LINUX.ORG.RU
решено Форум — Desktop  

Как вернуть нормальную оконную систему на freebsd? Plasma

 ,


0

1

Устанавливал как всегда freebsd13, только в этот раз произошло что-то странное. Сначала при загрузке ОС монитор не работал, хотя обычно я сразу видел меню входа. Ну ладно, я зашёл по ssh и установил видеодрайвер. Теперь запускается, просит ввод пароля на экране входа в систему и там выбор: есть wayland, user session и x11. Wayland еще дорабатывают, я всегда выбирал user session. Но сейчас user session не работает, но зато x11, которого небыло раньше, работает. Что я пропустил? Мне не нравится смотреть на оконную систему x11, хочу вернуть как было. Неужели, мне придётся патчить старые кде?

Комп на amd-ryzen, ddr4(8Gb)озу, устанавливал как на bios. Видеокарта radeon, в неё был подключен монитор при установке. Похоже, что freebsd видео не работает с видеокартой, пока не настроишь.



Последнее исправление: pinux (всего исправлений: 3)
← Chrom browser - как увеличить фонт в адресной строке?
винрар →

Зато не блоб! Зато всё работает (искаропки).

anonymous
()

Какие-то меню входа, видеодрайверы, экраны входа…

Что ты устанавливал? Как ты это устанавливал?

Показывай loader.conf, rc.conf, xorg.conf.d/*.conf, выхлоп dmesg(8), и логи.

mord0d ★★★★★
()
Ответ на: комментарий от mord0d

Какие-то меню входа, видеодрайверы, экраны входа…

DM, меню входа - один йух

Что ты устанавливал? Как ты это устанавливал?

кде из портов: pkg install xorg kde5 kdevelop sddm firefox , /usr/ports/graphics/mesa-demos и drm-kmod

Показывай loader.conf

aesni_load="YES"
geom_eli_load="YES"
kern.geom.label.disk_ident.enable="0"
kern.geom.label.gptid.enable="0"
cryptodev_load="YES"
zfs_load="YES"

rc.conf

ifconfig_re0="DHCP"
sshd_enable="YES"
moused_enable="YES"
ntpd_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
zfs_enable="YES"
dbus_enable="YES"
sddm_enable="YES"

kld_list="/boot/modules/radeonkms.ko"

