Здравствуйте.
Пытаюсь настроить подключение именно по WI-FI к интернету. По такому поводу пересобрал ядро так:
[*]Networking support -> [*]Wireless
[M]cfg80211 - wireless configuration API
[M]Generic IEEE 802.11 Networking Stack (mac80211)
[*]cfg80211 wireless extensions compatibility
-
Device Drivers -> [*]Network device support -> [*]Wireless LAN
[*]Realtek devices
[M]Realtek rtlwifi family of devices
[M]Realtek RTL8723AE PCIe Wireless Network Adapter
-
[*] Cryptographic API
[*] AES cipher algorithms
[*] AES cipher algorithms (AES-NI)
-
Дополнительно скачал прошивки (sys-kernel/linux-firmware
), а после отредактировал /etc/conf.d/net
:
modules_wlp3s0="wpa_supplicant"
wpa_supplicant_wlp3s0="-Dnl80211"
config_wlp3s0="dhcp"
-
Заполнил /etc/wpa_supplicant/wpa_supplicant.conf
следующим образом:
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
network={
priority=1
bssid=*BSSID*
ssid=*SSID*
mode=0
key_mgmt=WPA-PSK
psk=*WPA_PASSWORD*
}
Сделал для удобства ln -s net.lo net.wlps3s0
. Однако, после запуска ./net.wlps3s0 start
получаю это:
net.wlp3s0 | * Bringing up interface wlp3s0
net.wlp3s0 | * Starting wpa_supplicant on wlp3s0 ...Successfully initialized wpa_supplicant
net.wlp3s0 |Line 6: failed to parse ssid '*SSID*'.
net.wlp3s0 |Line 6: failed to parse ssid '*SSID*'.
net.wlp3s0 |Line 9: Invalid PSK '*WPA_PASSWORD*'.
net.wlp3s0 |Line 9: failed to parse psk '*WPA_PASSWORD*'.
net.wlp3s0 |Line 10: failed to parse network block.
net.wlp3s0 |Failed to read or parse configuration '/etc/wpa_supplicant/wpa_supplicant.conf'.
net.wlp3s0 |
net.wlp3s0 | * start-stop-daemon: failed to start `/usr/sbin/wpa_supplicant'
net.wlp3s0 | [ !! ]
net.wlp3s0 | * ERROR: net.wlp3s0 failed to start
Вывод для dmesg | grep -i -E 'rtl8723ae|wlp3s0|03:00.0'
такой:
[ 0.196496] pci 0000:03:00.0: [10ec:8723] type 00 class 0x028000
[ 0.196541] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.196580] pci 0000:03:00.0: reg 0x18: [mem 0xf7900000-0xf7903fff 64bit]
[ 0.196759] pci 0000:03:00.0: supports D1 D2
[ 0.196761] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 9.094344] rtl8723ae 0000:03:00.0: enabling device (0000 -> 0003)
[ 9.111627] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[ 9.167161] rtl8723ae 0000:03:00.0 wlp3s0: renamed from wlan0
Прошу помощи по вопросу активации сетевой платы нужным образом, а также дальнейшему подключению к интернету по WI-FI.