>wifi карта алфа awus036h
лучше выхлоп lsusb

сначала к логопеду, потом - на ЛОР.

> где можно на руском штото полезное наити

Советую сначала включить спелчекер и осилить знаки препинания.

wifi

а по подробнее можно ?

http://tinyurl.com/2euu94u

>пожалсто

оперицонки

медлено

што

драивера

правилно

штото

наити

руском

кто подскажет где можно на руском штото полезное наити

[ирония]Вам точно нужно на русском? Может проще на брейнфаке или на языке малых народностей стреднерусской равнины: чудей, угрей, удмуртов, кавказцев, чантов, мансей?[/ирония]
По сабжу: возможно вайфай переключается на более медленный режим. Поищите что-нибудь связанное с ним в dmesg(команда) или //var/log/syslog* и выложите сюда.

Кстати, тут есть специалисты по всему. Если нужно помочь с набором на ПК, не стесняйтесь,всякое бывает, поможем.

wifi

janis@janis-laptop:~$ sudo lsusb
Bus 008 Device 002: ID 0a5c:2151 Broadcom Corp.
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 002 Device 002: ID 1005:b113 Apacer Technology, Inc. Handy Steno 2.0/HT203
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 064e:a103 Suyin Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
janis@janis-laptop:~$

>Bus 002 Device 004: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
ну вот - теперь хоть понятно о чём речь :)

wifi

[ 37.372790] wlan1: direct probe to AP 00:16:0a:11:27:50 (try 1)
[ 37.376529] wlan1: direct probe responded
[ 37.376534] wlan1: authenticate with AP 00:16:0a:11:27:50 (try 1)
[ 37.379520] wlan1: authenticated
[ 37.379558] wlan1: associate with AP 00:16:0a:11:27:50 (try 1)
[ 37.386154] wlan1: RX AssocResp from 00:16:0a:11:27:50 (capab=0x401 status=0 aid=1)
[ 37.386159] wlan1: associated
[ 37.387740] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 48.100045] wlan1: no IPv6 routers present
[ 66.725073] wlan1: deauthenticating from 00:16:0a:11:27:50 by local choice (reason=3)
[ 67.028407] wlan1: deauthenticating from 00:27:19:e6:ee:c0 by local choice (reason=3)
[ 67.345410] wlan1: direct probe to AP 00:27:19:e6:ee:c0 (try 1)
[ 67.347654] wlan1: direct probe responded
[ 67.347659] wlan1: authenticate with AP 00:27:19:e6:ee:c0 (try 1)
[ 67.349414] wlan1: authenticated
[ 67.349440] wlan1: associate with AP 00:27:19:e6:ee:c0 (try 1)
[ 67.351784] wlan1: RX AssocResp from 00:27:19:e6:ee:c0 (capab=0x431 status=0 aid=1)
[ 67.351788] wlan1: associated

wifi

[ 16.714948] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input8
[ 16.794363] phy1: Selected rate control algorithm 'minstrel'
[ 16.795043] phy1: hwaddr 00:c0:ca:3e:8d:00, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 16.810895] rtl8187: Customer ID is 0xFF
[ 16.810936] Registered led device: rtl8187-phy1::tx
[ 16.810952] Registered led device: rtl8187-phy1::rx
[ 16.812260] rtl8187: wireless switch is on
[ 16.812294] usbcore: registered new interface driver rtl8187
[ 16.821467] udev: renamed network interface wlan0 to wlan1
[ 16.821699] ath: EEPROM regdomain: 0x65
[ 16.821701] ath: EEPROM indicates we should expect a direct regpair map