OpenWRT настройка маршрутизации
Форум — General
Роутер TP-Link WR841NDv7.2. На нем установлена OpenWrt Chaos Calmer, 15.05.
Помогите составить таблицу маршрутизации как на стоковой прошивке.
Сток до подключения l2tp:http://s015.radikal.ru/i333/1601/34/aa72db96bdec.png
Сток после подключения l2tp:http://s016.radikal.ru/i335/1601/e3/6eaed1f18e9a.png
OpenWRT до подключения l2tp:
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.130.109.1 0.0.0.0 UG 0 0 0 eth1
10.130.109.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
10.130.109.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth1
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br-lanOpenWRT во время подключения l2tp:
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 83.167.66.16 0.0.0.0 UG 0 0 0 l2tp1
10.130.109.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
10.130.109.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth1
83.167.66.16 10.130.109.1 255.255.255.255 UGH 0 0 0 eth1
83.167.66.16 0.0.0.0 255.255.255.255 UH 0 0 0 l2tp1
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br-lanПриетом сайты пингуются но не открываются.
PING dev.openwrt.org (217.115.15.26): 56 data bytes
4 bytes from 217.115.15.26: seq=0 ttl=59 time=89.529 ms
64 bytes from 217.115.15.26: seq=1 ttl=59 time=90.063 ms
64 bytes from 217.115.15.26: seq=2 ttl=59 time=89.441 ms
64 bytes from 217.115.15.26: seq=3 ttl=59 time=89.194 ms
64 bytes from 217.115.15.26: seq=4 ttl=59 time=89.398 ms
--- dev.openwrt.org ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 89.194/89.525/90.063 mstraceroute to dev.openwrt.org (217.115.15.26), 30 hops max, 38 byte packets
1 83.167.66.16 0.874 ms
2 91.135.147.213 20.620 ms
3 31.28.19.100 20.132 ms
4 80.81.193.12 88.708 ms
5 217.115.0.163 76.851 ms
6 217.115.0.169 89.436 ms
7 217.115.15.26 88.843 msСистемный лог:
Fri Jan 15 09:21:18 2016 daemon.debug pppd[1315]: rcvd [CHAP Success id=0x1 "Auth ok\n"]
Fri Jan 15 09:21:18 2016 daemon.info pppd[1315]: CHAP authentication succeeded: Auth ok^J
Fri Jan 15 09:21:18 2016 daemon.notice pppd[1315]: CHAP authentication succeeded
Fri Jan 15 09:21:18 2016 daemon.debug pppd[1315]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
Fri Jan 15 09:21:18 2016 daemon.debug pppd[1315]: rcvd [IPCP ConfReq id=0x1 <addr 83.167.66.16>]
Fri Jan 15 09:21:18 2016 daemon.debug pppd[1315]: sent [IPCP ConfAck id=0x1 <addr 83.167.66.16>]
Fri Jan 15 09:21:18 2016 daemon.debug pppd[1315]: rcvd [IPCP ConfNak id=0x1 <addr 178.78.63.249>]
Fri Jan 15 09:21:18 2016 daemon.debug pppd[1315]: sent [IPCP ConfReq id=0x2 <addr 178.78.63.249>]
Fri Jan 15 09:21:18 2016 daemon.debug pppd[1315]: rcvd [IPCP ConfAck id=0x2 <addr 178.78.63.249>]
Fri Jan 15 09:21:18 2016 daemon.debug pppd[1315]: Script /etc/ppp/ip-pre-up started (pid 1327)
Fri Jan 15 09:21:18 2016 daemon.debug pppd[1315]: Script /etc/ppp/ip-pre-up finished (pid 1327), status = 0x0
Fri Jan 15 09:21:18 2016 daemon.notice pppd[1315]: local IP address 178.78.63.249
Fri Jan 15 09:21:18 2016 daemon.notice pppd[1315]: remote IP address 83.167.66.16
Fri Jan 15 09:21:18 2016 daemon.debug pppd[1315]: Script /etc/ppp/ip-up started (pid 1332)
Fri Jan 15 09:21:18 2016 daemon.debug pppd[1315]: Script /etc/ppp/ip-up finished (pid 1332), status = 0x1
Fri Jan 15 09:21:19 2016 daemon.debug pppd[1315]: sent [LCP EchoReq id=0x1 magic=0xa9224e04]
Fri Jan 15 09:21:19 2016 daemon.debug pppd[1315]: rcvd [LCP EchoRep id=0x1 magic=0x50afd379]
Fri Jan 15 09:21:20 2016 daemon.debug pppd[1315]: sent [LCP EchoReq id=0x2 magic=0xa9224e04]
Fri Jan 15 09:21:20 2016 daemon.debug pppd[1315]: rcvd [LCP EchoRep id=0x2 magic=0x50afd379]
Fri Jan 15 09:21:21 2016 daemon.debug pppd[1315]: sent [LCP EchoReq id=0x3 magic=0xa9224e04]
Fri Jan 15 09:21:21 2016 daemon.debug pppd[1315]: rcvd [LCP EchoRep id=0x3 magic=0x50afd379]