Я думаю от версии это конечно не завист Smiley Стоит Ubuntu 6.10 Server НА машине две сетевый, одна смотрит в Инет, другая в локалку. Требуется получать доступ из внешней сети в локалку. т.е. нужен VPN сервер. Поставил pptpd, вроде все настроил: конфиги:
less /etc/pptpd.conf
###############################################################################
# $Id: pptpd.conf 4255 2004-10-03 18:44:00Z rene $
#
# Sample Poptop configuration file /etc/pptpd.conf
#
# Changes are effective when pptpd is restarted.
###############################################################################
# TAG: ppp
# Path to the pppd program, default '/usr/sbin/pppd' on Linux
#
#ppp /usr/sbin/pppd
# TAG: option
# Specifies the location of the PPP options file.
# By default PPP looks in '/etc/ppp/options'
#
option /etc/ppp/pptpd-options
# TAG: debug
# Turns on (more) debugging to syslog
#
debug
# TAG: stimeout
# Specifies timeout (in seconds) on starting ctrl connection
#
# stimeout 10
# TAG: noipparam
# Suppress the passing of the client's IP address to PPP, which is
# done by default otherwise.
#
#noipparam
# TAG: logwtmp
# Use wtmp(5) to record client connections and disconnections.
#
#logwtmp
# TAG: bcrelay <if>
# Turns on broadcast relay to clients from interface <if>
#
#bcrelay eth1
# TAG: localip
# TAG: remoteip
# Specifies the local and remote IP address ranges.
#
# Any addresses work as long as the local machine takes care of the
# routing. But if you want to use MS-Windows networking, you should
# use IP addresses out of the LAN address space and use the proxyarp
# option in the pppd options file, or run bcrelay.
#
# You can specify single IP addresses seperated by commas or you can
# specify ranges, or both. For example:
#
#
# 192.168.0.234,192.168.0.245-249,192.168.0.254
#
# IMPORTANT RESTRICTIONS:
#
# 1. No spaces are permitted between commas or within addresses.
#
# 2. If you give more IP addresses than MAX_CONNECTIONS, it will
# start at the beginning of the list and go until it gets
# MAX_CONNECTIONS IPs. Others will be ignored.
#
# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
# you must type 234-238 if you mean this.
#
# 4. If you give a single localIP, that's ok - all local IPs will
# be set to the given one. You MUST still give at least one remote
# IP for each simultaneous client.
#
# (Recommended)
localip 192.168.1.1
#remoteip 192.168.1.2 # or #localip 192.168.0.234-238,192.168.0.245 #remoteip 192.168.1.234-238,192.168.1.245 ________________________________________________________________________________ ___________________
less /etc/ppp/pptpd-options
############################################################################### # $Id: pptpd-options 4255 2004-10-03 18:44:00Z rene $ # # Sample Poptop PPP options file /etc/ppp/pptpd-options # Options used by PPP when a connection arrives from a client. # This file is pointed to by /etc/pptpd.conf option keyword. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 and the kernel MPPE module. ###############################################################################
# Authentication
# Name of the local system for authentication purposes # (must match the second field in /etc/ppp/chap-secrets entries) name pptpd
# Optional: domain name to use for authentication # domain mydomain.net
# Strip the domain prefix from the username before authentication. # (applies if you use pppd with chapms-strip-domain patch) #chapms-strip-domain
# Encryption # Debian: on systems with a kernel built with the package # kernel-patch-mppe >= 2.4.2 and using ppp >= 2.4.2, ... # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}}
# Network and Routingless /etc/ppp/chap-secrets
# If pppd is acting as a server for Microsoft Windows clients, this # option allows pppd to supply one or two DNS (Domain Name Server) # addresses to the clients. The first instance of this option # specifies the primary DNS address; the second instance (if given) # specifies the secondary DNS address. #ms-dns 10.0.0.1 #ms-dns 10.0.0.2
# If pppd is acting as a server for Microsoft Windows or "Samba" # clients, this option allows pppd to supply one or two WINS (Windows # Internet Name Services) server addresses to the clients. The first # instance of this option specifies the primary WINS address; the # second instance (if given) specifies the secondary WINS address. #ms-wins 10.0.0.3 #ms-wins 10.0.0.4
# Add an entry to this system's ARP [Address Resolution Protocol] # table with the IP address of the peer and the Ethernet address of this # system. This will have the effect of making the peer appear to other # systems to be on the local ethernet. # (you do not need this if your PPTP server is responsible for routing # packets to the clients -- James Cameron) #proxyarp
# Debian: do not replace the default route nodefaultroute
# Logging
# Enable connection debugging facilities. # (see your syslog configuration for where pppd sends to) debug
# Print out all the option values which have been set. # (often requested by mailing list to verify options) #dump # Miscellaneous
# Create a UUCP-style lock file for the pseudo-tty to ensure exclusive # access. lock
# Disable BSD-Compress compression nobsdcomp
и прописал логин и пароль в less /etc/ppp/chap-secrets внутренняя сетка 192.168.1.0/24
Так вот, из внешней сети подключаюсь, выдается IP, вроде как все ОК. Могу пингать удаленный конец, сетевух которая смотрить в локалку, а вот саму локалку не вижу Sad
В чем проблема не могу понять Подскажить кто как делал. на фаерволе все открыто может что-то надо в фаерволе прописать, чтобы он пакеты перекидывал и ppp0 на локальную сетевуху. Заранее спасибо.
