LINUX.ORG.RU

Сообщения stas_on

 

debian gallium no fast 3d radeon удручает

Форум — Desktop

здравствуйте!
всё стоит(фирмваре, меса, хорг-радеон), лог загрузки чистый идеально
но нет нормальной скорости 3д

stan@serenity:~$ glxinfo | grep Open
OpenGL vendor string: X.Org R300 Project
OpenGL renderer string: Gallium 0.4 on ATI RV530
OpenGL version string: 2.1 Mesa 7.10.3
OpenGL shading language version string: 1.20
OpenGL extensions:

stan@serenity:~$ glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: Gallium 0.4 on ATI RV530
GL_NV_blend_square, GL_NV_conditional_render, GL_NV_light_max_exponent,

(II) LoadModule: «dbe»
[ 19.863] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19.882] (II) Module dbe: vendor=«X.Org Foundation»
[ 19.882] compiled for 1.10.2.902, module version = 1.0.0
[ 19.882] Module class: X.Org Server Extension
[ 19.882] ABI class: X.Org Server Extension, version 5.0
[ 19.882] (II) Loading extension DOUBLE-BUFFER
[ 19.882] (II) LoadModule: «glx»
[ 19.882] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 19.953] (II) Module glx: vendor=«X.Org Foundation»
[ 19.953] compiled for 1.10.2.902, module version = 1.0.0
[ 19.953] ABI class: X.Org Server Extension, version 5.0
[ 19.953] (==) AIGLX enabled
[ 19.953] (II) Loading extension GLX
[ 19.955] (II) LoadModule: «record»
[ 19.955] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 19.967] (II) Module record: vendor=«X.Org Foundation»
[ 19.967] compiled for 1.10.2.902, module version = 1.13.0
[ 19.967] Module class: X.Org Server Extension
[ 19.967] ABI class: X.Org Server Extension, version 5.0
[ 19.968] (II) Loading extension RECORD
[ 19.968] (II) LoadModule: «dri»
[ 19.968] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 19.983] (II) Module dri: vendor=«X.Org Foundation»
[ 19.983] compiled for 1.10.2.902, module version = 1.0.0
[ 19.983] ABI class: X.Org Server Extension, version 5.0
[ 19.983] (II) Loading extension XFree86-DRI
[ 19.983] (II) LoadModule: «dri2»
[ 19.983] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.000] (II) Module dri2: vendor=«X.Org Foundation»
[ 20.000] compiled for 1.10.2.902, module version = 1.2.0
[ 20.000] ABI class: X.Org Server Extension, version 5.0
[ 20.000] (II) Loading extension DRI2
[ 20.000] (==) Matched ati as autoconfigured driver 0
[ 20.000] (==) Matched vesa as autoconfigured driver 1
[ 20.000] (==) Matched fbdev as autoconfigured driver 2
[ 20.000] (==) Assigned the driver to the xf86ConfigLayout
[ 20.000] (II) LoadModule: «ati»
[ 20.000] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 20.005] (II) Module ati: vendor=«X.Org Foundation»
[ 20.005] compiled for 1.10.1, module version = 6.14.2
[ 20.005] Module class: X.Org Video Driver
[ 20.005] ABI class: X.Org Video Driver, version 10.0
[ 20.005] (II) LoadModule: «radeon»
[ 20.005] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 20.124] (II) Module radeon: vendor=«X.Org Foundation»
[ 20.124] compiled for 1.10.1, module version = 6.14.2
[ 20.124] Module class: X.Org Video Driver
[ 20.124] ABI class: X.Org Video Driver, version 10.0
[ 20.129] (II) LoadModule: «vesa»
[ 20.129] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 20.141] (II) Module vesa: vendor=«X.Org Foundation»
[ 20.141] compiled for 1.10.2, module version = 2.3.0
[ 20.141] Module class: X.Org Video Driver
[ 20.141] ABI class: X.Org Video Driver, version 10.0
[ 20.141] (II) LoadModule: «fbdev»
[ 20.141] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 20.252] (II) Module fbdev: vendor=«X.Org Foundation»
[ 20.252] compiled for 1.10.1, module version = 0.4.2
[ 20.252] ABI class: X.Org Video Driver, version 10.0
[ 20.252] (II) RADEON: Driver for ATI Radeon chipsets:

