Всем доброго времени суток! Заранее прошу прощение, я в люнексе не очень силен... Ситуация такая: есть Orange PI PC с установленным arambian и подключенным оборудованием на прямую по USB. В течение времени tps (в iostat) падает, но обычно не доходит до нуля (держится в районе 0.2) но когда подключаю оборудование через USB HUB то tps падет до 0 после чего выводиться сообщение об ошибке и все повисает... Подскажите, пожалуйста, как с этим можно справиться? Уже не один день бьюсь над этим и не чего не могу придумать....
Message from syslogd@localhost at Nov 24 14:07:59 ...
kernel:[ 417.381358] sunxi oops: enable sdcard JTAG interface
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] sunxi oops: cpu frequency: 480 MHz
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] sunxi oops: ddr frequency: 624 MHz
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] sunxi oops: gpu frequency: 105 MHz
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] sunxi oops: cpu temperature: 20
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] Process miner/1 (pid: 1600, stack limit = 0xee4122f8)
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] Stack: (0xee413d48 to 0xee414000)
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3d40: eea92c00 ee413dc0 00000081 ee413d60 c06913b8 c047cd40
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3d60: ee413d8c eea19140 eea92c00 00000000 ee413dc0 eea92d10 600f0093 00000081
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3d80: ee413dfc ee413d90 c04918ac c048e794 eeb89684 ee413da0 c001a5f8 c001a034
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3da0: c001e38c c0a5de3c eea19140 c001a5b8 ee413dfc ee413dc0 00000020 eea92d00
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3dc0: d090d278 d090d278 c0077720 c0690058 ee580ad4 eea19140 eea92c00 00000000
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3de0: eea19148 00000020 004b1ac8 00000001 ee413e3c ee413e00 c047e9bc c04917cc
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3e00: ee413e3c ee413e10 c005db54 c047f344 00000000 c005ef30 00000200 ee484940
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3e20: ee484950 ee484950 00000000 004b1ac8 ee413e64 ee413e40 c047f710 c047e4a4
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3e40: ee5dc680 ee484940 ee484950 ee484950 00000000 004b1ac8 ee413efc ee413e68
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3e60: c048901c c047f4ac 00000000 00000000 00000000 00000040 00000000 00000000
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3e80: 00000000 eeb1249c ee48f070 ee412000 eeb8966c 00000001 0000009e c000e1c8
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3ea0: ed851ca8 00008103 00000000 00000000 afefe508 00000040 00000000 00000000
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3ec0: 00000000 00000000 00000000 004b0fd0 c068fdfc 004b1ac8 ee48f070 ee378c80
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3ee0: 004b1ac8 c000e1c8 ee412000 00000000 ee413f0c ee413f00 c012d80c c0487dfc
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3f00: ee413f7c ee413f10 c012e2d0 c012d7e0 c006dfc0 c0014ad0 ffffffff 00ffffff
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3f20: 5f830936 c006de0c ee413f64 ee413f38 c006de0c c0014ad0 5fa5856d 00000002
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3f40: ee413f88 c011f87c ee378c80 0000000b ee413f7c ee413f60 0000000b ee378c80
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3f60: 802c550a 004b1ac8 c000e1c8 ee412000 ee413fa4 ee413f80 c012e3bc c012de14
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3f80: 00000000 00000001 004b1ac8 00000000 004b0fd0 00000036 00000000 ee413fa8
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3fa0: c000df60 c012e380 004b1ac8 00000000 0000000b 802c550a 004b1ac8 0048bc00
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3fc0: 004b1ac8 00000000 004b0fd0 00000036 00000000 00004000 00000001 00000000
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] 3fe0: 000692d8 afefe1e4 00047813 b6d79206 600f0030 0000000b 00000000 00000000
Message from syslogd@localhost at Nov 24 14:08:01 ...
kernel:[ 417.390251] Code: e1a01004 e5958014 e3a02060 e1a00008 (e598a034)
Message from syslogd@localhost at Nov 24 14:08:24 ...
