Здравствуйте. Стоит гента х86, сидюк HL-DT-ST DVDRAM GSA-H10N, подключён к IDE-шине. В ядре что-то не так наконфигурил и вот:
0.285544] Uniform Multi-Platform E-IDE driver
[ 0.285637] jmicron 0000:02:00.1: IDE controller (0x197b:0x2363 rev 0x02)
[ 0.285690] JMicron IDE 0000:02:00.1: enabling device (0000 -> 0001)
[ 0.285742] JMicron IDE 0000:02:00.1: PCI->APIC IRQ transform: INT B -> IRQ 16
[ 0.285808] jmicron 0000:02:00.1: 100% native mode on irq 16
[ 0.285860] JMicron IDE 0000:02:00.1: setting latency timer to 64
[ 0.285865] ide0: BM-DMA at 0xa400-0xa407
[ 0.285916] ide1: BM-DMA at 0xa408-0xa40f
[ 0.285963] Probing IDE interface ide0...
[ 0.670710] hda: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive
[ 0.993482] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 0.994217] hda: UDMA/33 mode selected
[ 0.994682] Probing IDE interface ide1...
[ 1.542114] ide0 at 0xac00-0xac07,0xa882 on irq 16
[ 1.542195] ide1 at 0xa800-0xa807,0xa482 on irq 16
[ 1.542342] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 1.542403] Probing IDE interface ide2...
[ 1.545406] ide2: no devices on the port
[ 1.545481] ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.545554] Probing IDE interface ide3...
[ 1.548550] ide3: no devices on the port
[ 1.548624] ide3 at 0x170-0x177,0x376 on irq 15
[ 1.548694] ide-gd driver 1.18
[ 1.548769] ide-cd driver 5.00
[ 8.618265] ide-atapi: cmd 0x5a timed out
[ 8.618310] hda: lost interrupt
[ 69.214293] ide-atapi: cmd 0x5a timed out
[ 69.214337] hda: lost interrupt
[ 69.214393] ide-cd: hda: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 69.214621] Uniform CD-ROM driver Revision: 3.20
[ 129.810305] hda: lost interrupt
[ 190.409697] ide-atapi: cmd 0x3 timed out
[ 190.409742] hda: lost interrupt
[ 251.005726] ide-atapi: cmd 0x3 timed out
[ 251.005770] hda: lost interrupt
[ 311.601754] hda: lost interrupt
[ 372.201138] ide-atapi: cmd 0x3 timed out
[ 372.201182] hda: lost interrupt
[ 432.797157] ide-atapi: cmd 0x3 timed out
[ 432.797201] hda: lost interrupt
[ 493.393179] hda: lost interrupt
[ 553.992563] ide-atapi: cmd 0x3 timed out
[ 553.992607] hda: lost interrupt
[ 614.588582] ide-atapi: cmd 0x3 timed out
[ 614.588600] hda: lost interrupt
В чём ошибка и как исправить?