S
[ 20.256] (II) VESA: driver for VESA chipsets: vesa
[ 20.256] (II) FBDEV: driver for framebuffer: fbdev
[ 20.256] (++) using VT number 7

[ 20.263] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 20.264] (II) [KMS] Kernel modesetting enabled.
[ 20.264] (WW) Falling back to old probe method for vesa
[ 20.264] (WW) Falling back to old probe method for fbdev
[ 20.264] (II) Loading sub module «fbdevhw»
[ 20.264] (II) LoadModule: «fbdevhw»
[ 20.264] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 20.386] (II) Module fbdevhw: vendor=«X.Org Foundation»
[ 20.386] compiled for 1.10.2.902, module version = 0.0.2
[ 20.386] ABI class: X.Org Video Driver, version 10.0
[ 20.386] (II) RADEON(0): Creating default Display subsection in Screen section
«Default Screen Section» for depth/fbbpp 24/32
[ 20.386] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 20.386] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 20.386] (==) RADEON(0): Default visual is TrueColor
[ 20.386] (==) RADEON(0): RGB weight 888
[ 20.386] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 20.386] (--) RADEON(0): Chipset: «ATI Radeon X1600» (ChipID = 0x71c2)
[ 20.386] (II) RADEON(0): PCIE card detected
[ 20.386] drmOpenDevice: node name is /dev/dri/card0
[ 20.386] drmOpenDevice: open result is 9, (OK)
[ 20.386] drmOpenByBusid: Searching for BusID pci:0000:05:00.0
[ 20.386] drmOpenDevice: node name is /dev/dri/card0
[ 20.386] drmOpenDevice: open result is 9, (OK)
[ 20.386] drmOpenByBusid: drmOpenMinor returns 9
[ 20.386] drmOpenByBusid: drmGetBusid reports pci:0000:05:00.0
[ 20.387] (II) Loading sub module «exa»
[ 20.387] (II) LoadModule: «exa»
[ 20.387] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 20.405] (II) Module exa: vendor=«X.Org Foundation»
[ 20.405] compiled for 1.10.2.902, module version = 2.5.0
[ 20.405] ABI class: X.Org Video Driver, version 10.0
[ 20.405] (II) RADEON(0): KMS Color Tiling: enabled
[ 20.405] (II) RADEON(0): KMS Pageflipping: enabled
[ 20.405] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 20.452] (II) RADEON(0): Output VGA-0 has no monitor section
[ 20.500] (II) RADEON(0): Output S-video has no monitor section
[ 20.559] (II) RADEON(0): Output DVI-0 has no monitor section
[ 20.608] (II) RADEON(0): EDID for output VGA-0
[ 20.656] (II) RADEON(0): EDID for output S-video
[ 20.713] (II) RADEON(0): EDID for output DVI-0



stan@serenity:~$ glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
284 frames in 5.0 seconds = 56.616 FPS
301 frames in 5.0 seconds = 60.014 FPS
301 frames in 5.0 seconds = 60.009 FPS

помогите врубить 3Д РЕАЛЬНО!

stas_on
()

radeon debian DRI DRM беспросвет

Форум — Desktop

всем доброе время суток
с аппаратным ускорением - прямо беспросветная фигня
ну не работает и всё тут :(

ужо и все модули xorg вроде переставил - всё равно не работает ускорение
помогите плиз включить

Linux 2.6.32-5-amd64 #1 SMP Thu Nov 25 18:02:11 UTC 2010 x86_64 GNU/Linux

$ LIBGL_DEBUG=verbose glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_EXT_texture_from_pixmap
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 1.4 (2.1 Mesa 7.7.1)
OpenGL extensions:




stas_on
()

непонятки с iptables полные (кто рулит пакетами?)