kernel:[ 442.601006] BUG: soft lockup - CPU#2 stuck for 21s! [kworker/2:1:2358]
iostat
Linux 3.4.112-sun8i (orangepipc) 11/24/2016 _armv7l_ (4 CPU)
avg-cpu: %user %nice %system %iowait %steal %idle
1.32 0.00 2.55 0.18 0.00 95.95
Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn
mmcblk0 2.36 119.34 3.77 196569 6216
lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 006: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 003 Device 005: ID 0483:5740 STMicroelectronics STM32F407
Bus 003 Device 004: ID 0483:5740 STMicroelectronics STM32F407
Bus 003 Device 003: ID 0483:5740 STMicroelectronics STM32F407
Bus 003 Device 002: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
dmesg
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.112-sun8i (root@xenial) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #10 SMP PREEMPT Sun Oct 23 16:06:55 CEST 2016
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun8i
[ 0.000000] cma: CMA: reserved 256 MiB at 50000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0a22a00, node_mem_map c0b5c000
[ 0.000000] Normal zone: 1710 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 192850 pages, LIFO batch:31
[ 0.000000] HighMem zone: 594 pages used for memmap
[ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
[ 0.000000] script_init enter!
[ 0.000000] script_init exit!
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1472000 s11968 r8192 d12608 u32768
[ 0.000000] pcpu-alloc: s11968 r8192 d12608 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
[ 0.000000] Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 cgroup_enable=memory swapaccount=1 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 panic=10 consoleblank=0 enforcing=0 loglevel=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 758708k/758708k available, 289868k reserved, 270336K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc095ad38 (9548 kB)
[ 0.000000] .init : 0xc095b000 - 0xc09adec0 ( 332 kB)
[ 0.000000] .data : 0xc09ae000 - 0xc0a27850 ( 487 kB)
[ 0.000000] .bss : 0xc0a28004 - 0xc0b5b090 (1229 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:544
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.000266] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
[ 0.000290] pid_max: default: 32768 minimum: 301
[ 0.000627] Mount-cache hash table entries: 512
[ 0.001584] Initializing cgroup subsys cpuacct
[ 0.001599] Initializing cgroup subsys memory
[ 0.001646] Initializing cgroup subsys devices
[ 0.001657] Initializing cgroup subsys freezer
[ 0.001668] Initializing cgroup subsys blkio
[ 0.001692] Initializing cgroup subsys perf_event
[ 0.001772] CPU: Testing write buffer coherency: ok
[ 0.001814] ftrace: allocating 25741 entries in 76 pages
[ 0.030293] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.030311] [sunxi_smp_prepare_cpus] enter
[ 0.030348] Setting up static identity map for 0x40691778 - 0x406917d0
[ 0.031297] CPU1: Booted secondary processor
[ 0.031297] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.031430] CPU2: Booted secondary processor
[ 0.031430] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.040482] CPU3: Booted secondary processor
[ 0.040482] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.040601] Brought up 4 CPUs
[ 0.040601] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
[ 0.040900] devtmpfs: initialized
[ 0.050903] wakeup src cnt is : 2.
[ 0.050916] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
[ 0.050927] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0
[ 0.050937] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
[ 0.050949] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
[ 0.050959] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x8
[ 0.050969] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
[ 0.050981] sunxi pm init
[ 0.051118] pinctrl core: initialized pinctrl subsystem
[ 0.061166] NET: Registered protocol family 16
[ 0.062098] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.062098] script_sysfs_init success
[ 0.062098] sunxi_dump_init success
[ 0.062445] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[ 0.062445] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[ 0.062445] plat: add bmp085 device
[ 0.062445] plat: add pcf8591 device
[ 0.062445] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.062445] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.062445] script config pll_video to 297 Mhz
[ 0.062445] script config pll_de to 864 Mhz
[ 0.062445] script config pll_ve to 402 Mhz
[ 0.062445] sunxi_default_clk_init
[ 0.062445] try to set pll6ahb1 to 200000000
[ 0.062445] try to set ahb clk source to pll6ahb1
[ 0.062445] set ahb clk source to pll6ahb1
[ 0.062445] try to set ahb1 to 200000000
[ 0.062445] try to set apb1 to 100000000
[ 0.070238] bio: create slab <bio-0> at 0
[ 0.070309] [ARISC] :sunxi-arisc driver v1.04
[ 0.090812] [ARISC] :arisc version: [v0.1.58]
[ 0.181076] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
[ 0.182685] SCSI subsystem initialized
[ 0.182685] usbcore: registered new interface driver usbfs
[ 0.182685] usbcore: registered new interface driver hub
[ 0.182685] usbcore: registered new device driver usb
[ 0.182685] twi_chan_cfg()340 - [twi0] has no twi_regulator.