xorg.conf.d/*.conf

xorg.conf.d/: No such file or directory

pinux
() автор топика
Ответ на: комментарий от mord0d 

---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr  9 04:24:09 UTC 2021
    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(vga): resolution 640x480
CPU: AMD Ryzen 3 3100 4-Core Processor               (3600.08-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x870f10  Family=0x17  Model=0x71  Stepping=0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
  Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
  Structured Extended Features2=0x400004<UMIP,RDPID>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD>
  SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8234291200 (7852 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 2 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 5 6 4 2 7 3 1
Timecounter "TSC-low" frequency 1800038016 Hz quality 1000
KTLS: Initialized 8 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000059 [4354] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0: <VT VGA driver>
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.3 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 32 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 33 at device 0.1 on pci1
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 34 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 32 at device 4.0 on pci2
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfcb04000-0xfcb04fff,0xfcb00000-0xfcb03fff irq 32 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 2c:f0:5d:27:12:37
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib4: <ACPI PCI-PCI bridge> irq 33 at device 5.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 34 at device 6.0 on pci2
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 35 at device 7.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xfcf20000-0xfcf3ffff irq 54 at device 0.0 on pci7
vgapci0: Boot video device
hdac0: <ATI RV930 HDA Controller> mem 0xfcf40000-0xfcf43fff irq 55 at device 0.1 on pci7
pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <unknown> at device 0.0 (no driver attached)
pci9: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc800000-0xfc8fffff irq 39 at device 0.3 on pci9
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD X570 HDA Controller> mem 0xfca00000-0xfca07fff irq 36 at device 0.4 on pci9
pcib10: <ACPI PCI-PCI bridge> at device 8.2 on pci0
pci10: <ACPI PCI bus> on pcib10
ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfce00000-0xfce007ff irq 41 at device 0.0 on pci10
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich8: <AHCI channel> at channel 0 on ahci1
pcib11: <ACPI PCI-PCI bridge> at device 8.3 on pci0
pci11: <ACPI PCI bus> on pcib11
ahci2: <AMD KERNCZ AHCI SATA controller> mem 0xfcd00000-0xfcd007ff irq 45 at device 0.0 on pci11
ahci2: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich9: <AHCI channel> at channel 0 on ahci2
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm2: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 CAM usbus1
ugen1.1: <0x1022 XHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
pinux
() автор топика
Ответ на: комментарий от mord0d 
uhub1 on usbus0
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SA400S37120G SBFKB1E1> ACS-3 ATA SATA 3.x device
ada0: Serial Number 50026B778265D195
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST380819AS 8.04> ATA-7 SATA 2.x device
ada1: Serial Number 5MR64JYF
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 76292MB (156247887 512 byte sectors)
GEOM_ELI: Device ada0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:     Crypto: accelerated software
uhub0: 8 ports with 8 removable, self powered
Root mount waiting for: usbus0 usbus1
uhub1: 22 ports with 22 removable, self powered
ugen1.2: <Generic Mass Storage> at usbus1
umass0 on uhub0
umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.00, addr 1> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x4101
umass0:6:0: Attached to scbus6
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Generic Flash Disk 8.07> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 14A0D0A68083
da0: 40.000MB/s transfers
da0: 7696MB (15761480 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen0.2: <Logitech USB Optical Mouse> at usbus0
[drm] radeon kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] initializing kernel modesetting (TURKS 0x1002:0x6758 0x1043:0x03E0 0x00).
[drm ERROR :radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO
ATOM BIOS: 6758.13.12.0.8.AS03
drmn0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
drmn0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
Successfully added WC MTRR for [0xe0000000-0xefffffff]: 0; 
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 4149276 KiB
[TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading TURKS Microcode
drmn0: successfully loaded firmware image 'radeon/TURKS_pfp.bin'
drmn0: successfully loaded firmware image 'radeon/TURKS_me.bin'
drmn0: successfully loaded firmware image 'radeon/BTC_rlc.bin'
drmn0: successfully loaded firmware image 'radeon/TURKS_mc.bin'
drmn0: successfully loaded firmware image 'radeon/TURKS_smc.bin'
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
drmn0: successfully loaded firmware image 'radeon/SUMO_uvd.bin'
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
drmn0: WB enabled
drmn0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xfffff80042103c00
drmn0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xfffff80042103c0c
drmn0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0xfffff800e0072118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
drmn0: radeon: MSI limited to 32-bit
drmn0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 3 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Connector HDMI-A-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DVI-D-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector VGA-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.VGA-1
[drm]   - kern.vt.fb.default_mode
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   HDMI-A-1
[drm]   HPD2
[drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm]   DVI-D-1
[drm]   HPD1
[drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm]   VGA-1
[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xE0363000
[drm] vram apper at 0xE0000000
[drm] size 5324800
[drm] fb depth is 24
[drm]    pitch is 5888
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "vga" with new "fb".
[drm ERROR :btc_dpm_set_power_state] rv770_restrict_performance_levels_before_switch failed
start FB_INFO:
type=11 height=900 width=1440 depth=32
cmsize=16 size=5324800
pbase=0xe0363000 vbase=0xfffff800e0363000
name=drmn0 flags=0x0 stride=5888 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
lo0: link state changed to UP
re0: link state changed to DOWN
ums0 on uhub1
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 1> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
re0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)
pinux
() автор топика
Ответ на: комментарий от mord0d