Форум — Admin

Здравствуйте!

есть такая ситуация: интернет через pppoe по лановскому кабелю

но

немогу из внешки не один порт открыть - как не настраивай фаервол

испробованы: guarddog, firestarter, anno-firewall - тухляк.. (правила составляются красивые, - а порты не открываются для доступа из внешки)

при таких раскладах раздача торрентов чуть больше, чем мертва :(

исходные данные:
ifconfig
eth0 Link encap:Ethernet HWaddr 00:14:85:27:97:00
inet addr:10.97.10.23 Bcast:10.97.10.63 Mask:255.255.255.192
inet6 addr: fe80::214:85ff:fe27:9700/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1818876 errors:0 dropped:0 overruns:0 frame:0
TX packets:1459680 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2664931046 (2.4 GiB) TX bytes:124214278 (118.4 MiB)
Interrupt:23 Base address:0xe000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:680 errors:0 dropped:0 overruns:0 frame:0
TX packets:680 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:39320 (38.3 KiB) TX bytes:39320 (38.3 KiB)

ppp0 Link encap:Point-to-Point Protocol
inet addr:94.41.91.36 P-t-P:92.50.178.10 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1460 Metric:1
RX packets:28450 errors:0 dropped:0 overruns:0 frame:0
TX packets:29722 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:26632510 (25.3 MiB) TX bytes:2488444 (2.3 MiB)


iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT all  — anywhere anywhere

Chain FORWARD (policy DROP)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination
ACCEPT all  — anywhere anywhere


при таком конфиге debian testing фильтруется чем то подозрительным

возникает резонный вопрос: кто же тогда порты фильтрует, если игнорируются скрипты от firestarter и guarddog (они и понятные и приминяются без ошибок, но порты всё равно остаются закрытыми )

stas_on
()

debian dhcp broken

Форум — Desktop

Привет всем!
с недавних пор поломался роутинг, получаемый по дшсп :(
очень грустно без интернета
помогите плиз

вот таблица роутинга при поднятой локалке провайдера под виндой

C:\Documents and Settings\stas-ON>route PRINT
===========================================================================
Список интерфейсов
0x1 ........................... MS TCP Loopback interface
0x2 ...00 14 85 27 97 00 ...... NVIDIA nForce Networking Controller - ╠шэшяюЁЄ
ырэшЁют∙шър яръхЄют
===========================================================================
===========================================================================
Активные маршруты:
Сетевой адрес Маска сети Адрес шлюза Интерфейс Метрика
0.0.0.0 0.0.0.0 10.97.10.1 10.97.10.28 20
10.97.10.0 255.255.255.192 10.97.10.28 10.97.10.28 20
10.97.10.28 255.255.255.255 127.0.0.1 127.0.0.1 20
10.255.255.255 255.255.255.255 10.97.10.28 10.97.10.28 20
92.50.178.5 255.255.255.255 10.97.10.1 10.97.10.28 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
224.0.0.0 240.0.0.0 10.97.10.28 10.97.10.28 20
255.255.255.255 255.255.255.255 10.97.10.28 10.97.10.28 1
Основной шлюз: 10.97.10.1
===========================================================================
Постоянные маршруты:
Отсутствует