[ 0.182685] twi_chan_cfg()340 - [twi1] has no twi_regulator.
[ 0.182685] twi_chan_cfg()340 - [twi2] has no twi_regulator.
[ 0.182685] Linux video capture interface: v2.00
[ 0.182685] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.182685] cfg80211: Calling CRDA to update world regulatory domain
[ 0.182685] Switching to clocksource arch_sys_counter
[ 0.193957] FS-Cache: Loaded
[ 0.194241] CacheFiles: Loaded
[ 0.205409] NET: Registered protocol family 2
[ 0.216625] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.217235] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.218996] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.220089] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.220100] TCP: reno registered
[ 0.220115] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.220153] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.220513] NET: Registered protocol family 1
[ 0.220931] RPC: Registered named UNIX socket transport module.
[ 0.220943] RPC: Registered udp transport module.
[ 0.220952] RPC: Registered tcp transport module.
[ 0.220960] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.221151] Trying to unpack rootfs image as initramfs...
[ 0.407798] Freeing initrd memory: 3044K
[ 0.408341] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
[ 0.408467] sunxi_reg_init enter
[ 0.409384] audit: initializing netlink socket (disabled)
[ 0.409432] type=2000 audit(0.400:1): initialized
[ 0.410624] highmem bounce pool size: 64 pages
[ 0.411507] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.411688] misc fatfs initialized
[ 0.412406] NFS: Registering the id_resolver key type
[ 0.412796] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.412810] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.413581] NTFS driver 2.1.30 [Flags: R/W].
[ 0.413907] fuse init (API version 7.18)
[ 0.414621] Btrfs loaded
[ 0.414647] msgmni has been set to 1471
[ 0.416055] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.416073] io scheduler noop registered
[ 0.416082] io scheduler deadline registered
[ 0.416148] io scheduler cfq registered (default)
[ 0.416564] [DISP]disp_module_init
[ 0.416857] cmdline,init_disp=
[ 0.416887] cmdline,disp=
[ 0.424695] [DISP] Fb_map_kernel_logo,line:932:Fb_map_kernel_logo failed!
[ 0.441169] Console: switching to colour frame buffer device 160x45
[ 0.458490] [DISP]disp_module_init finish
[ 0.458715] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
[ 0.459029] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[ 0.459042] sw_uart_pm()890 - uart0 clk is already enable
[ 0.459061] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
[ 0.459494] console [ttyS0] enabled
[ 0.460060] sunxi_cmatest_init enter
[ 0.460107] sunxi_cmatest_init success
[ 0.464222] brd: module loaded
[ 0.468131] loop: module loaded
[ 0.468414] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator.
[ 0.468428] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator.
[ 0.469023] spi spi0: master is unqueued, this is deprecated
[ 0.469329] tun: Universal TUN/TAP device driver, 1.6
[ 0.469339] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.470319] PPP generic driver version 2.4.2
[ 0.470527] PPP BSD Compression module registered
[ 0.470537] PPP Deflate Compression module registered
[ 0.473306] PPP MPPE Compression module registered
[ 0.473323] NET: Registered protocol family 24
[ 0.473401] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.493504] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.493538] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[ 0.494115] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[ 0.510037] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[ 0.510660] hub 1-0:1.0: USB hub found
[ 0.510685] hub 1-0:1.0: 1 port detected
[ 0.531056] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.531085] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
[ 0.531479] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
[ 0.550036] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
[ 0.550053] ehci_irq: highspeed device connect
[ 0.550575] hub 2-0:1.0: USB hub found
[ 0.550603] hub 2-0:1.0: 1 port detected
[ 0.570968] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.570996] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3
[ 0.571387] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000
[ 0.590032] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00
[ 0.590046] ehci_irq: highspeed device connect
[ 0.590565] hub 3-0:1.0: USB hub found
[ 0.590589] hub 3-0:1.0: 1 port detected
[ 0.610960] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.610989] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4
[ 0.611375] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000
[ 0.630029] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00
[ 0.630045] ehci_irq: highspeed device connect
[ 0.630572] hub 4-0:1.0: USB hub found
[ 0.630595] hub 4-0:1.0: 1 port detected
[ 0.630970] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.651059] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 0.651087] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5
[ 0.651120] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
[ 0.714547] hub 5-0:1.0: USB hub found
[ 0.714568] hub 5-0:1.0: 1 port detected
[ 0.734935] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 0.734963] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6
[ 0.734996] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400
[ 0.794596] hub 6-0:1.0: USB hub found
[ 0.794616] hub 6-0:1.0: 1 port detected
[ 0.810053] ehci_irq: highspeed device disconnect
[ 0.810075] ohci_irq: fullspeed or lowspeed device connect
[ 0.814991] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 0.815019] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7
[ 0.815062] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400
[ 0.874576] hub 7-0:1.0: USB hub found
[ 0.874596] hub 7-0:1.0: 1 port detected
[ 0.894960] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 0.894989] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8
[ 0.895021] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400
[ 0.930039] ehci_irq: highspeed device disconnect
[ 0.930061] ohci_irq: fullspeed or lowspeed device connect
[ 0.954517] hub 8-0:1.0: USB hub found
[ 0.954536] hub 8-0:1.0: 1 port detected
[ 0.954871] Initializing USB Mass Storage driver...