логи Xorg.0.log

[   228.151] (--) Log file renamed from "/var/log/Xorg.pid-1322.log" to "/var/log/Xorg.0.log"
[   228.151] 
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[   228.151] Build Operating System: FreeBSD 13.0-RELEASE-p3 amd64 
[   228.151] Current Operating System: FreeBSD freebsd13 13.0-RELEASE FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr  9 04:24:09 UTC 2021     root@releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
[   228.152] Build Date: 04 July 2021  07:24:23AM
[   228.152]  
[   228.152] Current version of pixman: 0.40.0
[   228.152] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   228.152] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   228.152] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 10 13:27:24 2021
[   228.152] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[   228.152] (==) No Layout section.  Using the first Screen section.
[   228.152] (==) No screen section available. Using defaults.
[   228.152] (**) |-->Screen "Default Screen Section" (0)
[   228.152] (**) |   |-->Monitor "<default monitor>"
[   228.152] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   228.152] (==) Automatically adding devices
[   228.152] (==) Automatically enabling devices
[   228.152] (==) Not automatically adding GPU devices
[   228.152] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   228.152] (==) FontPath set to:
	/usr/local/share/fonts/misc/,
	/usr/local/share/fonts/TTF/,
	/usr/local/share/fonts/OTF/,
	/usr/local/share/fonts/Type1/,
	/usr/local/share/fonts/100dpi/,
	/usr/local/share/fonts/75dpi/,
	catalogue:/usr/local/etc/X11/fontpath.d
[   228.152] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[   228.152] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   228.152] (II) Loader magic: 0x435a90
[   228.152] (II) Module ABI versions:
[   228.152] 	X.Org ANSI C Emulation: 0.4
[   228.152] 	X.Org Video Driver: 24.1
[   228.152] 	X.Org XInput driver : 24.1
[   228.152] 	X.Org Server Extension : 10.0
[   228.152] (--) PCI:*(41@0:0:0) 1002:6758:1043:03e0 rev 0, Mem @ 0xe0000000/268435456, 0xfcf20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/65536
[   228.152] (II) LoadModule: "glx"
[   228.152] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[   228.153] (II) Module glx: vendor="X.Org Foundation"
[   228.153] 	compiled for 1.20.11, module version = 1.0.0
[   228.153] 	ABI class: X.Org Server Extension, version 10.0
[   228.153] (==) Matched ati as autoconfigured driver 0
[   228.153] (==) Matched modesetting as autoconfigured driver 1
[   228.153] (==) Matched scfb as autoconfigured driver 2
[   228.153] (==) Matched vesa as autoconfigured driver 3
[   228.153] (==) Assigned the driver to the xf86ConfigLayout
[   228.153] (II) LoadModule: "ati"
[   228.153] (WW) Warning, couldn't open module ati
[   228.153] (EE) Failed to load module "ati" (module does not exist, 0)
[   228.153] (II) LoadModule: "modesetting"
[   228.153] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so
[   228.153] (II) Module modesetting: vendor="X.Org Foundation"
[   228.153] 	compiled for 1.20.11, module version = 1.20.11
[   228.153] 	Module class: X.Org Video Driver
[   228.153] 	ABI class: X.Org Video Driver, version 24.1
[   228.153] (II) LoadModule: "scfb"
[   228.153] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so
[   228.153] (II) Module scfb: vendor="X.Org Foundation"
[   228.153] 	compiled for 1.20.11, module version = 0.0.5
[   228.153] 	ABI class: X.Org Video Driver, version 24.1
[   228.153] (II) LoadModule: "vesa"
[   228.153] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[   228.153] (II) Module vesa: vendor="X.Org Foundation"
[   228.153] 	compiled for 1.20.11, module version = 2.5.0
[   228.153] 	Module class: X.Org Video Driver
[   228.153] 	ABI class: X.Org Video Driver, version 24.1
[   228.153] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   228.153] (II) scfb: driver for wsdisplay framebuffer: scfb
[   228.153] (II) VESA: driver for VESA chipsets: vesa
[   228.153] (--) Using syscons driver with X support (version 2.0)
[   228.153] (++) using VT number 9

