Добрый!
Имею проблему с IPv6, никак не получается настроить чтобы использовать их в VM.
У меня имеется: 2001:41d0:240:8f00::/56
Вопрос, как сконфигурировать бридж(vmbr0), чтобы я мог подать дальше IPv6 и использовать их уже в VM? Мозгов не хватает, для меня IPv6 в новинкую
Вот так сейчас выглядит настройка моей сети (ссылался на: https://support.us.ovhcloud.com/hc/en-us/articles/4408052730387-How-to-Configure-the-Network-on-Proxmox-VE-with-SCALE-and-HG-Servers). IPv4 субнет работает, всё гуд.
auto lo
iface lo inet loopback
# Enable IP forwarding
up echo "1" > /proc/sys/net/ipv4/ip_forward
# Enable proxy-arp only for public bond
up echo "1" > /proc/sys/net/ipv4/conf/bond0/proxy_arp
# public interface 1
auto enp59s0f0np0
iface enp59s0f0np0 inet manual
bond-master bond0
# public interface 2
auto ens35f1np1
iface ens35f1np1 inet manual
bond-master bond0
# private interface 1
auto ens43f0np0
iface ens43f0np0 inet manual
# private interface 2
auto ens43f1np1
iface ens43f1np1 inet manual
# LACP aggregate on public interfaces
# configured in static mode on this example
# Has the server's public IP
auto bond0
iface bond0 inet static
address 141.95.XXX.XXX/32
gateway XXX.64.0.X
bond-slaves enp59s0f0np0 ens35f1np1
bond-mode 4
bond-miimon 100
bond-downdelay 200
bond-updelay 200
bond-lacp-rate 1
bond-xmit-hash-policy layer3+4
# Use the mac address of the first public interface
hwaddress b8:ce:f6:XX:XX:XX
#Private
auto bond1
iface bond1 inet static
bond-slaves ens43f0np0 ens43f1np1
bond-mode 4
bond-miimon 100
bond-downdelay 200
bond-updelay 200
bond-lacp-rate 1
bond-xmit-hash-policy layer3+4
# Use the mac address of the first private interface
hwaddress b8:ce:f6:XX:XX:XX
# Configure the bridge with a private address and add route(s) to send the Additional IPs to it
# A.B.C.D/X => Subnet of Additional IPs assigned to the server, this can be a host with /32
# By default Proxmox creates vmbr0.
# You can use it or create another one
auto vmbr0
iface vmbr0 inet dhcp
# Define a private IP, it should not overlap your existing private networks on the vrack for example
address 192.168.0.1/24
bridge-ports none
bridge-stp off
bridge-fd 0
# Add block IP
up ip route add 92.XXX.XXX.XXX/28 dev vmbr0
# Bridge used for private networks on vRack
# The VLAN feature is enabled
auto vmbr1
iface vmbr1 inet manual
bridge-ports bond1
bridge-stp off
bridge-fd 0
bridge-vlan-aware yes
bridge-vids 2-4094
