Есть флешка E902 с важными данными, она не определяется. Файловая система на ней была скорее всего FAT32. в lsblk не отображается.
Детали под катом
sudo mount /dev/sdd /mnt/1
mount: no medium found on /dev/sdd
sudo fdisk /dev/sdd -l
fdisk: невозможно открыть /dev/sdd: Носитель не найден
lsusb
Bus 002 Device 010: ID 13fe:3e00 Kingston Technology Company Inc. Flash Drive
dmesg
[796875.229114] usb 3-1: new high-speed USB device number 4 using xhci_hcd
[796875.414247] usb 3-1: New USB device found, idVendor=13fe, idProduct=3e00
[796875.414253] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[796875.414257] usb 3-1: Product: 2267 PRAM
[796875.414260] usb 3-1: Manufacturer:
[796875.415400] usb-storage 3-1:1.0: USB Mass Storage device detected
[796875.415804] scsi host13: usb-storage 3-1:1.0
[796876.413795] scsi 13:0:0:0: Direct-Access 2267 PRAM 1.00 PQ: 0 ANSI: 0 CCS
[796876.414678] sd 13:0:0:0: Attached scsi generic sg2 type 0
[796876.415577] sd 13:0:0:0: [sdd] Attached SCSI removable disk
sudo sdparm -a /dev/sdd
/dev/sdd: 2267 PRAM 1.00
Read write error recovery mode page:
AWRE 0 [cha: n, def: 0, sav: 0]
ARRE 0 [cha: n, def: 0, sav: 0]
TB 0 [cha: n, def: 0, sav: 0]
RC 0 [cha: n, def: 0, sav: 0]
EER 0 [cha: n, def: 0, sav: 0]
PER 0 [cha: n, def: 0, sav: 0]
DTE 0 [cha: n, def: 0, sav: 0]
DCR 0 [cha: n, def: 0, sav: 0]
RRC 48 [cha: y, def: 48, sav:255]
COR_S 0 [cha: n, def: 0, sav: 0]
HOC 0 [cha: n, def: 0, sav: 0]
DSOC 0 [cha: n, def: 0, sav: 0]
LBPERE 0 [cha: n, def: 0, sav: 0]
WRC 0 [cha: n, def: 0, sav: 0]
RTL 0 [cha: n, def: 0, sav: 0]
Power condition mode page:
PM_BG 0 [cha: n, def: 0, sav: 0]
STANDBY_Y 0 [cha: n, def: 0, sav: 0]
IDLE_C 0 [cha: n, def: 0, sav: 0]
IDLE_B 0 [cha: n, def: 0, sav: 0]
IDLE 1 [cha: y, def: 1, sav: 1]
STANDBY 1 [cha: y, def: 1, sav: 1]
ICT 0 [cha: n, def: 0, sav: 0]
SCT 0 [cha: n, def: 0, sav: 0]
Power consumption mode page:
ps_id 0 [cha: n, def: 0, sav: 0]
SAT ATA Power condition mode page:
APMP 0 [cha: n, def: 0, sav: 0]
APM 0 [cha: n, def: 0, sav: 0]