[   228.164] (**) modeset(0): claimed PCI slot 41@0:0:0
[   228.164] (II) modeset(0): using default device
[   228.164] (WW) Falling back to old probe method for scfb
[   228.164] scfb trace: probe start
[   228.164] scfb trace: probe done
[   228.164] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   228.165] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   228.165] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   228.165] (==) modeset(0): RGB weight 888
[   228.165] (==) modeset(0): Default visual is TrueColor
[   228.165] (II) Loading sub module "glamoregl"
[   228.165] (II) LoadModule: "glamoregl"
[   228.165] (II) Loading /usr/local/lib/xorg/modules/libglamoregl.so
[   228.168] (II) Module glamoregl: vendor="X.Org Foundation"
[   228.168] 	compiled for 1.20.11, module version = 1.0.1
[   228.168] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   228.219] (II) modeset(0): glamor X acceleration enabled on AMD TURKS (DRM 2.50.0 / 13.0-RELEASE, LLVM 10.0.1)
[   228.219] (II) modeset(0): glamor initialized
[   228.220] (II) modeset(0): Output HDMI-1 has no monitor section
[   228.220] (II) modeset(0): Output DVI-D-1 has no monitor section
[   228.247] (II) modeset(0): Output VGA-1 has no monitor section
[   228.247] (II) modeset(0): EDID for output HDMI-1
[   228.248] (II) modeset(0): EDID for output DVI-D-1
[   228.274] (II) modeset(0): EDID for output VGA-1
[   228.274] (II) modeset(0): Manufacturer: DEL  Model: d017  Serial#: 928400716
[   228.274] (II) modeset(0): Year: 2008  Week: 3
[   228.274] (II) modeset(0): EDID Version: 1.4
[   228.274] (II) modeset(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[   228.274] (II) modeset(0): Sync:  Separate  SyncOnGreen
[   228.274] (II) modeset(0): Max Image Size [cm]: horiz.: 37  vert.: 23
[   228.274] (II) modeset(0): Gamma: 2.20
[   228.274] (II) modeset(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[   228.274] (II) modeset(0): Default color space is primary color space
[   228.274] (II) modeset(0): First detailed timing is preferred mode
[   228.274] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[   228.274] (II) modeset(0): Display is continuous-frequency
[   228.274] (II) modeset(0): redX: 0.650 redY: 0.331   greenX: 0.317 greenY: 0.568
[   228.274] (II) modeset(0): blueX: 0.146 blueY: 0.091   whiteX: 0.312 whiteY: 0.328
[   228.274] (II) modeset(0): Supported established timings:
[   228.274] (II) modeset(0): 720x400@70Hz
[   228.274] (II) modeset(0): 640x480@60Hz
[   228.274] (II) modeset(0): 640x480@75Hz
[   228.274] (II) modeset(0): 800x600@60Hz
[   228.274] (II) modeset(0): 800x600@75Hz
[   228.274] (II) modeset(0): 1024x768@60Hz
[   228.274] (II) modeset(0): 1024x768@75Hz
[   228.274] (II) modeset(0): 1280x1024@75Hz
[   228.274] (II) modeset(0): Manufacturer's mask: 0
[   228.274] (II) modeset(0): Supported standard timings:
pinux
() автор топика
Ответ на: комментарий от pinux 
[   228.274] (II) modeset(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   228.274] (II) modeset(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   228.275] (II) modeset(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[   228.275] (II) modeset(0): Supported detailed timing:
[   228.275] (II) modeset(0): clock: 88.8 MHz   Image Size:  370 x 230 mm
[   228.275] (II) modeset(0): h_active: 1440  h_sync: 1488  h_sync_end 1520 h_blank_end 1600 h_border: 0
[   228.275] (II) modeset(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 926 v_border: 0
[   228.275] (II) modeset(0): Serial No: DX57381F7VEL
[   228.275] (II) modeset(0): Ranges: V min: 50 V max: 77 Hz, H min: 30 H max: 83 kHz, PixClock max 129000 kHz
[   228.275] (II) modeset(0): Maximum pixel width: 4136
[   228.275] (II) modeset(0): Supported aspect ratios: 4:3 16:9 16:10* 5:4 15:9
[   228.275] (II) modeset(0): Supported blankings: standard reduced
[   228.275] (II) modeset(0): Supported scalings: hshrink hstretch vshrink vstretch
[   228.275] (II) modeset(0): Buggy monitor, no preferred refresh rate given
[   228.275] (II) modeset(0): Monitor name: DELL SE178WFP
[   228.275] (II) modeset(0): EDID (in hex):
[   228.275] (II) modeset(0): 	00ffffffffffff0010ac17d04c455637
[   228.275] (II) modeset(0): 	031201046a251778efb690a654519125
[   228.275] (II) modeset(0): 	175054a54b008180714f950001010101
[   228.275] (II) modeset(0): 	010101010101ab22a0a050841a303020
[   228.275] (II) modeset(0): 	360072e61000001a000000ff00445835
[   228.275] (II) modeset(0): 	37333831463756454c0a000000fd0032
[   228.275] (II) modeset(0): 	4d1e530e0411b205f858f000000000fc
[   228.275] (II) modeset(0): 	0044454c4c205345313738574650001f
[   228.275] (II) modeset(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
[   228.275] (II) modeset(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
[   228.275] (II) modeset(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[   228.275] (II) modeset(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[   228.275] (II) modeset(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[   228.275] (II) modeset(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[   228.275] (II) modeset(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[   228.275] (II) modeset(0): Not using default mode "1280x720" (bad mode clock/interlace/doublescan)
[   228.275] (II) modeset(0): Not using default mode "1440x810" (bad mode clock/interlace/doublescan)
[   228.275] (II) modeset(0): Not using default mode "1440x810" (bad mode clock/interlace/doublescan)
[   228.275] (II) modeset(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
[   228.275] (II) modeset(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
[   228.275] (II) modeset(0): Printing probed modes for output VGA-1
[   228.275] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz eP)
[   228.275] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   228.275] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[   228.275] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[   228.275] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   228.275] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[   228.275] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[   228.275] (II) modeset(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz e)
[   228.275] (II) modeset(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[   228.275] (II) modeset(0): Modeline "1280x800"x74.9  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz e)
