Не получается при запуске стартовать два Х сервера. [ebuild R ~] x11-misc/lightdm-1.18.0::gentoo USE=«gtk introspection qt5 -audit -gnome -kde -qt4» 0 KiB
[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.18.1, UID=0 PID=2668
[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.01s] DEBUG: Registered seat module xlocal
[+0.01s] DEBUG: Registered seat module xremote
[+0.01s] DEBUG: Registered seat module unity
[+0.04s] WARNING: Failed to get list of logind seats: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.fre$
[+0.04s] DEBUG: Adding default seat
[+0.04s] DEBUG: Seat seat0: Loading properties from config section Seat:*
[+0.04s] DEBUG: Seat seat0: Starting
[+0.04s] DEBUG: Seat seat0: Creating user session
[+0.59s] DEBUG: Loading users from org.freedesktop.Accounts
[+0.59s] DEBUG: User /org/freedesktop/Accounts/User1000 added
[+0.59s] DEBUG: Seat seat0: Creating display server of type x
[+0.59s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory)
[+0.59s] DEBUG: Using VT 7
[+0.59s] DEBUG: Seat seat0: Starting local X display on VT 7
[+0.59s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log
[+0.59s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0
[+0.59s] DEBUG: DisplayServer x-0: Launching X Server
[+0.59s] DEBUG: Launching process 2708: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.59s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0
[+0.59s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.60s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+1.67s] DEBUG: Got signal 10 from process 2708
[+1.67s] DEBUG: DisplayServer x-0: Got signal from X server :0
[+1.67s] DEBUG: DisplayServer x-0: Connecting to XServer :0
[+1.67s] DEBUG: Seat seat0: Display server ready, starting session authentication
[+1.67s] DEBUG: Session pid=2757: Started with service 'lightdm-autologin', username 'user'
[+1.68s] DEBUG: Session pid=2757: Authentication complete with return value 0: Success
[+1.68s] DEBUG: Seat seat0: Session authenticated, running command
[+1.68s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0
[+1.68s] DEBUG: Session pid=2757: Running command /etc/lightdm/Xsession /usr/bin/startlxde
[+1.68s] DEBUG: Creating shared data directory /var/lib/lightdm-data/user
[+1.68s] DEBUG: Session pid=2757: Logging to .xsession-errors
[+1.76s] DEBUG: Activating VT 7
[+1.76s] DEBUG: Activating ConsoleKit session Gentoo-1461249461.84418-312797342
[+1.76s] WARNING: Error activating ConsoleKit session: GDBus.Error:org.freedesktop.ConsoleKit.Session.Error.AlreadyActive: Se$
# General configuration
#
# start-default-seat = True to always start one seat if none are defined in the configuration
# greeter-user = User to run greeter as
# minimum-display-number = Minimum display number to use for X servers
# minimum-vt = First VT to run displays on
# lock-memory = True to prevent memory from being paged to disk
# user-authority-in-system-dir = True if session authority should be in the system location
# guest-account-script = Script to be run to setup guest account
# logind-load-seats = True to automatically set up multi-seat configuration from logind
# logind-check-graphical = True to on start seats that are marked as graphical by logind
# log-directory = Directory to log information to
# run-directory = Directory to put running state in
# cache-directory = Directory to cache to
# sessions-directory = Directory to find sessions
# remote-sessions-directory = Directory to find remote sessions
# greeters-directory = Directory to find greeters
#
[LightDM]
#start-default-seat=true
#greeter-user=lightdm
minimum-display-number=0
minimum-vt=7
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
#logind-load-seats=false
#logind-check-graphical=false
#log-directory=/var/log/lightdm
#run-directory=/var/run/lightdm
#cache-directory=/var/cache/lightdm
#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#greeters-directory=/usr/share/lightdm/greeters:/usr/share/xgreeters
#
# Seat defaults
#
# type = Seat type (xlocal, xremote)
# xdg-seat = Seat name to set pam_systemd XDG_SEAT variable and name to pass to X server
# pam-service = PAM service to use for login
# pam-autologin-service = PAM service to use for autologin
# pam-greeter-service = PAM service to use for greeters
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
