Здравствуйте. Не могу заставить работать свисток на BCM4323
в логах всё видится и определяется. Но WLAN1 так и не появляется.
[root@centos-rpi3 ~]# lsusb | grep Broadcom
Bus 001 Device 007: ID 043e:3001 LG Electronics USA, Inc. AN-WF100 802.11abgn Wireless Adapter [Broadcom BCM4323]
[root@centos-rpi3 ~]#
[ 471.288115] usb 1-1.3: new high-speed USB device number 7 using dwc_otg
[ 471.421026] usb 1-1.3: New USB device found, idVendor=043e, idProduct=3001
[ 471.429053] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 471.437369] usb 1-1.3: Product: Remote Download Wireless Adapter
[ 471.441675] usb 1-1.3: Manufacturer: Broadcom
[ 471.445915] usb 1-1.3: SerialNumber: 0
[root@centos-rpi3 ~]#
[root@centos-rpi3 ~]# ifconfig -a
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.4 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::ba27:ebff:fe05:7e22 prefixlen 64 scopeid 0x20<link>
ether *********** txqueuelen 1000 (Ethernet)
RX packets 6959 bytes 960296 (937.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 6575 bytes 2663005 (2.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 24 bytes 1440 (1.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 24 bytes 1440 (1.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether ************ txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@centos-rpi3 ~]#
Читал нужно ставить преслоутый Ndiswrapper но я тут не в ладах.