а вот под линуксом ну совсем другая таблица роутинга вырисовывается после получения по дшсп с тефолтными растройками :(



serenity:/etc/network# dhcpcd eth0
dhcpcd.sh: interface eth0 has been configured with new IP=10.97.10.19
serenity:/etc/network# ifconfig
eth0 Link encap:Ethernet HWaddr 00:14:85:27:97:00
inet addr:10.97.10.19 Bcast:10.97.10.63 Mask:255.255.255.192
inet6 addr: fe80::214:85ff:fe27:9700/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:233 errors:0 dropped:0 overruns:0 frame:0
TX packets:186 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21575 (21.0 KiB) TX bytes:19248 (18.7 KiB)
Interrupt:20 Base address:0xa000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1146 errors:0 dropped:0 overruns:0 frame:0
TX packets:1146 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:69221 (67.5 KiB) TX bytes:69221 (67.5 KiB)

serenity:/etc/netwo
serenity:/var/log# ping 10.97.10.1
PING 10.97.10.1 (10.97.10.1) 56(84) bytes of data.
64 bytes from 10.97.10.1: icmp_seq=1 ttl=255 time=2.86 ms
64 bytes from 10.97.10.1: icmp_seq=2 ttl=255 time=0.774 ms
64 bytes from 10.97.10.1: icmp_seq=3 ttl=255 time=0.935 ms
64 bytes from 10.97.10.1: icmp_seq=4 ttl=255 time=0.824 ms
^C
--- 10.97.10.1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3005ms
rtt min/avg/max/mdev = 0.774/1.350/2.868/0.878 ms
serenity:/var/log# ping 92.50.178.5
PING 92.50.178.5 (92.50.178.5) 56(84) bytes of data.
From 10.97.10.19 icmp_seq=1 Destination Host Unreachable
From 10.97.10.19 icmp_seq=2 Destination Host Unreachable
From 10.97.10.19 icmp_seq=3 Destination Host Unreachable
From 10.97.10.19 icmp_seq=5 Destination Host Unreachable
From 10.97.10.19 icmp_seq=6 Destination Host Unreachable
From 10.97.10.19 icmp_seq=7 Destination Host Unreachable
^C
--- 92.50.178.5 ping statistics ---
8 packets transmitted, 0 received, +6 errors, 100% packet loss, time 7022ms
, pipe 3
serenity:/var/log# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
92.50.178.5 0.0.0.0 255.255.255.255 UH 0 0 0 eth0
10.97.10.0 0.0.0.0 255.255.255.192 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 10.97.10.1 0.0.0.0 UG 0 0 0 eth0
serenity:/var/log#





Aug 11 20:49:40 serenity dhcpcd[3485]: eth0: dhcpcd 3.2.3 starting
Aug 11 20:49:40 serenity dhcpcd[3485]: eth0: hardware address = 00:14:85:27:97:00
Aug 11 20:49:40 serenity dhcpcd[3485]: eth0: DUID = 00:01:00:01:10:e9:6b:f9:00:14:85:27:97:00
Aug 11 20:49:40 serenity dhcpcd[3485]: eth0: broadcasting for a lease
Aug 11 20:49:40 serenity dhcpcd[3485]: eth0: offered 10.97.10.19 from 10.97.10.1
Aug 11 20:49:40 serenity dhcpcd[3485]: eth0: checking 10.97.10.19 is available on attached networks
Aug 11 20:49:41 serenity dhcpcd[3485]: eth0: leased 10.97.10.19 for 3600 seconds
Aug 11 20:49:41 serenity dhcpcd[3485]: eth0: adding IP address 10.97.10.19/26
Aug 11 20:49:41 serenity dhcpcd[3485]: eth0: adding route to 92.50.178.5/32 via 10.97.10.1 metric 0
Aug 11 20:49:41 serenity dhcpcd[3485]: eth0: adding default route via 10.97.10.1 metric 0
Aug 11 20:49:41 serenity dhcpcd[3485]: eth0: adding route to 169.254.0.0/16 metric 0
Aug 11 20:49:41 serenity dhcpcd.sh: interface eth0 has been configured with new IP=10.97.10.19
Aug 11 20:49:41 serenity dhcpcd[3485]: eth0: exiting


в логах никакого криминала вроде - но один хрен не работает :(

stas_on
()

после апдейта debian нет ppptp

Форум — Desktop

Здравствуйте!

