Pulseaudio не видит звуковую карту

$ journalctl --user-unit pulseaudio.service
Hint: You are currently not seeing messages from the system.
      Users in the 'systemd-journal' group can see all messages. Pass -q to
      turn off this notice.
No journal files were opened due to insufficient permissions.

# journalctl --user-unit pulseaudio.service
-- Logs begin at Sat 2020-06-27 20:59:05 MSK, end at Sat 2020-06-27 23:45:23 MSK
-- No entries --
lines 1-2/2 (END)

systemctl --user list-dependencies default.target

$ systemctl --user list-dependencies default.target
default.target
● └─basic.target
●   ├─paths.target
●   ├─sockets.target
●   │ ├─dbus.socket
●   │ ├─dirmngr.socket
●   │ ├─gpg-agent-browser.socket
●   │ ├─gpg-agent-extra.socket
●   │ ├─gpg-agent-ssh.socket
●   │ ├─gpg-agent.socket
●   │ └─pulseaudio.socket
●   └─timers.target

ls -l /etc/systemd/user/default.target.wants/
ls: невозможно получить доступ к '/etc/systemd/user/default.target.wants/': Нет такого файла или каталога

inxi -SA
cat /etc/pulse/default.pa
pacmd list-sinks

$ ls -l /etc/systemd/user/default.target.wants/
ls: невозможно получить доступ к '/etc/systemd/user/default.target.wants/': Нет такого файла или каталога

$ inxi -SA
bash: inxi: команда не найдена
$ cat /etc/pulse/default.pa
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GSettings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif


### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

### Make some devices default
#set-default-sink output
#set-default-source input

$ pacmd list-sinks
1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_03_04.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9039
	volume: front-left: 98304 / 150% / 10,57 dB,   front-right: 98304 / 150% / 10,57 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2-канальный 4410
	channel map: front-left,front-right
	             Стерео
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
	card: 1 <alsa_card.pci-0000_03_04.0>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "Multichannel"
		alsa.id = "Multichannel"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "Xonar DX"
		alsa.long_card_name = "Asus Virtuoso 100 at 0xe800, irq 17"
		alsa.driver_name = "snd_virtuoso"
		device.bus_path = "pci-0000:03:04.0"
		sysfs.path = "/devices/pci0000:00/0000:00:05.0/0000:02:00.0/0000:03:04.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "13f6"
		device.vendor.name = "C-Media Electronics Inc"
		device.product.id = "8788"
		device.product.name = "CMI8788 [Oxygen HD Audio] (Virtuoso 100 (Xonar DX))"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "352800"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Аналоговый стерео"
		device.description = "CMI8788 [Oxygen HD Audio] (Virtuoso 100 (Xonar DX)) Аналоговый стерео"
		alsa.mixer_name = "AV200"
		alsa.components = "CS4398 CS4362A CS5361 AV200"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output: Аналоговый выход (priority 9900, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <analog-output>

sudo apt install inxi
inxi -SA
cat /etc/pulse/default.pa
pacmd list-sinks

inxi -SA
System:
  Host: dragonfly Kernel: 4.19.0-9-amd64 x86_64 bits: 64 
  Desktop: Gnome 3.30.2 Distro: Debian GNU/Linux 10 (buster) 
Audio:
  Device-1: AMD SBx00 Azalia driver: snd_hda_intel 
  Device-2: AMD RV670/680 HDMI Audio [Radeon HD 3690/3800 Series] 
  driver: snd_hda_intel 
  Device-3: C-Media CMI8788 [Oxygen HD Audio] driver: snd_virtuoso 
  Device-4: Philips s SAA7131/SAA7133/SAA7135 Video Broadcast Decoder 
  driver: saa7134 
  Sound Server: ALSA v: k4.19.0-9-amd64