[   228.275] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[   228.275] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[   228.275] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   228.275] (II) modeset(0): Modeline "1280x768"x74.9  102.25  1280 1360 1488 1696  768 771 778 805 -hsync +vsync (60.3 kHz e)
[   228.275] (II) modeset(0): Modeline "1280x768"x60.0   68.25  1280 1328 1360 1440  768 771 778 790 +hsync -vsync (47.4 kHz e)
[   228.275] (II) modeset(0): Modeline "1280x720"x60.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[   228.275] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[   228.275] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   228.275] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[   228.275] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   228.275] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   228.275] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   228.275] (II) modeset(0): Modeline "960x720"x60.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   228.275] (II) modeset(0): Modeline "928x696"x60.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   228.275] (II) modeset(0): Modeline "896x672"x60.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   228.275] (II) modeset(0): Modeline "1024x576"x60.0   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[   228.275] (II) modeset(0): Modeline "1024x576"x60.0   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[   228.275] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[   228.275] (II) modeset(0): Modeline "1024x576"x59.9   42.08  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz)
[   228.275] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[   228.275] (II) modeset(0): Modeline "960x600"x59.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[   228.275] (II) modeset(0): Modeline "960x600"x60.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[   228.275] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz d)
pinux
() автор топика
Ответ на: комментарий от pinux 
[   228.275] (II) modeset(0): Modeline "960x540"x60.0   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[   228.275] (II) modeset(0): Modeline "960x540"x60.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[   228.275] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[   228.275] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[   228.275] (II) modeset(0): Modeline "800x600"x75.0  101.25  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[   228.275] (II) modeset(0): Modeline "800x600"x70.0   94.50  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[   228.275] (II) modeset(0): Modeline "800x600"x65.0   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[   228.275] (II) modeset(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   228.275] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   228.275] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   228.275] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   228.275] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   228.275] (II) modeset(0): Modeline "840x525"x60.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[   228.275] (II) modeset(0): Modeline "840x525"x59.9   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[   228.275] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[   228.275] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[   228.275] (II) modeset(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[   228.275] (II) modeset(0): Modeline "700x525"x74.8   77.90  700 732 892 956  525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[   228.275] (II) modeset(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   228.275] (II) modeset(0): Modeline "800x450"x59.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[   228.275] (II) modeset(0): Modeline "800x450"x59.8   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[   228.275] (II) modeset(0): Modeline "640x512"x75.0   67.50  640 648 720 844  512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[   228.275] (II) modeset(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   228.275] (II) modeset(0): Modeline "700x450"x60.0   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[   228.275] (II) modeset(0): Modeline "700x450"x59.9   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[   228.275] (II) modeset(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   228.275] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   228.275] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   228.275] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz d)
[   228.275] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   228.275] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[   228.275] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[   228.275] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   228.275] (II) modeset(0): Modeline "684x384"x59.9   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[   228.275] (II) modeset(0): Modeline "684x384"x59.9   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[   228.275] (II) modeset(0): Modeline "640x400"x59.9   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[   228.275] (II) modeset(0): Modeline "640x400"x60.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[   228.275] (II) modeset(0): Modeline "576x432"x75.0   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[   228.275] (II) modeset(0): Modeline "640x360"x59.9   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[   228.275] (II) modeset(0): Modeline "640x360"x59.8   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[   228.275] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[   228.275] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[   228.275] (II) modeset(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[   228.275] (II) modeset(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[   228.275] (II) modeset(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   228.275] (II) modeset(0): Modeline "512x288"x60.