машина под slackware используется как роутер eth0 - наружу, eth1,2,3 - внутренние подсети. провайдер вводит pppoe. поднял rp-pppoe, запускаю adsl-start. пишет connected. но весь траффик идет все равно по старому каналу. пишу /usr/sbin/iptables -t nat -A POSTROUTING -s 192.168.1.0/255.255.255.0 -d 0.0.0.0/0.0.0.0 -j MASQUERADE -o ppp0. ничего не меняется все равно идет по старому. чего делать?
на route выдает.
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 192.168.10.1 0.0.0.0 UG 1 0 0 eth0 root@server:/usr/sbin# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 * 255.255.255.255 UH 0 0 0 ppp0 192.168.3.0 * 255.255.255.0 U 0 0 0 eth3 192.168.2.0 * 255.255.255.0 U 0 0 0 eth2 192.168.1.0 * 255.255.255.0 U 0 0 0 eth1 localnet * 255.255.255.0 U 0 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default 192.168.10.1 0.0.0.0 UG 1 0 0 eth0 root@server:/usr/sbin# route add default gw ppp0 ppp0: Unknown host root@server:/usr/sbin# route add default gw ppp0 ppp0: Unknown host root@server:/usr/sbin# route add default gw eth0 eth0: Unknown host root@server:/usr/sbin# route add default gw 192.168.10.1 root@server:/usr/sbin# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 * 255.255.255.255 UH 0 0 0 ppp0 192.168.3.0 * 255.255.255.0 U 0 0 0 eth3 192.168.2.0 * 255.255.255.0 U 0 0 0 eth2 192.168.1.0 * 255.255.255.0 U 0 0 0 eth1 localnet * 255.255.255.0 U 0 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default 192.168.10.1 0.0.0.0 UG 0 0 0 eth0 default 192.168.10.1 0.0.0.0 UG 1 0 0 eth0 root@server:/usr/sbin# route add Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M] [netmask N] [mss Mss] [window W] [irtt I] [mod] [dyn] [reinstate] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject inet_route [-FC] flush NOT supported root@server:/usr/sbin# route add default gw dev ppp0 dev: Unknown host root@server:/usr/sbin# route add dev ppp0 dev: Unknown host root@server:/usr/sbin# route add root@server:/usr/sbin# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 * 255.255.255.255 UH 0 0 0 ppp0 192.168.3.0 * 255.255.255.0 U 0 0 0 eth3 192.168.2.0 * 255.255.255.0 U 0 0 0 eth2 192.168.1.0 * 255.255.255.0 U 0 0 0 eth1 localnet * 255.255.255.0 U 0 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default 192.168.10.1 0.0.0.0 UG 0 0 0 eth0 default 192.168.10.1 0.0.0.0 UG 1 0 0 eth0
не понятна первая строчка!!!!