Acer v3-571g + debian wheezy + bumblebeed

Как бы принято давать ссылки на инструкции, по которым делалось, а еще лучше конкретно описывать, что сделал. Телепаты в отпуске. Что там в bumblebee.conf?

Руководство по установке

Содержание bumblebee.conf: # Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart # to take effect. [bumblebeed] # The secondary Xorg server DISPLAY number VirtualDisplay=:8 # Should the unused Xorg server be kept running? Set this to true if waiting # for X to be ready is too long and don't need power management at all. KeepUnusedXServer=false # The name of the Bumbleblee server group name (GID name) ServerGroup=bumblebee # Card power state at exit. Set to false if the card shoud be ON when Bumblebee # server exits. TurnCardOffAtExit=false # The default behavior of '-f' option on optirun. If set to "true", '-f' will # be ignored. NoEcoModeOverride=false # The Driver used by Bumblebee server. If this value is not set (or empty), # auto-detection is performed. The available drivers are nvidia and nouveau # (See also the driver-specific sections below) Driver= # Directory with a dummy config file to pass as a -configdir to secondary X XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed. [optirun] # Acceleration/ rendering bridge, possible values are auto, virtualgl and # primus. Bridge=auto # The method used for VirtualGL to transport frames between X servers. # Possible values are proxy, jpeg, rgb, xv and yuv. VGLTransport=proxy # List of paths which are searched for the primus libGL.so.1 when using # the primus bridge PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus # Should the program run under optirun even if Bumblebee server or nvidia card # is not available? AllowFallbackToIGC=false

# Driver-specific settings are grouped under [driver-NAME]. The sections are # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto- # detection resolves to NAME). # PMMethod: method to use for saving power by disabling the nvidia card, valid # values are: auto - automatically detect which PM method to use # bbswitch - new in BB 3, recommended if available # switcheroo - vga_switcheroo method, use at your own risk # none - disable PM completely # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods ## Section with nvidia driver specific options, only parsed if Driver=nvidia [driver-nvidia] # Module name to load, defaults to Driver if empty or unset KernelDriver=nvidia-current PMMethod=auto # colon-separated path to the nvidia libraries LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia # comma-separated path of the directory containing nvidia_drv.so and the # default Xorg modules path XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau [driver-nouveau] KernelDriver=nouveau PMMethod=auto XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

Как устанавливал см. выше. Одной строкой.sudo dpkg --add-architecture i386 && sudo apt-get update && sudo apt-get install -t wheezy-backports bumblebee-nvidia primus primus-libs:i386

Шина в xorg.nvidia.conf раскоментирована? nvidia-driver=nvidia(или nvidia-current, точно не помню) и nvidia=nvidia, прописал в bumblebee.conf?

Driver=nvidia

KernelDriver=nvidia

И будет тебе счастье.

Не работает (

Вот так выглядит /etc/bumblebee/xorg.conf.nvidia

Section "ServerLayout" Identifier "Layout0" Option "AutoAddDevices" "false" Option "AutoAddGPU" "false" EndSection

Section "Device" Identifier "DiscreteNvidia" # Driver "nvidia-current" Driver "nvidia VendorName "NVIDIA Corporation"

# If the X server does not automatically detect your VGA device, # you can manually set it here. # To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data # as you see in the commented example. # This Setting may be needed in some platforms with more than one # nvidia card, which may confuse the proprietary driver (e.g., # trying to take ownership of the wrong device). Also needed on Ubuntu 13.04. BusID "PCI:00:02:0"

# Setting ProbeAllGpus to false prevents the new proprietary driver # instance spawned to try to control the integrated graphics card, # which is already being managed outside bumblebee. # This option doesn't hurt and it is required on platforms running # more than one nvidia graphics card with the proprietary driver. # (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT). # If this option is not set, the new Xorg may blacken the screen and # render it unusable (unless you have some way to run killall Xorg). Option "ProbeAllGpus" "false"

Option "NoLogo" "true" Option "UseEDID" "false" Option "UseDisplayDevice" "none" EndSection

