LINUX.ORG.RU

Принудительная очистка CD-RW


0

0

Короче, от win-перца достался CDRW-дискю Диск вообще не царапанный, новый. До инцидента с вынью, перезаписывался у меня нормально.
TDK 12x, 10x, 8x, 4x.
В винде он умудрился что-то записать на него, что теперь его нулевой сектор не может понять ни один cd-rom.
То есть, лампочка резака постоянно горит и не гаснет, когда вставляешь его в носитель. Не может что-то прочесть на нем, но и прогам для записи не дает, тем самым, его перезатереть.

cdrecord dev=/dev/cdrom -blank=all -force speed=4
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 JЖrg Schilling
cdrecord: Warning: Running on Linux-2.6.11.8
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/cdrom'
devname: '/dev/cdrom'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'AOPEN '
Identifikation : '8X8 DVD Dual AAN'
Revision : '1.5A'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
cdrecord: Success. read disk info: scsi sendcmd: no error
CDB: 51 00 00 00 00 00 00 00 04 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid) operation 0% done
resid: 4
cmd finished after 0.000s timeout 240s
cdrecord: Cannot get disk type.
cdrecord: Success. set cd speed: scsi sendcmd: no error
CDB: BB 00 16 0D 02 C4 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid) operation 0% done
cmd finished after 0.000s timeout 40s
cdrecord: Cannot set speed/dummy.
Waiting for drive to calm down.
Starting to write CD/DVD at speed 4 in real force BLANK mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
cdrecord: Success. blank unit: scsi sendcmd: no error
CDB: A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid) operation 0% done
cmd finished after 0.000s timeout 9600s
Starting to write CD/DVD at speed 4 in real force BLANK mode for single session.
No chance to quit anymore. Operation starts.
cdrecord: OPC failed.
cdrecord: Success. blank unit: scsi sendcmd: no error
CDB: A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid) operation 0% done
cmd finished after 0.000s timeout 9600s
cdrecord: Cannot blank disk, aborting.

★★★

Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.