/M5/M6 Series SSDs
Device Model:     PLEXTOR PX-128M5Pro
Serial Number:    P02416102442
LU WWN Device Id: 5 002303 1001bf54d
Add. Product Id:  DC7020B0
Firmware Version: 1.06
User Capacity:    128 035 676 160 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Jun  8 00:32:32 2023 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   10) seconds.
Offline data collection
capabilities: 			 (0x15) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Abort Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0002)	Does not save SMART data before
					entering power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x00)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  10) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0003   100   100   070    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0003   100   100   000    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -       829
 12 Power_Cycle_Count       0x0002   100   100   000    Old_age   Always       -       3764
177 Wear_Leveling_Count     0x0003   100   100   000    Pre-fail  Always       -       153048
178 Used_Rsvd_Blk_Cnt_Chip  0x0003   100   100   000    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0003   100   100   000    Pre-fail  Always       -       0
182 Erase_Fail_Count_Total  0x0003   100   100   000    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0002   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0003   100   100   000    Pre-fail  Always       -       557
196 Reallocated_Event_Count 0x0003   100   100   000    Pre-fail  Always       -       0
198 Offline_Uncorrectable   0x0003   100   100   000    Pre-fail  Always       -       0
199 UDMA_CRC_Error_Count    0x0003   100   100   000    Pre-fail  Always       -       39
232 Available_Reservd_Space 0x0003   100   100   010    Pre-fail  Always       -       0
241 Host_Writes_32MiB       0x0003   100   100   000    Pre-fail  Always       -       221069
242 Host_Reads_32MiB        0x0003   100   100   000    Pre-fail  Always       -       151043

SMART Error Log Version: 0
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

И что я тут должен буду увидеть?

  9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -       829

Т0же самое.

199 UDMA_CRC_Error_Count    0x0003   100   100   000    Pre-fail  Always       -       39

А вот это что, типа какие-то CRC ошибки всё-таки есть?

Исправление xwicked, 08.06.23 00:39:

Ага.

sudo smartctl -i -a /dev/sdb
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-148-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Plextor M3/M5/M6 Series SSDs
Device Model:     PLEXTOR PX-128M5Pro
Serial Number:    P02416102442
LU WWN Device Id: 5 002303 1001bf54d
Add. Product Id:  DC7020B0
Firmware Version: 1.06
User Capacity:    128 035 676 160 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Jun  8 00:32:32 2023 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   10) seconds.
Offline data collection
capabilities: 			 (0x15) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Abort Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0002)	Does not save SMART data before
					entering power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x00)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  10) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0003   100   100   070    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0003   100   100   000    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -       829
 12 Power_Cycle_Count       0x0002   100   100   000    Old_age   Always       -       3764
177 Wear_Leveling_Count     0x0003   100   100   000    Pre-fail  Always       -       153048
178 Used_Rsvd_Blk_Cnt_Chip  0x0003   100   100   000    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0003   100   100   000    Pre-fail  Always       -       0
182 Erase_Fail_Count_Total  0x0003   100   100   000    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0002   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0003   100   100   000    Pre-fail  Always       -       557
196 Reallocated_Event_Count 0x0003   100   100   000    Pre-fail  Always       -       0
198 Offline_Uncorrectable   0x0003   100   100   000    Pre-fail  Always       -       0
199 UDMA_CRC_Error_Count    0x0003   100   100   000    Pre-fail  Always       -       39
232 Available_Reservd_Space 0x0003   100   100   010    Pre-fail  Always       -       0
241 Host_Writes_32MiB       0x0003   100   100   000    Pre-fail  Always       -       221069
242 Host_Reads_32MiB        0x0003   100   100   000    Pre-fail  Always       -       151043

SMART Error Log Version: 0
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

И что я тут должен буду увидеть?

  9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -       829

Т0же самое.

Исходная версия xwicked, 08.06.23 00:37:

Ага.

sudo smartctl -i -a /dev/sdb
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-148-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Plextor M3/M5/M6 Series SSDs
Device Model:     PLEXTOR PX-128M5Pro
Serial Number:    P02416102442
LU WWN Device Id: 5 002303 1001bf54d
Add. Product Id:  DC7020B0
Firmware Version: 1.06
User Capacity:    128 035 676 160 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Jun  8 00:32:32 2023 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   10) seconds.
Offline data collection
capabilities: 			 (0x15) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Abort Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0002)	Does not save SMART data before
					entering power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x00)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  10) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0003   100   100   070    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0003   100   100   000    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -       829
 12 Power_Cycle_Count       0x0002   100   100   000    Old_age   Always       -       3764
177 Wear_Leveling_Count     0x0003   100   100   000    Pre-fail  Always       -       153048
178 Used_Rsvd_Blk_Cnt_Chip  0x0003   100   100   000    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0003   100   100   000    Pre-fail  Always       -       0
182 Erase_Fail_Count_Total  0x0003   100   100   000    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0002   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0003   100   100   000    Pre-fail  Always       -       557
196 Reallocated_Event_Count 0x0003   100   100   000    Pre-fail  Always       -       0
198 Offline_Uncorrectable   0x0003   100   100   000    Pre-fail  Always       -       0
199 UDMA_CRC_Error_Count    0x0003   100   100   000    Pre-fail  Always       -       39
232 Available_Reservd_Space 0x0003   100   100   010    Pre-fail  Always       -       0
241 Host_Writes_32MiB       0x0003   100   100   000    Pre-fail  Always       -       221069
242 Host_Reads_32MiB        0x0003   100   100   000    Pre-fail  Always       -       151043

SMART Error Log Version: 0
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

И что я тут должен буду увидеть?