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[   228.275] (II) modeset(0): Modeline "512x288"x59.9   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[   228.275] (II) modeset(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[   228.275] (II) modeset(0): Modeline "480x270"x59.6   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[   228.275] (II) modeset(0): Modeline "480x270"x59.8   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[   228.275] (II) modeset(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[   228.275] (II) modeset(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[   228.275] (II) modeset(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   228.275] (II) modeset(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   228.275] (II) modeset(0): Modeline "432x243"x59.9   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[   228.275] (II) modeset(0): Modeline "432x243"x59.6   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[   228.275] (II) modeset(0): Modeline "320x240"x72.8   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[   228.275] (II) modeset(0): Modeline "320x240"x75.0   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[   228.275] (II) modeset(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   228.275] (II) modeset(0): Modeline "360x202"x59.5   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
pinux
() автор топика
Ответ на: комментарий от pinux 
[   228.275] (II) modeset(0): Modeline "360x202"x59.1   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[   228.275] (II) modeset(0): Modeline "320x180"x59.8    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[   228.275] (II) modeset(0): Modeline "320x180"x59.3    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[   228.275] (II) modeset(0): Output HDMI-1 disconnected
[   228.275] (II) modeset(0): Output DVI-D-1 disconnected
[   228.275] (II) modeset(0): Output VGA-1 connected
[   228.275] (II) modeset(0): Using exact sizes for initial modes
[   228.275] (II) modeset(0): Output VGA-1 using initial mode 1440x900 +0+0
[   228.275] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   228.275] (==) modeset(0): DPI set to (96, 96)
[   228.275] (II) Loading sub module "fb"
[   228.275] (II) LoadModule: "fb"
[   228.275] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[   228.276] (II) Module fb: vendor="X.Org Foundation"
[   228.276] 	compiled for 1.20.11, module version = 1.0.0
[   228.276] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   228.276] (II) UnloadModule: "scfb"
[   228.276] (II) Unloading scfb
[   228.276] (II) UnloadModule: "vesa"
[   228.276] (II) Unloading vesa
[   228.279] (==) modeset(0): Backing store enabled
[   228.279] (==) modeset(0): Silken mouse enabled
[   228.279] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[   228.279] (==) modeset(0): DPMS enabled
[   228.279] (II) modeset(0): [DRI2] Setup complete
[   228.279] (II) modeset(0): [DRI2]   DRI driver: r600
[   228.280] (II) modeset(0): [DRI2]   VDPAU driver: r600
[   228.280] (II) Initializing extension Generic Event Extension
[   228.280] (II) Initializing extension SHAPE
[   228.280] (II) Initializing extension MIT-SHM
[   228.280] (II) Initializing extension XInputExtension
[   228.280] (II) Initializing extension XTEST
[   228.280] (II) Initializing extension BIG-REQUESTS
[   228.280] (II) Initializing extension SYNC
[   228.281] (II) Initializing extension XKEYBOARD
[   228.281] (II) Initializing extension XC-MISC
[   228.281] (II) Initializing extension SECURITY
[   228.281] (II) Initializing extension XFIXES
[   228.281] (II) Initializing extension RENDER
[   228.281] (II) Initializing extension RANDR
[   228.282] (II) Initializing extension COMPOSITE
[   228.282] (II) Initializing extension DAMAGE
[   228.282] (II) Initializing extension MIT-SCREEN-SAVER
[   228.282] (II) Initializing extension DOUBLE-BUFFER
[   228.282] (II) Initializing extension RECORD
[   228.282] (II) Initializing extension DPMS
[   228.282] (II) Initializing extension Present
[   228.283] (II) Initializing extension DRI3
[   228.283] (II) Initializing extension X-Resource
[   228.283] (II) Initializing extension XVideo
[   228.283] (II) Initializing extension XVideo-MotionCompensation
[   228.283] (II) Initializing extension GLX
[   228.286] (II) AIGLX: Loaded and initialized r600
[   228.286] (II) GLX: Initialized DRI2 GL provider for screen 0
[   228.286] (II) Initializing extension XFree86-VidModeExtension
[   228.286] (II) Initializing extension XFree86-DGA
[   228.286] (II) Initializing extension XFree86-DRI
[   228.286] (II) Initializing extension DRI2
[   228.287] (II) modeset(0): Damage tracking initialized
[   228.287] (II) modeset(0): Setting screen physical size to 381 x 238
[   228.331] (II) config/udev: Adding input device System mouse (/dev/input/event0)
[   228.331] (**) System mouse: Applying InputClass "evdev pointer catchall"
[   228.331] (**) System mouse: Applying InputClass "libinput pointer catchall"
[   228.331] (II) LoadModule: "libinput"
[   228.331] (II) Loading /usr/local/lib/xorg/modules/input/libinput_drv.so
[   228.332] (II) Module libinput: vendor="X.Org Foundation"
[   228.332] 	compiled for 1.20.11, module version = 0.30.0
[   228.332] 	Module class: X.Org XInput Driver
[   228.332] 	ABI class: X.Org XInput driver, version 24.1
[   228.332] (II) Using input driver 'libinput' for 'System mouse'
[   228.332] (**) System mouse: always reports core events
[   228.332] (**) Option "Device" "/dev/input/event0"
[   228.332] (**) Option "_source" "server/udev"
[   228.333] (II) event0  - System mouse: is tagged by udev as: Mouse
[   228.333] (II) event0  - System mouse: device is a pointer
[   228.333] (II) event0  - System mouse: device removed
[   228.333] (**) Option "config_info" "udev:/dev/input/event0"
[   228.333] (II) XINPUT: Adding extended input device "System mouse" (type: MOUSE, id 6)
[   228.334] (**) Option "AccelerationScheme" "none"
[   228.334] (**) System mouse: (accel) selected scheme none/0
[   228.334] (**) System mouse: (accel) acceleration factor: 2.000
[   228.334] (**) System mouse: (accel) acceleration threshold: 4
[   228.334] (II) event0  - System mouse: is tagged by udev as: Mouse
[   228.334] (II) event0  - System mouse: device is a pointer
[   228.334] (II) config/udev: Adding input device System keyboard multiplexer (/dev/input/event1)
[   228.334] (**) System keyboard multiplexer: Applying InputClass "evdev keyboard catchall"
[   228.334] (**) System keyboard multiplexer: Applying InputClass "Evdev keyboard"
[   228.334] (**) System keyboard multiplexer: Applying InputClass "libinput keyboard catchall"
