LINUX.ORG.RU
Форум — Admin  

не могу запустить квоты


0

1

При запуске квот выдает вот такую ошибку

quotacheck: Cannot guess format from filename on /dev/disk/by-uuid/f508a838-09b5-413d-99e2-a9f4fda3b62e. Please specify format on commandline.
quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.

fstab

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# / was on /dev/sda1 during installation
UUID=f508a838-09b5-413d-99e2-a9f4fda3b62e /               ext3    errors=remount-ro,grpquota,usrquota 0       1
# swap was on /dev/sda5 during installation
/dev/sdd1       swap    swap    sw      0       0
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto     0       0
/dev/sdb1       /mnt/www        ext3    defaults        0       0
/dev/sdc1       /mnt/bakcup     ext3    defaults        0       0
★
← Вопрос по сетям
ldap error:invalid credentials →

filesystem not mounted with quota option.

dada ★★★★★
()
Ответ на: комментарий от om-nom-nimouse 
:/# cat /proc/mounts
rootfs / rootfs rw 0 0
none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
none /proc proc rw,nosuid,nodev,noexec,relatime 0 0
none /dev devtmpfs rw,relatime,size=4092384k,nr_inodes=1023096,mode=755 0 0
none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
/dev/disk/by-uuid/f508a838-09b5-413d-99e2-a9f4fda3b62e / ext3 rw,relatime,errors=remount-ro,data=ordered,usrquota,grpquota 0 0
tmpfs /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
/dev/sdb1 /mnt/www ext3 rw,relatime,errors=continue,data=ordered 0 0
/dev/sdc1 /mnt/bakcup ext3 rw,relatime,errors=continue,data=ordered 0 0
iliaxxx ★
() автор топика

С какими опциями запускается quotacheck? Это первый запуск quotacheck для данной файловой системы? Если первый, то нужно запускать «quotacheck -с /»

mky ★★★★★
()
Ответ на: комментарий от mky

:/# quotacheck -c /

quotacheck: Cannot guess format from filename on /dev/disk/by-uuid/f508a838-09b5-413d-99e2-a9f4fda3b62e. Please specify format on commandline.

quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.

iliaxxx ★
() автор топика
Ответ на: комментарий от iliaxxx

Ради интереса решил поставить webmin. У него есть инструмент по работе с квотами. При помощи него тоже не смог включить квоты.

quotaon: cannot find //quota.user on /dev/disk/by-uuid/f508a838-09b5-413d-99e2-a9f4fda3b62e [/]

iliaxxx ★
() автор топика
Ответ на: комментарий от iliaxxx

Ну попробуйте указать формат явно:

quotacheck -c -F vfsv0 /

Если не поможет, запустите с дебугом (опция -d), может что интерестное напишет.

mky ★★★★★
()
Ответ на: комментарий от mky

Помог вот такой запуск:

quotacheck -d -m -c -F vfsv0 /

Но через 2 минуты после начала проверки выдало

quotacheck: Something weird happened while scanning. Error 2133571361

iliaxxx ★
() автор топика
Ответ на: комментарий от iliaxxx

Судя по ошибке это проблемы с жестким диском. Я запустил SMART проверку жеского диска, она не выявида никаких проблем.

smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD1503FYYS-01T8B0
Serial Number:    WD-WMAUR0177330
Firmware Version: 01.00D02
User Capacity:    1,500,301,910,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Fri Oct 26 08:00:33 2012 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 121)	The previous self-test completed having
					the read element of the test failed.
Total time to complete Offline 
data collection: 		 (22260) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 255) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x303f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   161   139   021    Pre-fail  Always       -       8933
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       102
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   082   082   000    Old_age   Always       -       13727
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       100
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       67
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       34
194 Temperature_Celsius     0x0022   115   090   000    Old_age   Always       -       37
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   195   195   000    Old_age   Always       -       1422
198 Offline_Uncorrectable   0x0030   195   195   000    Old_age   Offline      -       1248
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       1630
200 Multi_Zone_Error_Rate   0x0008   190   188   000    Old_age   Offline      -       2009

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       90%     13727         1102657806
# 2  Short offline       Completed: read failure       90%     13727         1102655683

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
iliaxxx ★
() автор топика
Ответ на: комментарий от iliaxxx