[ 0.955102] usbcore: registered new interface driver usb-storage
[ 0.955114] USB Mass Storage support registered.
[ 0.955171] usbcore: registered new interface driver ums-alauda
[ 0.955219] usbcore: registered new interface driver ums-cypress
[ 0.955268] usbcore: registered new interface driver ums-datafab
[ 0.955315] usbcore: registered new interface driver ums_eneub6250
[ 0.955362] usbcore: registered new interface driver ums-freecom
[ 0.955417] usbcore: registered new interface driver ums-isd200
[ 0.955465] usbcore: registered new interface driver ums-jumpshot
[ 0.955511] usbcore: registered new interface driver ums-karma
[ 0.955557] usbcore: registered new interface driver ums-onetouch
[ 0.955617] usbcore: registered new interface driver ums-realtek
[ 0.955668] usbcore: registered new interface driver ums-sddr09
[ 0.955717] usbcore: registered new interface driver ums-sddr55
[ 0.955766] usbcore: registered new interface driver ums-usbat
[ 0.955976] uinput result 0 , vmouse_init
[ 0.956587] mousedev: PS/2 mouse device common for all mice
[ 0.956803] sunxikbd_init failed.
[ 0.957546] ls_fetch_sysconfig_para: type err device_used = -1073060220.
[ 0.957558] =========script_get_err============
[ 0.957566] ltr_init: ls_fetch_sysconfig_para err.
[ 0.958123] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[ 0.958174] i2c /dev entries driver
[ 0.958567] IR RC5(x) protocol handler initialized
[ 0.958691] sunxi cedar version 0.1
[ 0.958733] [cedar]: install start!!!
[ 0.958933] [cedar]: install end!!!
[ 0.959162] twi_start()434 - [i2c0] START can't sendout!
[ 0.959424] twi_start()434 - [i2c0] START can't sendout!
[ 0.959683] twi_start()434 - [i2c0] START can't sendout!
[ 0.959947] twi_start()434 - [i2c0] START can't sendout!
[ 0.960208] twi_start()434 - [i2c0] START can't sendout!
[ 0.960469] twi_start()434 - [i2c0] START can't sendout!
[ 0.960731] twi_start()434 - [i2c0] START can't sendout!
[ 0.960991] twi_start()434 - [i2c0] START can't sendout!
[ 0.961250] twi_start()434 - [i2c0] START can't sendout!
[ 0.961512] twi_start()434 - [i2c0] START can't sendout!
[ 0.961772] twi_start()434 - [i2c0] START can't sendout!
[ 0.962031] twi_start()434 - [i2c0] START can't sendout!
[ 0.962293] twi_start()434 - [i2c0] START can't sendout!
[ 0.962553] twi_start()434 - [i2c0] START can't sendout!
[ 0.962812] twi_start()434 - [i2c0] START can't sendout!
[ 0.963074] twi_start()434 - [i2c0] START can't sendout!
[ 0.963334] twi_start()434 - [i2c0] START can't sendout!
