sudo ./sasc-ng -j 0:1 --cam-budget --sid-allpid --sid-nocache --cam-dir /home/mannaz/dvb/camfiles
Sep 28 20:44:51.053 : Version: 0.0.2-Unknown
Sep 28 20:44:51.054 CAM: initializing plugin: SoftCam (1.0.0pre-Unknown): A software emulated CAM
Sep 28 20:44:51.054 CAM(general.info): SC version 1.0.0pre-Unknown initializing (VDR 1.6.0)
Sep 28 20:44:51.054 CAM: starting plugin:
Sep 28 20:44:51.054 CAM(general.info): SC version 1.0.0pre-Unknown starting (VDR 1.6.0)
Sep 28 20:44:51.054 CAM(core.load): ** Plugin config:
Sep 28 20:44:51.054 CAM(core.load): ** Key updates (AU) are enabled (active CAIDs) (no prestart)
Sep 28 20:44:51.054 CAM(core.load): ** Local systems DON'T take priority over cached remote
Sep 28 20:44:51.055 CAM(core.load): ** Concurrent FF recordings are NOT allowed
Sep 28 20:44:51.055 CAM(core.load): ** Force transfermode with digital audio
Sep 28 20:44:51.055 CAM(core.load): ** ECM cache is set to enabled
Sep 28 20:44:51.055 CAM(core.load): ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Sep 28 20:44:51.055 CAM(general.info): loading cardclient config from /home/mannaz/dvb/camfiles/cardclient.conf
Sep 28 20:44:51.055 CAM(cardclient.newcamd): now using protocol version 525 (cdLen=8)
Sep 28 20:44:51.055 CAM(cardclient.core): hostname=cserv17.net port=14450 emm=0 emmCaids 0652/ffff
Sep 28 20:44:51.055 CAM(cardclient.core): Newcamd: username=xxxxxxxx password=xxxxxxxx key=0102030405060708091011121314
Sep 28 20:44:51.055 CAM(cardclient.core): client 'Newcamd' ready
Sep 28 20:44:51.163 CAM(core.net): connecting to cserv17.net:14450/tcp (92.243.77.50)
Sep 28 20:44:52.114 CAM(cardclient.login): Newcamd: CaID=0652 admin=0 srvUA=0000000000000000 provider 000015/0000000000000000 000000/0000000000000000
Sep 28 20:44:52.115 CAM(general.error): failed open /home/mannaz/dvb/camfiles/SoftCam.Key: No such file or directory
Sep 28 20:44:52.115 CAM(general.error): failed open /home/mannaz/dvb/camfiles/smartcard.conf: No such file or directory
Sep 28 20:44:52.115 CAM(general.error): failed open /home/mannaz/dvb/camfiles/cardslot.conf: No such file or directory
Sep 28 20:44:52.115 CAM(general.error): failed open /home/mannaz/dvb/camfiles/override.conf: No such file or directory
Sep 28 20:44:52.115 CAM(general.error): no keys loaded for softcam!
Sep 28 20:44:52.115 CAM(core.load): ** registered systems:
Sep 28 20:44:52.115 CAM(core.load): ** Cardclient        (pri -15)
Sep 28 20:44:52.115 CAM(core.load): ** Conax             (pri -10)
Sep 28 20:44:52.115 CAM(core.load): ** ConstCW           (pri -20)
Sep 28 20:44:52.115 CAM(core.load): ** Cryptoworks       (pri -10)
Sep 28 20:44:52.115 CAM(core.load): ** Irdeto            (pri -10)
Sep 28 20:44:52.115 CAM(core.load): ** Irdeto2           (pri  -8)
Sep 28 20:44:52.115 CAM(core.load): ** Nagra             (pri -10)
Sep 28 20:44:52.115 CAM(core.load): ** Nagra2            (pri -10)
Sep 28 20:44:52.115 CAM(core.load): ** Fake-NDS          (pri -12)
Sep 28 20:44:52.115 CAM(core.load): ** SC-Conax          (pri  -5)
Sep 28 20:44:52.115 CAM(core.load): ** SC-Cryptoworks    (pri  -5)
Sep 28 20:44:52.115 CAM(core.load): ** SC-Irdeto         (pri  -5)
Sep 28 20:44:52.115 CAM(core.load): ** SC-Nagra          (pri  -5)
Sep 28 20:44:52.115 CAM(core.load): ** SC-Seca           (pri  -5)
Sep 28 20:44:52.116 CAM(core.load): ** SC-Viaccess       (pri  -5)
Sep 28 20:44:52.116 CAM(core.load): ** SC-VideoGuard2    (pri  -5)
Sep 28 20:44:52.116 CAM(core.load): ** Seca              (pri -10)
Sep 28 20:44:52.116 CAM(core.load): ** @SHL              (pri -10)
Sep 28 20:44:52.116 CAM(core.load): ** Viaccess          (pri -10)
Sep 28 20:44:53.125 demux: Starting thread on /dev/dvb/adapter1/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Sep 28 20:44:53.125 frontend: Starting thread on /dev/dvb/adapter1/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Sep 28 20:44:53.125 dvr: Starting thread on /dev/dvb/adapter1/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Sep 28 20:44:53.126 : Listening on port 5456
Sep 28 20:44:58.379 CHANNEL: Clearing tuning cache due to switch cmd
Sep 28 20:44:58.379 CHANNEL: Clearing tuning cache due to switch cmd
Sep 28 20:44:58.490 CHANNEL: Clearing tuning cache due to switch cmd
Sep 28 20:44:58.570 CHANNEL: Clearing tuning cache due to switch cmd
Sep 28 20:44:58.585 CHANNEL: Clearing tuning cache due to switch cmd
Sep 28 20:44:59.586 CHANNEL: Tuning frontend
Sep 28 20:44:59.586 CSA: Got command(1): I idx: 0 pid: 0
Sep 28 20:44:59.799 CHANNEL: start: read pes returned err: 11
start: read pes returned: Resource temporarily unavailable
Sep 28 20:45:00.199 CHANNEL: start: read pes returned err: 11
start: read pes returned: Resource temporarily unavailable
Sep 28 20:45:00.600 CHANNEL: start: read pes returned err: 11
start: read pes returned: Resource temporarily unavailable
Sep 28 20:45:01.001 CHANNEL: start: read pes returned err: 11
start: read pes returned: Resource temporarily unavailable
Sep 28 20:45:01.593 CHANNEL: start: read pes returned err: 11
start: read pes returned: Resource temporarily unavailable
Sep 28 20:45:01.593 CHANNEL: read_nit expected table 0x40  or 0x41 but got 0x00
Orbit: 00000750E
Sep 28 20:46:52.392 CAM(core.net): idle timeout, disconnected cserv17.net:14450

