Distributor ID: Debian
Description:    Debian GNU/Linux 5.0.5 (lenny)
Release:        5.0.5
Codename:       lenny

###############################################################################
# $Id: pptpd.conf 4255 2004-10-03 18:44:00Z rene $
#
# Sample Poptop configuration file /etc/pptpd.conf
#
# Changes are effective when pptpd is restarted.
###############################################################################

# TAG: ppp
#       Path to the pppd program, default '/usr/sbin/pppd' on Linux
#
#ppp /usr/sbin/pppd

# TAG: option
#       Specifies the location of the PPP options file.
#       By default PPP looks in '/etc/ppp/options'
#
option /etc/ppp/pptpd-options

# TAG: debug
#       Turns on (more) debugging to syslog
#
#debug

# TAG: stimeout
#       Specifies timeout (in seconds) on starting ctrl connection
#
# stimeout 10

# TAG: noipparam
#       Suppress the passing of the client's IP address to PPP, which is
#       done by default otherwise.
#
#noipparam

# TAG: logwtmp
#       Use wtmp(5) to record client connections and disconnections.
#
logwtmp

# TAG: bcrelay <if>
#       Turns on broadcast relay to clients from interface <if>
#
#bcrelay eth1

# TAG: localip
# TAG: remoteip
#       Specifies the local and remote IP address ranges.
#
#       Any addresses work as long as the local machine takes care of the
#       routing.  But if you want to use MS-Windows networking, you should
#       use IP addresses out of the LAN address space and use the proxyarp
#       option in the pppd options file, or run bcrelay.
#
#       You can specify single IP addresses seperated by commas or you can
#       specify ranges, or both. For example:
#
#               192.168.0.234,192.168.0.245-249,192.168.0.254
#
#       IMPORTANT RESTRICTIONS:
#
#       1. No spaces are permitted between commas or within addresses.
#
#       2. If you give more IP addresses than MAX_CONNECTIONS, it will
#          start at the beginning of the list and go until it gets
#          MAX_CONNECTIONS IPs. Others will be ignored.
#
#       3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
#          you must type 234-238 if you mean this.
#
#       4. If you give a single localIP, that's ok - all local IPs will
#          be set to the given one. You MUST still give at least one remote
#          IP for each simultaneous client.
#
# (Recommended)
#localip 192.168.0.1
#remoteip 192.168.0.234-238,192.168.0.245
# or
#localip 192.168.0.234-238,192.168.0.245
#remoteip 192.168.1.234-238,192.168.1.245

###############################################################################
# $Id: pptpd-options 4643 2006-11-06 18:42:43Z rene $
#
# Sample Poptop PPP options file /etc/ppp/pptpd-options
# Options used by PPP when a connection arrives from a client.
# This file is pointed to by /etc/pptpd.conf option keyword.
# Changes are effective on the next connection.  See "man pppd".
#
# You are expected to change this file to suit your system.  As
# packaged, it requires PPP 2.4.2 and the kernel MPPE module.
###############################################################################


# Authentication

# Name of the local system for authentication purposes
# (must match the second field in /etc/ppp/chap-secrets entries)
name pptpd

# Optional: domain name to use for authentication
# domain mydomain.net

# Strip the domain prefix from the username before authentication.
# (applies if you use pppd with chapms-strip-domain patch)
#chapms-strip-domain


# Encryption
# Debian: on systems with a kernel built with the package
# kernel-patch-mppe >= 2.4.2 and using ppp >= 2.4.2, ...
# {{{
refuse-pap
refuse-chap
refuse-mschap
# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
# Challenge Handshake Authentication Protocol, Version 2] authentication.
require-mschap-v2
# Require MPPE 128-bit encryption
# (note that MPPE requires the use of MSCHAP-V2 during authentication)
# require-mppe-128
# }}}




# Network and Routing

# If pppd is acting as a server for Microsoft Windows clients, this
# option allows pppd to supply one or two DNS (Domain Name Server)
# addresses to the clients.  The first instance of this option
# specifies the primary DNS address; the second instance (if given)
# specifies the secondary DNS address.
# Attention! This information may not be taken into account by a Windows
# client. See KB311218 in Microsoft's knowledge base for more information.
#ms-dns 10.0.0.1
#ms-dns 10.0.0.2

# If pppd is acting as a server for Microsoft Windows or "Samba"
# clients, this option allows pppd to supply one or two WINS (Windows
# Internet Name Services) server addresses to the clients.  The first
# instance of this option specifies the primary WINS address; the
# second instance (if given) specifies the secondary WINS address.
#ms-wins 10.0.0.3
#ms-wins 10.0.0.4

# Add an entry to this system's ARP [Address Resolution Protocol]
# table with the IP address of the peer and the Ethernet address of this
# system.  This will have the effect of making the peer appear to other
# systems to be on the local ethernet.
# (you do not need this if your PPTP server is responsible for routing
# packets to the clients -- James Cameron)
proxyarp

# Debian: do not replace the default route
nodefaultroute


# Logging

# Enable connection debugging facilities.
# (see your syslog configuration for where pppd sends to)
debug

# Print out all the option values which have been set.
# (often requested by mailing list to verify options)
dump


# Miscellaneous

# Create a UUCP-style lock file for the pseudo-tty to ensure exclusive
# access.
lock

# Disable BSD-Compress compression
nobsdcomp

name pptpd
refuse-pap
refuse-chap
refuse-mschap
require-mschap-v2
require-mppe-128
noproxyarp
nodefaultroute
lock
nobsdcomp 
novj
novjccomp
nologfd
auth

option /etc/ppp/pptpd-options
logwtmp
localip 172.16.0.1
remoteip 172.16.0.2-254