есть проблема интернет от уфанета рррtp после очередного обновления - сеть отвалилась не поднимается ррр интерфейс даже с выключенным фаерволом :(

в логах LCP: timeout sending Config-Requests постоянно значится...

вот кусок мессадж лога: Jul 16 18:47:37 serenity pppd[2257]: PPP session is 49243 Jul 16 18:47:37 serenity pppd[2257]: Using interface ppp0 Jul 16 18:47:37 serenity pppd[2257]: Connect: ppp0 <--> eth0 Jul 16 18:47:37 serenity pppd[2257]: Warning - secret file /etc/ppp/pap-secrets has world and/or group access Jul 16 18:48:10 serenity pppd[2257]: LCP: timeout sending Config-Requests Jul 16 18:48:10 serenity pppd[2257]: Connection terminated. Jul 16 18:48:10 serenity pppd[2257]: Modem hangup Jul 16 18:48:22 serenity pppd[4010]: Plugin rp-pppoe.so loaded. Jul 16 18:48:22 serenity pppd[4011]: pppd 2.4.4 started by root, uid 0 Jul 16 18:48:22 serenity pppd[4011]: PPP session is 27148 Jul 16 18:48:22 serenity pppd[4011]: Using interface ppp0 Jul 16 18:48:22 serenity pppd[4011]: Connect: ppp0 <--> eth0 Jul 16 18:48:22 serenity pppd[4011]: Warning - secret file /etc/ppp/pap-secrets has world and/or group access Jul 16 18:48:40 serenity pppd[2257]: PPP session is 27151 Jul 16 18:48:40 serenity pppd[2257]: Using interface ppp1 Jul 16 18:48:40 serenity pppd[2257]: Connect: ppp1 <--> eth0 Jul 16 18:48:40 serenity pppd[2257]: Warning - secret file /etc/ppp/pap-secrets has world and/or group access Jul 16 18:48:55 serenity pppd[4011]: LCP: timeout sending Config-Requests Jul 16 18:48:55 serenity pppd[4011]: Connection terminated. Jul 16 18:48:56 serenity pppd[4011]: Modem hangup Jul 16 18:49:13 serenity pppd[2257]: LCP: timeout sending Config-Requests Jul 16 18:49:13 serenity pppd[2257]: Connection terminated. Jul 16 18:49:13 serenity pppd[2257]: Modem hangup Jul 16 18:49:26 serenity pppd[4011]: PPP session is 27155 Jul 16 18:49:26 serenity pppd[4011]: Using interface ppp0 Jul 16 18:49:26 serenity pppd[4011]: Connect: ppp0 <--> eth0 Jul 16 18:49:26 serenity pppd[4011]: Warning - secret file /etc/ppp/pap-secrets has world and/or group access Jul 16 18:49:43 serenity pppd[2257]: PPP session is 27158 Jul 16 18:49:43 serenity pppd[2257]: Using interface ppp1 Jul 16 18:49:43 serenity pppd[2257]: Connect: ppp1 <--> eth0 Jul 16 18:49:43 serenity pppd[2257]: Warning - secret file /etc/ppp/pap-secrets has world and/or group access Jul 16 18:49:59 serenity pppd[4011]: LCP: timeout sending Config-Requests Jul 16 18:49:59 serenity pppd[4011]: Connection terminated. Jul 16 18:49:59 serenity pppd[4011]: Modem hangup Jul 16 18:50:16 serenity pppd[2257]: LCP: timeout sending Config-Requests

stas_on
()

не запуск иксовых преложений

Форум — Desktop

Привет!

Есть маленькая проблема: некоторые приложения (conky' fglrxinfo' fglrx_gears' и тому подобные) не могут запускаться из консоли - пишут, что экран не найден и они не могут запуститься на экране 0:0

а если теже приложения запускать из кдешного меню ЗАПУСТИТЬ или вообще из менюшек- то они запускаются

дебиан

АТИ

дрова - radeon

тестинг

stas_on
()

RSS подписка на новые темы