Gentoo+IPtables v.1.2.9

Настраиваю iptables. Скрипт взял с www.gentoo.org
Не работает.
Не запускается ./firewall start - выдает ошибку.
Где ошибка? Почему не стартует? Как запустить, чтобы писала на какой
строчке вылетает?

#!/sbin/runscript
IPTABLES=/sbin/iptables
IPTABLESSAVE=/sbin/iptables-save
IPTABLESRESTORE=/sbin/iptables-restore
FIREWALL=/etc/firewall.rules
DNS1=195.170.42.156
#inside
IIP=192.168.0.190
IINTERFACE=eth0
LOCAL_NETWORK=192.168.0.0/24
#outside
OIP=217.107.6.151
OINTERFACE=eth1

opts="${opts} showstatus panic save restore showoptions rules"

depend() {
need net procparam
}

rules() {
stop
ebegin "Setting internal rules"

einfo "Setting default rule to drop"
$IPTABLES -P FORWARD DROP
$IPTABLES -P INPUT DROP
$IPTABLES -P OUTPUT DROP

#default rule
einfo "Creating states chain"
$IPTABLES -N allowed-connection
$IPTABLES -F allowed-connection
$IPTABLES -A allowed-connection -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A allowed-connection -i $IINTERFACE -m limit -j LOG --log-prefix \
"Bad packet from ${IINTERFACE}:"
$IPTABLES -A allowed-connection -j DROP

#ICMP traffic
einfo "Creating icmp chain"
$IPTABLES -N icmp_allowed
$IPTABLES -F icmp_allowed
$IPTABLES -A icmp_allowed -m state --state NEW -p icmp --icmp-type \
time-exceeded -j ACCEPT
$IPTABLES -A icmp_allowed -m state --state NEW -p icmp --icmp-type \
destination-unreachable -j ACCEPT
$IPTABLES -A icmp_allowed -p icmp -j LOG --log-prefix "Bad ICMP traffic:"
$IPTABLES -A icmp_allowed -p icmp -j DROP

#Incoming traffic
einfo "Creating incoming ssh traffic chain"
$IPTABLES -N allow-ssh-traffic-in
$IPTABLES -F allow-ssh-traffic-in
#Flood protection
$IPTABLES -A allow-ssh-traffic-in -m limit --limit 1/second -p tcp --tcp-flags \
ALL RST --dport ssh -j ACCEPT
$IPTABLES -A allow-ssh-traffic-in -m limit --limit 1/second -p tcp --tcp-flags \
ALL FIN --dport ssh -j ACCEPT
$IPTABLES -A allow-ssh-traffic-in -m limit --limit 1/second -p tcp --tcp-flags \
ALL SYN --dport ssh -j ACCEPT
$IPTABLES -A allow-ssh-traffic-in -m state --state RELATED,ESTABLISHED -p tcp --dport ssh -j ACCEPT

#outgoing traffic
einfo "Creating outgoing ssh traffic chain"
$IPTABLES -N allow-ssh-traffic-out
$IPTABLES -F allow-ssh-traffic-out
$IPTABLES -A allow-ssh-traffic-out -p tcp --dport ssh -j ACCEPT

einfo "Creating outgoing dns traffic chain"
$IPTABLES -N allow-dns-traffic-out
$IPTABLES -F allow-dns-traffic-out
$IPTABLES -A allow-dns-traffic-out -p udp -d $DNS1 --dport domain \
-j ACCEPT
$IPTABLES -A allow-dns-traffic-out -p udp -d $DNS2 --dport domain \
-j ACCEPT

einfo "Creating outgoing http/https traffic chain"
$IPTABLES -N allow-www-traffic-out
$IPTABLES -F allow-www-traffic-out
$IPTABLES -A allow-www-traffic-out -p tcp --dport www -j ACCEPT
$IPTABLES -A allow-www-traffic-out -p tcp --dport https -j ACCEPT