[   228.334] (II) Using input driver 'libinput' for 'System keyboard multiplexer'
[   228.334] (**) System keyboard multiplexer: always reports core events
[   228.334] (**) Option "Device" "/dev/input/event1"
[   228.334] (**) Option "_source" "server/udev"
[   228.334] (II) event1  - System keyboard multiplexer: is tagged by udev as: Keyboard
[   228.335] (II) event1  - System keyboard multiplexer: device is a keyboard
[   228.335] (II) event1  - System keyboard multiplexer: device removed
[   228.335] (**) Option "config_info" "udev:/dev/input/event1"
[   228.335] (II) XINPUT: Adding extended input device "System keyboard multiplexer" (type: KEYBOARD, id 7)
[   228.335] (**) Option "xkb_rules" "evdev"
[   228.354] (II) event1  - System keyboard multiplexer: is tagged by udev as: Keyboard
[   228.354] (II) event1  - System keyboard multiplexer: device is a keyboard
[   228.354] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   228.354] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   228.354] (**) Power Button: Applying InputClass "Evdev keyboard"
[   228.354] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   228.354] (II) Using input driver 'libinput' for 'Power Button'
[   228.354] (**) Power Button: always reports core events
[   228.354] (**) Option "Device" "/dev/input/event2"
[   228.354] (**) Option "_source" "server/udev"
[   228.355] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   228.355] (II) event2  - Power Button: device is a keyboard
pinux
() автор топика
Ответ на: комментарий от pinux 
[   228.355] (II) event2  - Power Button: device removed
[   228.355] (**) Option "config_info" "udev:/dev/input/event2"
[   228.355] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   228.355] (**) Option "xkb_rules" "evdev"
[   228.355] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   228.355] (II) event2  - Power Button: device is a keyboard
[   228.355] (II) config/udev: Adding input device AT keyboard (/dev/input/event3)
[   228.355] (**) AT keyboard: Applying InputClass "evdev keyboard catchall"
[   228.355] (**) AT keyboard: Applying InputClass "Evdev keyboard"
[   228.355] (**) AT keyboard: Applying InputClass "libinput keyboard catchall"
[   228.355] (II) Using input driver 'libinput' for 'AT keyboard'
[   228.355] (**) AT keyboard: always reports core events
[   228.355] (**) Option "Device" "/dev/input/event3"
[   228.355] (**) Option "_source" "server/udev"
[   228.356] (II) event3  - AT keyboard: is tagged by udev as: Keyboard
[   228.356] (II) event3  - AT keyboard: device is a keyboard
[   228.356] (II) event3  - AT keyboard: device removed
[   228.356] (**) Option "config_info" "udev:/dev/input/event3"
[   228.356] (II) XINPUT: Adding extended input device "AT keyboard" (type: KEYBOARD, id 9)
[   228.356] (**) Option "xkb_rules" "evdev"
[   228.356] (II) event3  - AT keyboard: is tagged by udev as: Keyboard
[   228.356] (II) event3  - AT keyboard: device is a keyboard
[   228.356] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event4)
[   228.356] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[   228.357] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[   228.357] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[   228.357] (**) Logitech USB Optical Mouse: always reports core events
[   228.357] (**) Option "Device" "/dev/input/event4"
[   228.357] (**) Option "_source" "server/udev"
[   228.357] (II) event4  - Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 1: is tagged by udev as: Mouse
[   228.357] (II) event4  - Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 1: device is a pointer
[   228.357] (II) event4  - Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 1: device removed
[   228.357] (**) Option "config_info" "udev:/dev/input/event4"
[   228.357] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)
[   228.357] (**) Option "AccelerationScheme" "none"
[   228.357] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[   228.357] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[   228.357] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[   228.358] (II) event4  - Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 1: is tagged by udev as: Mouse
[   228.358] (II) event4  - Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 1: device is a pointer
[   231.537] (II) modeset(0): Disabling kernel dirty updates, not required.
[   529.251] (II) modeset(0): EDID vendor "DEL", prod id 53271
[   529.251] (II) modeset(0): Using EDID range info for horizontal sync
[   529.251] (II) modeset(0): Using EDID range info for vertical refresh
[   529.251] (II) modeset(0): Printing DDC gathered Modelines:
[   529.251] (II) modeset(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz eP)
[   529.251] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   529.251] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   529.251] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   529.251] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   529.251] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   529.251] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   529.251] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   529.251] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   529.251] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   529.251] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   529.325] (II) modeset(0): EDID vendor "DEL", prod id 53271
[   529.325] (II) modeset(0): Using hsync ranges from config file
[   529.325] (II) modeset(0): Using vrefresh ranges from config file
[   529.325] (II) modeset(0): Printing DDC gathered Modelines:
[   529.325] (II) modeset(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz eP)
[   529.325] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   529.325] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   529.325] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   529.325] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   529.325] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   529.325] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   529.325] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   529.325] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   529.325] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   529.325] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
pinux
() автор топика
Ответ на: комментарий от pinux