[ 0.963593] twi_start()434 - [i2c0] START can't sendout!
[ 0.963855] twi_start()434 - [i2c0] START can't sendout!
[ 0.964114] twi_start()434 - [i2c0] START can't sendout!
[ 0.964374] twi_start()434 - [i2c0] START can't sendout!
[ 0.964635] twi_start()434 - [i2c0] START can't sendout!
[ 0.964895] twi_start()434 - [i2c0] START can't sendout!
[ 0.965154] twi_start()434 - [i2c0] START can't sendout!
[ 0.965416] twi_start()434 - [i2c0] START can't sendout!
[ 0.965676] twi_start()434 - [i2c0] START can't sendout!
[ 0.965935] twi_start()434 - [i2c0] START can't sendout!
[ 0.966235] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x18)
[ 0.966429] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x19)
[ 0.966620] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x1a)
[ 0.966811] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29)
[ 0.967002] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2a)
[ 0.967192] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2b)
[ 0.967383] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c)
[ 0.967574] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4d)
[ 0.967765] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4e)
[ 0.967780] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
[ 0.967944] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
[ 0.968100] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
[ 0.968113] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
[ 0.968124] timeout_to_interv, line 167
[ 0.968131] interv_to_timeout, line 189
[ 0.968141] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
[ 0.968587] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.968802] calibrat: max_cpufreq 1200Mhz Type 0!
[ 0.969110] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.111 2015-4-13 15:24) Compiled in Oct 23 2016 at 16:04:43
[ 0.969143] [mmc]: get mmc0's sdc_power is null!
[ 0.969170] [mmc]: get mmc1's sdc_power is null!
[ 0.969179] [mmc]: get mmc1's 2xmode ok, val = 1
[ 0.969189] [mmc]: get mmc1's ddrmode ok, val = 1
[ 0.969205] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2
[ 0.972849] [mmc]: sdc0 power_supply is null
[ 0.974709] no blue_led, ignore it!
[ 0.974949] Registered led device: red_led
[ 0.975068] Registered led device: green_led
[ 0.975084] no led_0, ignore it!
[ 0.975092] no led_1, ignore it!
[ 0.975099] no led_2, ignore it!
[ 0.975106] no led_3, ignore it!
[ 0.975113] no led_4, ignore it!
[ 0.975120] no led_5, ignore it!
[ 0.975127] no led_6, ignore it!
[ 0.975134] no led_7, ignore it!
[ 0.975950] usbcore: registered new interface driver usbhid
[ 0.975961] usbhid: USB HID core driver
[ 0.980301] asoc: sndcodec <-> sunxi-codec mapping ok
[ 0.981149] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly!
[ 0.981337] [I2S]snddaudio cannot find any using configuration for controllers, return directly!
[ 0.981352] [DAUDIO0] driver not init,just return.
[ 0.984752] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
[ 0.985802] oprofile: using arm/armv7-ca7
[ 0.985995] u32 classifier
[ 0.986004] Performance counters on
[ 0.986011] input device check on
[ 0.986018] Actions configured
[ 0.986203] IPv4 over IPv4 tunneling driver
[ 0.986833] TCP: bic registered
[ 0.986845] TCP: cubic registered
[ 0.986853] TCP: westwood registered
[ 0.986860] TCP: highspeed registered
[ 0.986868] TCP: hybla registered
[ 0.986875] TCP: htcp registered
[ 0.986882] TCP: vegas registered
[ 0.986890] TCP: veno registered
[ 0.986897] TCP: scalable registered
[ 0.986905] TCP: lp registered
[ 0.986912] TCP: yeah registered
[ 0.986919] TCP: illinois registered
[ 0.986927] Initializing XFRM netlink socket
[ 0.987158] NET: Registered protocol family 10
[ 0.988316] NET: Registered protocol family 17
[ 0.988348] NET: Registered protocol family 15
[ 0.988392] Registering the dns_resolver key type
[ 0.988862] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.988884] ThumbEE CPU extension supported.
[ 0.988906] Registering SWP/SWPB emulation handler
[ 0.989435] registered taskstats version 1
[ 0.989877] cmdline,disp=
[ 0.990276] [HDMI] power vcc-hdmi-18
[ 1.021040] ths_fetch_sysconfig_para: type err device_used = 1.