В /var/log/messages 

Oct 26 07:41:09 ms-home kernel: [341577.085731] ata1.00: configured for UDMA/133
Oct 26 07:41:09 ms-home kernel: [341577.085741] ata1: EH complete
Oct 26 07:41:11 ms-home kernel: [341579.000675] ata1.00: configured for UDMA/133
Oct 26 07:41:11 ms-home kernel: [341579.000681] ata1: EH complete
Oct 26 07:41:13 ms-home kernel: [341580.924342] ata1.00: configured for UDMA/133
Oct 26 07:41:13 ms-home kernel: [341580.924354] ata1: EH complete
Oct 26 07:41:15 ms-home kernel: [341582.842615] ata1.00: configured for UDMA/133
Oct 26 07:41:15 ms-home kernel: [341582.842624] ata1: EH complete
Oct 26 07:41:17 ms-home kernel: [341584.762568] ata1.00: configured for UDMA/133
Oct 26 07:41:17 ms-home kernel: [341584.762574] ata1: EH complete
Oct 26 07:41:19 ms-home kernel: [341586.676527] ata1.00: configured for UDMA/133
Oct 26 07:41:19 ms-home kernel: [341586.676552] sd 0:0:0:0: [sda] Unhandled sense code
Oct 26 07:41:19 ms-home kernel: [341586.676553] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Oct 26 07:41:19 ms-home kernel: [341586.676556] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Oct 26 07:41:19 ms-home kernel: [341586.676559] Descriptor sense data with sense descriptors (in hex):
Oct 26 07:41:19 ms-home kernel: [341586.676561]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
Oct 26 07:41:19 ms-home kernel: [341586.676567]         41 bc 09 2f
Oct 26 07:41:19 ms-home kernel: [341586.676569] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
Oct 26 07:41:19 ms-home kernel: [341586.676573] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 41 bc 08 d0 00 01 00 00
Oct 26 07:41:19 ms-home kernel: [341586.677106] ata1: EH complete
Oct 26 07:41:21 ms-home kernel: [341588.600494] ata1.00: configured for UDMA/133
Oct 26 07:41:21 ms-home kernel: [341588.600505] ata1: EH complete
Oct 26 07:41:23 ms-home kernel: [341590.508451] ata1.00: configured for UDMA/133
Oct 26 07:41:23 ms-home kernel: [341590.508463] ata1: EH complete
Oct 26 07:41:24 ms-home kernel: [341592.416390] ata1.00: configured for UDMA/133
Oct 26 07:41:24 ms-home kernel: [341592.416397] ata1: EH complete
Oct 26 07:41:26 ms-home kernel: [341594.324316] ata1.00: configured for UDMA/133
Oct 26 07:41:26 ms-home kernel: [341594.324323] ata1: EH complete
Oct 26 07:41:28 ms-home kernel: [341596.232305] ata1.00: configured for UDMA/133
Oct 26 07:41:28 ms-home kernel: [341596.232318] ata1: EH complete
Oct 26 07:41:30 ms-home kernel: [341598.141213] ata1.00: configured for UDMA/133
Oct 26 07:41:30 ms-home kernel: [341598.141225] sd 0:0:0:0: [sda] Unhandled sense code
Oct 26 07:41:30 ms-home kernel: [341598.141227] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Oct 26 07:41:30 ms-home kernel: [341598.141229] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Oct 26 07:41:30 ms-home kernel: [341598.141232] Descriptor sense data with sense descriptors (in hex):
Oct 26 07:41:30 ms-home kernel: [341598.141234]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
Oct 26 07:41:30 ms-home kernel: [341598.141240]         41 bc 09 2f
Oct 26 07:41:30 ms-home kernel: [341598.141242] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
Oct 26 07:41:30 ms-home kernel: [341598.141246] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 41 bc 09 28 00 00 08 00
Oct 26 07:41:30 ms-home kernel: [341598.141302] __ratelimit: 12 callbacks suppressed
Oct 26 07:41:30 ms-home kernel: [341598.141372] ata1: EH complete

iliaxxx ★
() автор топика
Ответ на: комментарий от iliaxxx

UDMA_CRC_Error_Count — это скорее всего проблема в шлейфе, или перегрев контроллера дисков.

Multi_Zone_Error_Rate тоже плохо;

Selt-test'ы не проходят (Completed: read failure). Хотя на время запуска selt-test'ов диск лучше отмонтировать, чтобы к нему не было обращений и reset'ов диска из-за ошибок при обращении к нему. Так как он у вас с «/» разделом, получается, что нужно загрузить систему с другого носителя. И тестировать диск как SMART self-test'ами, таки и badblocks (read only, non-destructive read-write тесты). А для начала можно с работающей системы просто попробовать сделать чтение всего диска с помощью команды «dd».

mky ★★★★★
()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.
← Вопрос по сетям
Admin
ldap error:invalid credentials →