DRWeb

ftp://ftp.drweb.ru/pub/unix/

Спасибо.

А тогда такой вопрос: при загрузке системы демон стартует, но выдается сообщение : could not get dependency info for "drwebd"! Please run:
#/sbin/depscan.sh
to fix it!
Но демон запускается.
Далее:
ERROR: "drwebd" does not have a start function.
Ну это она на инит скрипт ругается. 
Пытаюсь проверить с помошью eicar.com:
drwebdc -w -n127.0.0.1 -p3000 -f eicar.com
Выдает:
dwlib: set timeout for each scanning session with inet:3000@127.0.0.1 to 0 milliseconds
dwlib: dont match to pid: prefix for pidfile addressing
dwlib: ipc: parse address string <inet:3000@127.0.0.1>
dwlib: ipc: address inet:3000@127.0.0.1 added
dwlib: address inet:3000@127.0.0.1 added to list
dwlib: tcp: socket 3 has been created
dwlib: tcp: connecting to 127.0.0.1:3000 ...
dwlib: tcp: connecting to 127.0.0.1:3000 - done
dwlib: ipc: sent 4 bytes (need 4 bytes) - errorcode[0]
dwlib: fd: recv(4) called
dwlib: fd: recv(4), readed=4
dwlib: ipc: recv 4 bytes (need 4 bytes) - errorcode[0]
dwlib: tcp: socket 3 will been closed
Scan -> Options: 0 Filename[27]: /opt/drweb/doc/eicar.com
dwlib: tcp: socket 3 has been created
dwlib: tcp: connecting to 127.0.0.1:3000 ...
dwlib: tcp: connecting to 127.0.0.1:3000 - done
dwlib: ipc: sent 4 bytes (need 4 bytes) - errorcode[0]
dwlib: ipc: sent 4 bytes (need 4 bytes) - errorcode[0]
dwlib: ipc: sent 4 bytes (need 4 bytes) - errorcode[0]
dwlib: ipc: sent 27 bytes (need 27 bytes) - errorcode[0]
dwlib: ipc: sent 4 bytes (need 4 bytes) - errorcode[0]
dwlib: ipc: sent 3566 bytes (need 3566 bytes) - errorcode[0]
dwlib: fd: recv(4) called
dwlib: fd: recv(4), readed=4
dwlib: ipc: recv 4 bytes (need 4 bytes) - errorcode[0]
dwlib: tcp: socket 3 will been closed
Results: daemon return code 0x110000 (after scanning/curing composite object is clean)
Finally program exitcode=0x20.


Что ему надо?