#Catch portscanners
einfo "Creating portscan detection chain"
$IPTABLES -N check-flags
$IPTABLES -F check-flags
$IPTABLES -A check-flags -p tcp --tcp-flags ALL FIN,URG,PSH -m limit \
--limit 5/minute -j LOG --log-level alert --log-prefix "NMAP-XMAS:"
$IPTABLES -A check-flags -p tcp --tcp-flags ALL FIN,URG,PSH -j DROP
$IPTABLES -A check-flags -p tcp --tcp-flags ALL ALL -m limit --limit \
5/minute -j LOG --log-level 1 --log-prefix "XMAS:"
$IPTABLES -A check-flags -p tcp --tcp-flags ALL ALL -j DROP
$IPTABLES -A check-flags -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG \
-m limit --limit 5/minute -j LOG --log-level 1 --log-prefix "XMAS-PSH:"
$IPTABLES -A check-flags -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG -j DROP
$IPTABLES -A check-flags -p tcp --tcp-flags ALL NONE -m limit \
--limit 5/minute -j LOG --log-level 1 --log-prefix "NULL_SCAN:"
$IPTABLES -A check-flags -p tcp --tcp-flags ALL NONE -j DROP
$IPTABLES -A check-flags -p tcp --tcp-flags SYN,RST SYN,RST -m limit \
--limit 5/minute -j LOG --log-level 5 --log-prefix "SYN/RST:"
$IPTABLES -A check-flags -p tcp --tcp-flags SYN,RST SYN,RST -j DROP
$IPTABLES -A check-flags -p tcp --tcp-flags SYN,FIN SYN,FIN -m limit \
--limit 5/minute -j LOG --log-level 5 --log-prefix "SYN/FIN:"
$IPTABLES -A check-flags -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP

# Apply and add invalid states to the chains
einfo "Applying chains to INPUT"
$IPTABLES -A INPUT -m state --state INVALID -j DROP
$IPTABLES -A INPUT -j icmp_allowed
$IPTABLES -A INPUT -j check-flags
$IPTABLES -A INPUT -i lo -j ACCEPT
$IPTABLES -A INPUT -j allow-ssh-traffic-in
$IPTABLES -A INPUT -j allowed-connection

einfo "Applying chains to FORWARD"
$IPTABLES -A FORWARD -m state --state INVALID -j DROP
$IPTABLES -A FORWARD -j icmp_allowed
$IPTABLES -A FORWARD -j check-flags
$IPTABLES -A FORWARD -o lo -j ACCEPT
$IPTABLES -A FORWARD -j allow-ssh-traffic-in
$IPTABLES -A FORWARD -j allow-www-traffic-out
$IPTABLES -A FORWARD -j allowed-connection

einfo "Applying chains to OUTPUT"
$IPTABLES -A OUTPUT -m state --state INVALID -j DROP
$IPTABLES -A OUTPUT -j icmp_allowed
$IPTABLES -A OUTPUT -j check-flags
$IPTABLES -A OUTPUT -o lo -j ACCEPT
$IPTABLES -A OUTPUT -j allow-ssh-traffic-out
$IPTABLES -A OUTPUT -j allow-dns-traffic-out
$IPTABLES -A OUTPUT -j allow-www-traffic-out
$IPTABLES -A OUTPUT -j allowed-connection

#Allow client to route through via NAT (Network Address Translation)
$IPTABLES -t nat -A POSTROUTING -o $IINTERFACE -j MASQUERADE
eend $?
}

start() {
ebegin "Starting firewall"
if [ -e "${FIREWALL}" ]; then
restore
else
einfo "${FIREWALL} does not exists. Using default rules."
rules
fi
eend $?
}

stop() {
ebegin "Stopping firewall"
$IPTABLES -F
$IPTABLES -t nat -F
$IPTABLES -X
$IPTABLES -P FORWARD ACCEPT
$IPTABLES -P INPUT ACCEPT
$IPTABLES -P OUTPUT ACCEPT
eend $?
}

showstatus() {
ebegin "Status"
$IPTABLES -L -n -v --line-numbers
einfo "NAT status"
$IPTABLES -L -n -v --line-numbers -t nat
eend $?
}

panic() {
ebegin "Setting panic rules"
$IPTABLES -F
$IPTABLES -X
$IPTABLES -t nat -F
$IPTABLES -P FORWARD DROP
$IPTABLES -P INPUT DROP
$IPTABLES -P OUTPUT DROP
$IPTABLES -A INPUT -i lo -j ACCEPT
$IPTABLES -A OUTPUT -o lo -j ACCEPT
eend $?
}

save() {
ebegin "Saving Firewall rules"
$IPTABLESSAVE > $FIREWALL
eend $?
}

restore() {
ebegin "Restoring Firewall rules"
$IPTABLESRESTORE < $FIREWALL
eend $?
}

restart() {
svc_stop; svc_start
}

showoptions() {
echo "Usage: $0 {start|save|restore|panic|stop|restart|showstatus}"
echo "start) will restore setting if exists else force rules"
echo "stop) delete all rules and set all to accept"
echo "rules) force settings of new rules"
echo "save) will store settings in ${FIREWALL}"
echo "restore) will restore settings from ${FIREWALL}"
echo "showstatus) Shows the status"
}