Здравствуйте, я новичок на форуме. Своими силами не справляюсь, прошу помочь. Есть проблемная USB Flash Silicon Motion, которую не открыть никак. На ней текстовые файлы, их потерять очень не хочется. Даю выводы команд:
uname -a
Linux myname 2.6.32-431.el6.i686 #1 SMP Fri Nov 22 00:26:36 UTC 2013 i686 i686 i386 GNU/Linux
Device Boot Start End Blocks Id System
/dev/sda1 1 244 1951744 82 Linux swap / Solaris
Partition 1 does not end on cylinder boundary.
/dev/sda2 244 30401 242242241+ 5 Extended
/dev/sda5 4583 30401 207391086 7 HPFS/NTFS
/dev/sda6 * 244 2156 15360000 83 Linux
/dev/sda7 2156 4582 19487744 83 Linux
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 005: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive
Bus 002 Device 004: ID 1410:4100 Novatel Wireless U727
sb 1-3.4: new high speed USB device number 8 using ehci_hcd
usb 1-3.4: New USB device found, idVendor=090c, idProduct=1000
usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.4: Product: USB Flash Disk
usb 1-3.4: Manufacturer: General
usb 1-3.4: SerialNumber: 0410160001006451
usb 1-3.4: configuration #1 chosen from 1 choice
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
usb 1-3.4: reset high speed USB device number 8 using ehci_hcd
usb 1-3.4: reset high speed USB device number 8 using ehci_hcd
usb 1-3.4: device descriptor read/64, error -110
usb 1-3.4: reset high speed USB device number 8 using ehci_hcd
usb 1-3.4: device descriptor read/64, error -110
usb 1-3.4: reset high speed USB device number 8 using ehci_hcd
usb 1-3.4: reset high speed USB device number 8 using ehci_hcd
usb 1-3.4: device descriptor read/64, error -110
scsi 9:0:0:0: Device offlined - not ready after error recovery
Буду благодарен советам и вашей помощи! p.s простите, тег «cut» у меня не сработал