[ 1.022340] CPU Budget:corekeeper enabled
[ 1.022568] CPU Budget:Register notifier
[ 1.022581] CPU Budget:register Success
[ 1.022594] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
[ 1.025813] [rf_pm]: module power0 name vcc-wifi-33
[ 1.025830] [rf_pm]: Did not config module_power1 in sys_config
[ 1.025840] [rf_pm]: Did not config module_power2 in sys_config
[ 1.025850] [rf_pm]: Did not config module_power3 in sys_config
[ 1.025859] [rf_pm]: mod has no chip_en gpio
[ 1.025868] [rf_pm]: failed to fetch lpo_use_apclk
[ 1.025875] [rf_pm]: regulator on.
[ 1.025885] [wifi_pm]: no wifi used in configuration
[ 1.025895] [rfkill]: init no bt used in configuration
[ 1.025903] ALSA device list:
[ 1.025910] #0: audiocodec
[ 1.025917] #1: sndhdmi
[ 1.026812] Freeing init memory: 328K
[ 1.053879] mmc0: new high speed SDHC card at address 59b4
[ 1.054488] mmcblk0: mmc0:59b4 USDU1 14.7 GiB
[ 1.056167] mmcblk0: p1
[ 1.056768] mmcblk mmc0:59b4: Card claimed for testing.
[ 1.056782] mmc0:59b4: USDU1 14.7 GiB
[ 1.060095] ehci_irq: highspeed device disconnect
[ 1.060138] ohci_irq: fullspeed or lowspeed device connect
[ 1.071238] systemd-udevd[97]: starting version 215
[ 1.300107] usb 6-1: new full-speed USB device number 2 using sunxi-ohci
[ 1.630049] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=5
[ 1.870089] usb 8-1: new full-speed USB device number 2 using sunxi-ohci
[ 2.280083] usb 7-1: new full-speed USB device number 2 using sunxi-ohci
[ 2.822831] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
[ 4.050351] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 4.050684] systemd[1]: Detected architecture 'arm'.
[ 4.064382] systemd[1]: Set hostname to <orangepipc>.
[ 4.537806] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.540606] systemd[1]: Expecting device dev-ttyS0.device...
[ 4.541360] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.541588] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.541659] systemd[1]: Starting Remote File Systems (Pre).
[ 4.542058] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.542176] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.542369] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.542429] systemd[1]: Starting Paths.
[ 4.542755] systemd[1]: Reached target Paths.
[ 4.542875] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.543801] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.543887] systemd[1]: Starting Encrypted Volumes.
[ 4.544242] systemd[1]: Reached target Encrypted Volumes.
[ 4.544317] systemd[1]: Starting Root Slice.
[ 4.544726] systemd[1]: Created slice Root Slice.
[ 4.544789] systemd[1]: Starting User and Session Slice.
[ 4.545277] systemd[1]: Created slice User and Session Slice.
[ 4.545339] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.545908] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.545971] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.546411] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.546475] systemd[1]: Starting Journal Socket (/dev/log).
[ 4.546949] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.547034] systemd[1]: Starting udev Control Socket.
[ 4.547439] systemd[1]: Listening on udev Control Socket.
[ 4.547521] systemd[1]: Starting udev Kernel Socket.
[ 4.547919] systemd[1]: Listening on udev Kernel Socket.
[ 4.548007] systemd[1]: Starting Journal Socket.
[ 4.548445] systemd[1]: Listening on Journal Socket.
[ 4.548565] systemd[1]: Starting System Slice.
[ 4.549049] systemd[1]: Created slice System Slice.
[ 4.549146] systemd[1]: Started File System Check on Root Device.
[ 4.549200] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 4.549786] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 4.549848] systemd[1]: Starting system-getty.slice.
[ 4.550416] systemd[1]: Created slice system-getty.slice.
[ 4.550551] systemd[1]: Starting Increase datagram queue length...
[ 4.650857] systemd[1]: Starting Restore / save the current clock...
[ 4.740875] systemd[1]: Starting udev Coldplug all Devices...
[ 4.810907] systemd[1]: Mounted Huge Pages File System.
[ 4.811369] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.880947] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.924354] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.924796] systemd[1]: Mounting Debug File System...
[ 4.994051] systemd[1]: Starting Load Kernel Modules...