# Script to automate running of SASC-NG and Drivers 

# Driver directory 
DRIVERDIR="/home/mannaz/dvb" 
# Path to SASC-NG binary 
SASCPRG="/home/mannaz/dvb" 
# Path to CAM Directory 
CAMDIR="/home/mannaz/dvb/camfiles/" 
# Number of DVB Cards you have in your system dedicated to SASC-NG 
ADAPTERS="1" 
# Startup Options passed to SASC-NG.  Adjust according to your devices. 
#OPTIONS="-r 0 -v 2 -o" 
OPTIONS="-j 0:1  --cam-budget --sid-allpid --sid-nocache --cam-dir" 
# Number of times runsasc will attempt to restart SASC-NG after a crash has occured (set to 0 for no limit) 
MAXTRIES=10 
# Minimum runtime required (in seconds) for SASC-NG to continue restart attempts 
MINRUN=20 

## End Configuration Section ## 

SASCCMD="$SASCPRG $OPTIONS $CAMDIR" 
KILL="/usr/bin/killall -q -TERM" 

# Detect whether the DVBLooopback driver is already loaded 
# and return 0 if it *is* loaded, 1 if not: 

function DriverLoaded() 
{ 
  grep -qse dvbloopback /proc/modules 
} 

# Load all DVBLoopback driver modules needed for your hardware: 

function LoadDriver() 
{ 
  modprobe dvbloopback num_adapters=$ADAPTERS 
  sleep 5 
} 

# Unload all DVBLoopback driver modules loaded in LoadDriver(): 
function UnloadDriver() 
{ 
  rmmod dvbloopback
} 

# Load driver if it hasn't been loaded already: 
if ! DriverLoaded; then 
   LoadDriver 
   fi 

LASTRESTART=$(date +%s) 
LOOPCOUNT=0 
while (true) do 
      if [ $LOOPCOUNT -le $MAXTRIES ] || [ $MAXTRIES -eq 0 ] ; then 
        eval "screen -D -m -S sasc-ng $SASCCMD &" 
        # Wait for SASC-NG to initialize then do rest 
        sleep 10 
        touch /tmp/SASC_COMPLETE 
      else 
        $KILL runsasc 
      fi 
      # Remember PID of SASC-NG process 
      PID=$! 
      # Wait for SASC-NG to end or signal to arrive 
      wait $PID 
      # Remember return value of SASC-NG 
      RET=$? 
      if test $RET -eq 0 -o $RET -eq 2; then exit; fi 
      TIMEOFDEATH=$(date +%s) 
      RUNTIME=$((TIMEOFDEATH - LASTRESTART)) 
      if [ $TIMEOFDEATH -le $(($LASTRESTART + $MINRUN)) ] ; then 
        echo "`date` SASC-NG crashed in $RUNTIME seconds. Minimum required runtime for SASC-NG is $MINRUN seconds. Killing runsasc process..." 
        $KILL runsasc 
      fi 
      echo "`date` Reloading DVBLoopback drivers" 
      $KILL sasc-ng 
      sleep 10 
      UnloadDriver 
      LoadDriver 
      LASTRESTART=$(date +%s) 
      LOOPCOUNT=$((LOOPCOUNT+1)) 
      echo "`date` Restarting SASC-NG $LOOPCOUNT time(s). Maximum retries set to $MAXTRIES" 
      done

http {port 1238;};
adapter0 {

packet-buffer 50;
stat-interval 120;
dvb-s {

lnb {lof1 9750000;lof2 10600000;slof 11700000;};
transponder {frequency 12670000;polarisation v;symbol-rate 22000000;};

};
stream {name 2x2;input {pnr 200;};output-http {url /tv/2x2;};};
};