boot.src (cmd):
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 init=/sbin/init rootfstype=ext4 rw rootwait panic=10
load mmc 0 0x43000000 sun5i-a13-olinuxino-micro.dtb
load mmc 0 0x42000000 uImage
bootm 0x42000000 – 0x43000000
При запуске в автомате выдает ошибку:
Found U-Boot script /boot.scr
295 bytes read in 2 ms (143.6 KiB/s)
## Executing script at 43100000
16148 bytes read in 3 ms (5.1 MiB/s)
4815792 bytes read in 206 ms (22.3 MiB/s)
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-4.14.281
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4815728 Bytes = 4.6 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Wrong Ramdisk Image Format
Ramdisk image is corrupt or invalid
SCRIPT FAILED: continuing...
16148 bytes read in 4 ms (3.8 MiB/s)
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
При запуске вручную # bootm 0x42000000 - 0x43000000, стартует нормально:
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-4.14.281
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4815728 Bytes = 4.6 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Kernel Image
Loading Device Tree to 49ff9000, end 49ffff13 ... OK
Starting kernel ...
Может кто подскажет как запустить в автомате? Процессор A13. U-Boot 2022.07-rc3-00073-g4fe629d2e8-dirty
