В принципе не критично, но хотелось бы наушники.
# dmesg | grep -i blue
ugen0.4: <Realtek Bluetooth 5.3 Radio> at usbus0 (disconnected)
ugen0.4: <Realtek Bluetooth 5.3 Radio> at usbus0
ubt0: <Realtek Bluetooth 5.3 Radio, class 224/1, rev 1.10/2.00, addr 4> on usbus0
# service bluetooth start ubt0
% hccontrol -n ubt0hci inquiry
Inquiry result, num_responses=1
Inquiry result #0
BD_ADDR: e4:61:f4:92:4a:12
Page Scan Rep. Mode: 0x1
Page Scan Period Mode: 0x2
Page Scan Mode: 00
Class: 24:04:18
Clock offset: 0x4f04
Inquiry complete. Status: No error [00]
# hccontrol -n ubt0hci remote_name_request e4:61:f4:92:4a:12
BD_ADDR: e4:61:f4:92:4a:12
Name: JBL Tune 520BT
# hccontrol -n ubt0hci create_connection e4:61:f4:92:4a:12
BD_ADDR: e4:61:f4:92:4a:12
Connection handle: 7
Encryption mode: Disabled [0]
% hccontrol -n ubt0hci read_connection_list
Remote BD_ADDR Handle Type Mode Role Encrypt Pending Queue State
e4:61:f4:92:4a:12 7 ACL 2 MAST NONE 0 0 OPEN
% l2ping -a e4:61:f4:92:4a:12
44 bytes from e4:61:f4:92:4a:12 seq_no=0 time=434.930 ms result=0
44 bytes from e4:61:f4:92:4a:12 seq_no=1 time=34.590 ms result=0
44 bytes from e4:61:f4:92:4a:12 seq_no=2 time=13.826 ms result=0
# dmesg | grep pcm
pcm0: <Realtek ALC272 (Analog 2.0+HP/2.0)> at nid 20,33 and 24 on hdaa0
pcm1: <Realtek ALC272 (Onboard Analog Mic)> at nid 18 on hdaa0
pcm2: <Intel Cougar Point (HDMI/DP 8ch)> at nid 5 on hdaa1
# cat /dev/sndstat
Installed devices:
pcm0: <Realtek ALC272 (Analog 2.0+HP/2.0)> (play/rec) default
pcm1: <Realtek ALC272 (Onboard Analog Mic)> (rec)
pcm2: <Intel Cougar Point (HDMI/DP 8ch)> (play)
No devices installed from userspace.
% pkg info | grep -i sound
pulseaudio-16.1_4 Sound server for UNIX
Наушники даже не пикнули, что подключились, да и по неактивности отключились. Куда его дальше пинать, чтобы звук пошёл на наушники? В колонки звук идёт и в проводные наушники идёт.
