Можно ли доверять данным SMART palimpsest?

Что означают постоянные остановки тестов из-за ошибки чтения?

Дискокапец.

Попробуй то же со smartctl.

Ноутбук подвергся удару об стену находясь в рюкзаке, забитом учебниками. Не по моей вине.

Рюкзак кинули со всего размаху.

внезапно. а под камаз не попадал. да, и разве это может повлиять на работу хрупкого hdd

ладно, анон, щас попробую smartctl

то же самое говорит

лолчто, прям по-русски и говорит? выхлоп smartctl -a /dev/sd<диск> на пастебин

вот лог:

smartctl 5.42 2011-10-20 r3458 [i686-linux-3.2.6-2-ARCH] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint M5
Device Model:     SAMSUNG HM160HI
Serial Number:    S1WWJG0S698657
LU WWN Device Id: 5 0f0000 003698657
Firmware Version: HH100-06
User Capacity:    160,041,885,696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
Local Time is:    Mon Feb 20 22:31:56 2012 OMST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 112)	The previous self-test completed having
					the read element of the test failed.
Total time to complete Offline 
data collection: 		(   56) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  56) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   051    Pre-fail  Always       -       14
  3 Spin_Up_Time            0x0007   252   252   025    Pre-fail  Always       -       2000
  4 Start_Stop_Count        0x0032   097   097   000    Old_age   Always       -       3824
  5 Reallocated_Sector_Ct   0x0033   096   096   010    Pre-fail  Always       -       45
  7 Seek_Error_Rate         0x000e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   090   090   000    Old_age   Always       -       5509
 10 Spin_Retry_Count        0x0032   100   100   051    Old_age   Always       -       3
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1969
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       1988
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       168
194 Temperature_Celsius     0x0022   076   037   000    Old_age   Always       -       54 (Min/Max 8/67)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       14
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       3
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000a   100   100   000    Old_age   Always       -       23
201 Soft_Read_Error_Rate    0x0032   252   252   000    Old_age   Always       -       0
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       495
225 Load_Cycle_Count        0x0032   095   095   000    Old_age   Always       -       56478

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       00%      5509         175587921
# 2  Short offline       Completed: read failure       00%      5509         175587921
# 3  Extended offline    Completed: read failure       00%      5509         175587921
# 4  Extended offline    Completed: read failure       00%      5509         175587921
# 5  Extended offline    Completed: read failure       00%      5509         175587921
# 6  Extended offline    Completed: read failure       00%      5509         175587921
# 7  Short offline       Completed: read failure       00%      5508         175587921
# 8  Extended offline    Completed: read failure       00%      5508         175587921
# 9  Short offline       Completed: read failure       00%      5508         175587921
#10  Extended offline    Completed: read failure       00%      5508         175587921
#11  Extended offline    Completed: read failure       00%      5508         175587921
#12  Extended offline    Completed: read failure       00%      5508         175589065
#13  Extended offline    Completed: read failure       00%      5508         175590211

Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed_read_failure [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

мда, это печально (для винта)

новый винт покупать? скоро копец?

Ему уже капец.

Я уже убедился в этом, выполнив команду

cp -R /home/netcat /mnt