K3b и SCSI CD-RW

Вывод lsmod и dmesg ?

# lsmod
...
sg 28832 0
sr_mod 12068 0
cdrom 31200 1 sr_mod
...

# less /var/log/dmesg
...
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 29160 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

Vendor: SEAGATE Model: ST373207LW Rev: 0003
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
target0:0:0: Beginning Domain Validation
target0:0:0: wide asynchronous.
target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
target0:0:0: Ending Domain Validation
Vendor: FUJITSU Model: M2513A Rev: 1300
Type: Optical Device ANSI SCSI revision: 02
target0:0:5: Beginning Domain Validation
target0:0:5: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 10)
target0:0:5: Domain Validation skipping write tests
target0:0:5: Ending Domain Validation
Vendor: HP Model: CD-Writer+ 9200 Rev: 1.0e
Type: CD-ROM ANSI SCSI revision: 04
target0:0:6: Beginning Domain Validation
target0:0:6: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
target0:0:6: Domain Validation skipping write tests
target0:0:6: Ending Domain Validation
SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:5:0: Attached scsi removable disk sdb
...
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:6:0: Attached scsi CD-ROM sr0
...

ls /dev/cdrom -> sr0 ?
Может быть ls -l /dev/cdrom --> /dev/sr0

Нет, как написАл, так и есть. Т.е. cdrom -> sr0 внутри каталога dev.

А cdrecord --scanbus, что говорит?

$ cdrecord --scanbus
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J&#65533;g Schilling
cdrecord: Warning: Running on Linux-2.6.15
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
Linux sg driver version: 3.5.33
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'SEAGATE ' 'ST373207LW ' '0003' Disk
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) 'FUJITSU ' 'M2513A ' '1300' Removable Optical Storage
0,6,0 6) 'HP ' 'CD-Writer+ 9200 ' '1.0e' Removable CD-ROM
0,7,0 7) *

cdrecord -inq dev=0,6,0 ?

]$ cdrecord -inq dev=0,6,0
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J&#65533;g Schilling
cdrecord: Warning: Running on Linux-2.6.15
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '0,6,0'
scsibus: 0 target: 6 lun: 0
Linux sg driver version: 3.5.33
Using libscg version 'schily-0.8'.
Device type : Removable CD-ROM
Version : 4
Response Format: 2
Capabilities : SYNC
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 9200 '
Revision : '1.0e'
Device seems to be: Generic mmc CD-RW.