# xserver-layout = Layout to pass to X server
# xserver-config = Config file to pass to X server
# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
# xserver-share = True if the X server is shared for both greeter and session
# xserver-hostname = Hostname of X server (only for type=xremote)
# xserver-display-number = Display number of X server (only for type=xremote)
# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
# xdmcp-port = XDMCP UDP/IP port to communicate on
# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
# unity-compositor-command = Unity compositor command to run (can also contain arguments e.g. unity-system-compositor -special-option)
# unity-compositor-timeout = Number of seconds to wait for compositor to start
# greeter-session = Session to load for greeter
# greeter-hide-users = True to hide the user list
# greeter-allow-guest = True if the greeter should show a guest login option
# greeter-show-manual-login = True if the greeter should offer a manual login option
# greeter-show-remote-login = True if the greeter should offer a remote login option
# user-session = Session to load for users
# allow-user-switching = True if allowed to switch users
# allow-guest = True if guest login is allowed
# guest-session = Session to load for guests (overrides user-session)
session-wrapper=/etc/lightdm/Xsession
# greeter-wrapper = Wrapper script to run greeter with
# guest-wrapper = Wrapper script to run guest sessions with
# display-setup-script = Script to run when starting a greeter session (runs as root)
# display-stopped-script = Script to run after stopping the display server (runs as root)
# greeter-setup-script = Script to run when starting a greeter (runs as root)
# session-setup-script = Script to run when starting a user session (runs as root)
# session-cleanup-script = Script to run when quitting a user session (runs as root)
# autologin-guest = True to log in as guest by default
# autologin-user = User to log in with by default (overrides autologin-guest)
# autologin-user-timeout = Number of seconds to wait before loading default user
# autologin-session = Session to load for automatic login (overrides user-session)
# autologin-in-background = True if autologin session should not be immediately activated
# exit-on-failure = True if the daemon should exit if this seat fails
#
[Seat:*]
#type=xlocal
#xdg-seat=seat0
#pam-service=lightdm
#pam-autologin-service=lightdm-autologin
#pam-greeter-service=lightdm-greeter
#xserver-command=X
#xserver-layout=
#xserver-config=
#xserver-allow-tcp=false
#xserver-share=true
#xserver-hostname=
#xserver-display-number=
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
#unity-compositor-command=unity-system-compositor
#unity-compositor-timeout=60
#greeter-session=example-gtk-gnome
#greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
#user-session=default
#allow-user-switching=true
#allow-guest=true
#guest-session=
session-wrapper=/etc/lightdm/Xsession
#greeter-wrapper=
#guest-wrapper=
#display-setup-script=
#display-stopped-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
autologin-user=user
autologin-user-timeout=0
#autologin-in-background=false
#autologin-session=UNIMPLEMENTED
#exit-on-failure=false
#
# Seat configuration
#
# Each seat must start with "Seat:".
# Uses settings from [SeatDefaults], any of these can be overriden by setting them in this section.
#
[Seat:0]
xserver-command=/usr/bin/X :0 vt7 -nolisten tcp
[Seat:1]
xserver-command=/usr/bin/X :1 vt8 -nolisten tcp
#[Seat:2]
#xserver-command=/usr/bin/X :2 vt9 -nolisten tcp
#
# XDMCP Server configuration
#
# enabled = True if XDMCP connections should be allowed
# port = UDP/IP port to listen for connections on
# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
#
# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn. Alternatively
# it can be a word and the first 7 characters are used as the key.
#
[XDMCPServer]
#enabled=false
#port=177
#key=
#
# VNC Server configuration
#
# enabled = True if VNC connections should be allowed
# command = Command to run Xvnc server with
# port = TCP/IP port to listen for connections on
# width = Width of display to use
# height = Height of display to use
# depth = Color depth of display to use
#
[VNCServer]
#enabled=false
#command=Xvnc
#port=5900
#width=1024
#height=768
#depth=8
В чем может быть причина и как исправить?