вот так /etc/bumblebee/bumblebee.conf

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart # to take effect. [bumblebeed] # The secondary Xorg server DISPLAY number VirtualDisplay=:8 # Should the unused Xorg server be kept running? Set this to true if waiting # for X to be ready is too long and don't need power management at all. KeepUnusedXServer=false # The name of the Bumbleblee server group name (GID name) ServerGroup=bumblebee # Card power state at exit. Set to false if the card shoud be ON when Bumblebee # server exits. TurnCardOffAtExit=false # The default behavior of '-f' option on optirun. If set to "true", '-f' will # be ignored. NoEcoModeOverride=false # The Driver used by Bumblebee server. If this value is not set (or empty), # auto-detection is performed. The available drivers are nvidia and nouveau # (See also the driver-specific sections below) Driver=nvidia # Directory with a dummy config file to pass as a -configdir to secondary X XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed. [optirun] # Acceleration/ rendering bridge, possible values are auto, virtualgl and # primus. Bridge=auto # The method used for VirtualGL to transport frames between X servers. # Possible values are proxy, jpeg, rgb, xv and yuv. VGLTransport=proxy # List of paths which are searched for the primus libGL.so.1 when using # the primus bridge PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus # Should the program run under optirun even if Bumblebee server or nvidia card # is not available? AllowFallbackToIGC=false

# Driver-specific settings are grouped under [driver-NAME]. The sections are # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto- # detection resolves to NAME). # PMMethod: method to use for saving power by disabling the nvidia card, valid # values are: auto - automatically detect which PM method to use # bbswitch - new in BB 3, recommended if available # switcheroo - vga_switcheroo method, use at your own risk # none - disable PM completely # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia [driver-nvidia] # Module name to load, defaults to Driver if empty or unset KernelDriver=nvidia PMMethod=auto # colon-separated path to the nvidia libraries LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia # comma-separated path of the directory containing nvidia_drv.so and the # default Xorg modules path XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau [driver-nouveau] KernelDriver=nouveau PMMethod=auto XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

Вывод команды:

paul@platinum:~$ lspci | egrep 'VGA|3D' 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0fe1 (rev a1)

Ошибка после перезагрузки: paul@platinum:~$ optirun glxgears -info [ 681.697260] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver

[ 681.697305] [ERROR]Aborting because fallback start is disabled. [\inline]

Правда в выводе dmesg не наблюдаю предыдущей ошибки.

В lspci ответ уже написан. BusID в xorg.nvidia.conf замени BusID nvidia из lspci, то есть: BusID «PCI:01:00.0». Также не забудь перезапусть bumblebee: service bumblebeed restart

Изменил, не работает.

Ошибка идет [ 1466.779843] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver [\inline]

судя по мануалу, железо он видит, он драйвер подгрузить не может.

Тогда KernelDriver=nvidia-current. Как и было изначально. В мануале так и написано же.

Не работает(((

bumblebee перезагрузил? Дай еще раз вывод bumblebee.conf и xorg.nvidia.conf. В теории должно было заработать. По крайней мере у меня все работало. Да и глупый вопрос: ты nvidia-driver поставил?

Да перезапускал, да, драйвер автоматом тянется при установке.

Section "ServerLayout" Identifier "Layout0" Option "AutoAddDevices" "false" Option "AutoAddGPU" "false" EndSection

Section "Device" Identifier "DiscreteNvidia" Driver "nvidia-current" # Driver "nvidia VendorName "NVIDIA Corporation"

# If the X server does not automatically detect your VGA device, # you can manually set it here. # To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data # as you see in the commented example. # This Setting may be needed in some platforms with more than one # nvidia card, which may confuse the proprietary driver (e.g., # trying to take ownership of the wrong device). Also needed on Ubuntu 13.04. BusID "PCI:01:00:0"

# Setting ProbeAllGpus to false prevents the new proprietary driver # instance spawned to try to control the integrated graphics card, # which is already being managed outside bumblebee. # This option doesn't hurt and it is required on platforms running # more than one nvidia graphics card with the proprietary driver. # (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT). # If this option is not set, the new Xorg may blacken the screen and # render it unusable (unless you have some way to run killall Xorg). Option "ProbeAllGpus" "false"

Option "NoLogo" "true" Option "UseEDID" "false" Option "UseDisplayDevice" "none" EndSection [\inline]

Driver=nvidia, а не nvidia-current.

KernelDriver=nvidia-current - правильно.

Пожалуйста, будь внимательнее.

исправил, перезагрузил ноут, не работает.

закоментил в xorg.nvidia.conf сведения о шине. перезапустил сервис. ошибка та же.

Ошибка та же? Если та же: ты добавил себя в группу bumblebee? Если нет, тогда я не знаю. Оно просто обязано работать. Можешь попробовать переустановить, конечно же. apt-get install nvidia-driver(или nvidia-kernel-dkms) bumblebee bumblebee-nvidia. Настройки тебе известны: BusID «PCI:01:00:0» Nvidia=nvidia KernelDriver=nvidia-current(можешь попробовать просто nvidia) gpasswd -a <имя пользователя> bumblebee.

Буду пробовать перенакатить