geom_eli_load=«YES»

Оно тоже предлагает ввести пароль, если rootfs находится в GELI-контейнере.

kld_list=«/boot/modules/radeonkms.ko»

Твоя видеокарта умеет в amdgpu? Не знаю в чём проблема, но у меня на R7 265X с radeonkms тоже видео 3.14-дорасит с какого-то момента времени (≈11.x, до этого не юзал FreeBSD на десктопе).

Есть подозрение, что у тебя проблемы с EDID (в Linux для этого есть костыли, FreeBSD полагается на него полностью), но я не особо в теме, чтобы что-то рекомендовать по этому поводу.

EDID vendor «DEL», prod id 53271

Или нет.

mord0d ★★★★★
()
Последнее исправление: mord0d (всего исправлений: 1)
Ответ на: комментарий от mord0d

Оно тоже предлагает ввести пароль, если rootfs находится в GELI-контейнере.

Оно просит пароль до загрузки системы.

Не знаю в чём проблема, но у меня на R7 265X с radeonkms тоже видео 3.14-дорасит

Видимо, это говно только на радеонах. Сейчас попробую amdgpu

pinux
() автор топика
Ответ на: комментарий от mord0d

Твоя видеокарта умеет в amdgpu?

Не может видеокарта работать в amdgpu, к сожалению. Такая вот задница она.

pinux
() автор топика
Ответ на: комментарий от pinux

Установил freebsd на другой комп вообще без видеокарты, amd-athlon, ddr3(6Gb)озу. Тоже Plasma x11 стала.

А на древнем интеле всё тоже самое делаю и нет x11. Как так?

pinux
() автор топика
Ответ на: комментарий от anonymous

Спасибо. Помнил же, что такое есть, но забыл название

pinux
() автор топика

но зато x11, которого небыло раньше, работает. Что я пропустил? Мне не нравится смотреть на оконную систему x11, хочу вернуть как было.

а как было? до вяленого кроме х11 что-то было?
или ты кеды патчил что бы они через libastral отрисовывали?

А на древнем интеле всё тоже самое делаю и нет x11. Как так?

а посмотри на нём что в переменной $XDG_SESSION_TYPE прописано, случаем не х11?

Minona ★★☆
()

ТС у тебя при выборе Plasma(x11) голые иксы запускаются или что тебе не нравится?

У меня плазма под иксами запускается, но я никогда не обращал внимание как называется сессия при входе.

Wens ★
()
Ответ на: комментарий от Minona

Я не делал ничего. Раньше было просто Plasma, а теперь выбор Plasma(x11). И теперь как будто совсем другое окружение.

Дома буду, посмотрю.

pinux
() автор топика
Ответ на: комментарий от Wens

Мне не нравится, что Plasma(x11), а не привычная Plasma, как раньше. Разница в том, что версия KDE Plasma, Qt и Frameworks другая.

pinux
() автор топика
Ответ на: комментарий от Minona

а посмотри на нём что в переменной $XDG_SESSION_TYPE прописано, случаем не х11?

Посмотрел. Везде, где ставил freebsd прописано x11

pinux
() автор топика
Ответ на: комментарий от pinux

Посмотрел. Везде, где ставил freebsd прописано x11
Мне не нравится, что Plasma(x11), а не привычная Plasma, как раньше

раньше был только х11
а теперь у тебя есть выбор - вяленый или х11.

Разница в том, что версия KDE Plasma, Qt и Frameworks другая

так они вроде бы каждый релиз что-то в темах меняют.
настрой как тебе надо.

Minona ★★☆
()
Ответ на: комментарий от Minona

Настроить можно только оформление и внешний вид рабочей среды Plasma. Пробовал и темы другие ставить и настраивал.

Меня печалит не убогий внешний вид, а нестабильность. Например, какой-то софт работает криво, а раньше работал нормально.

Я сравниваю info center тогда:

Операционная система: FreeBSD 13.0
Версия KDE Plasma: 5.20.5
Версия KDE Frameworks: 5.80.0
Версия Qt: 5.15.2
Версия ядра: 13.0-RELEASE
Архитектура: 64-битная
Память: 3,2 ГиБ ОЗУ
Графический процессор: Mesa DRI Intel®

сейчас:

Операционная система: FreeBSD 13.0
Версия KDE Plasma: 5.22.2
Версия KDE Frameworks: 5.82.0
Версия Qt: 5.15.2
Версия ядра: 13.0-RELEASE (64-бита)
Графическая платформа: X11
Память: 7,9 ГиБ ОЗУ
Графический процессор: AMD TURKS

Объясните, на каком моменте я провтыкал, на обновлении plasma5? Или из-за проца? Или может стоит релиз поставить 12? На интеле всё ок, может собрать свой образ с интела и установить на амд? У меня еще есть возможность установить на комп с geforce видеокартой. В какую сторону копать?

pinux
() автор топика
Ответ на: комментарий от pinux

кде-шники активно пилят поддержку wayland

На интеле всё ок, может собрать свой образ с интела и установить на амд?

попробуй.

Minona ★★☆
()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.
← Chrom browser - как увеличить фонт в адресной строке?
Desktop
винрар →