[ 5.070841] systemd[1]: Starting LSB: Set keymap...
[ 5.180755] systemd[1]: Starting Slices.
[ 5.181298] systemd[1]: Reached target Slices.
[ 5.183992] systemd[1]: Mounted Debug File System.
[ 5.184872] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.202757] [mmc]: sdc1 power_supply is null
[ 5.255201] [mmc]: sdc1 power_supply is null
[ 5.259314] [mmc]: sdc1 power_supply is null
[ 5.301207] [wifi_pm]: set wl_reg_on 1 !
[ 5.310680] systemd[1]: Started Increase datagram queue length.
[ 5.318637] [mmc]: sdc1 power_supply is null
[ 5.322655] [mmc]: sdc1 power_supply is null
[ 5.385257] [mmc]: sdc1 power_supply is null
[ 5.389367] [mmc]: sdc1 power_supply is null
[ 5.425008] systemd[1]: Started Restore / save the current clock.
[ 5.462012] [mmc]: sdc1 power_supply is null
[ 5.565314] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.705116] systemd[1]: Started Load Kernel Modules.
[ 5.754884] systemd[1]: Started LSB: Set keymap.
[ 5.804805] systemd[1]: Started udev Coldplug all Devices.
[ 5.806857] systemd[1]: Time has been changed
[ 5.807453] systemd[1]: Mounted Configuration File System.
[ 5.807556] systemd[1]: Mounting FUSE Control File System...
[ 5.890521] systemd[1]: Starting Apply Kernel Variables...
[ 5.971062] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 6.050814] systemd[1]: Starting Syslog Socket.
[ 6.055688] systemd[1]: Listening on Syslog Socket.
[ 6.055828] systemd[1]: Starting Journal Service...
[ 6.135592] systemd[1]: Started Journal Service.
[ 6.526678] systemd-udevd[179]: starting version 215
[ 6.734257] twi_start()434 - [i2c0] START can't sendout!
[ 6.734534] twi_start()434 - [i2c0] START can't sendout!
[ 6.734804] twi_start()434 - [i2c0] START can't sendout!
[ 6.735076] twi_start()434 - [i2c0] START can't sendout!
[ 6.735344] twi_start()434 - [i2c0] START can't sendout!
[ 6.735611] twi_start()434 - [i2c0] START can't sendout!
[ 6.754139] twi_start()434 - [i2c0] START can't sendout!
[ 6.754410] twi_start()434 - [i2c0] START can't sendout!
[ 6.754671] twi_start()434 - [i2c0] START can't sendout!
[ 6.754797] bmp085: probe of 0-0077 failed with error -121
[ 6.842020] cdc_acm 6-1:1.0: This device cannot do calls on its own. It is not a modem.
[ 6.863312] cdc_acm 6-1:1.0: ttyACM0: USB ACM device
[ 6.867671] cdc_acm 8-1:1.0: This device cannot do calls on its own. It is not a modem.
[ 6.885939] cdc_acm 8-1:1.0: ttyACM1: USB ACM device
[ 6.889182] cdc_acm 7-1:1.0: This device cannot do calls on its own. It is not a modem.
[ 6.894347] cdc_acm 7-1:1.0: ttyACM2: USB ACM device
[ 6.897538] usbcore: registered new interface driver cdc_acm
[ 6.897554] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 7.331675] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[ 7.519483] Adding 131068k swap on /var/swap. Priority:-1 extents:1 across:131068k SS
[ 9.056158] systemd-journald[178]: Received request to flush runtime journal from PID 1
[ 9.177067] gmac0: probed
[ 9.177398] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00)
[ 10.984371] Registered IR keymap rc-empty
[ 10.985318] rc0: sunxi-ir as /devices/virtual/rc/rc0
[ 10.991714] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0
[ 13.170271] PHY: gmac0-0:00 - Link is Up - 100/Full
[ 19.690038] eth0: no IPv6 routers present
[ 21.530067] ham0: no IPv6 routers present
[ 27.830105] usb 8-1: reset full-speed USB device number 2 using sunxi-ohci
[ 28.670134] usb 7-1: reset full-speed USB device number 2 using sunxi-ohci
[ 29.510115] usb 6-1: reset full-speed USB device number 2 using sunxi-ohci