Снова BlueTooth

Вот то имеется:

#
# Bluetooth support
#
CONFIG_BLUEZ=m
CONFIG_BLUEZ_L2CAP=m
CONFIG_BLUEZ_SCO=m
CONFIG_BLUEZ_RFCOMM=m
CONFIG_BLUEZ_RFCOMM_TTY=y
CONFIG_BLUEZ_BNEP=m
CONFIG_BLUEZ_BNEP_MC_FILTER=y
CONFIG_BLUEZ_BNEP_PROTO_FILTER=y

#
# Bluetooth device drivers
#
CONFIG_BLUEZ_HCIUSB=m
CONFIG_BLUEZ_USB_SCO=y
CONFIG_BLUEZ_USB_ZERO_PACKET=y
CONFIG_BLUEZ_HCIUART=m
CONFIG_BLUEZ_HCIUART_H4=y
CONFIG_BLUEZ_HCIUART_BCSP=y
CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y
CONFIG_BLUEZ_HCIBFUSB=m
CONFIG_BLUEZ_HCIDTL1=y
CONFIG_BLUEZ_HCIBT3C=y
CONFIG_BLUEZ_HCIBLUECARD=y
CONFIG_BLUEZ_HCIBTUART=y
CONFIG_BLUEZ_HCIVHCI=m

[root@cyclon alexandr]# /usr/sbin/hciconfig rfcomm0 up
[root@cyclon alexandr]# /usr/sbin/hciconfig hci0 up
[root@cyclon alexandr]# /usr/sbin/hciconfig -a
hci0: Type: USB
BD Address: 00:03:C9:23:D2:DB ACL MTU: 377:10 SCO MTU: 16:0
UP RUNNING PSCAN ISCAN
RX bytes:63 acl:0 sco:0 events:7 errors:0
TX bytes:27 acl:0 sco:0 commands:7 errors:0
Features: 0xff 0xfd 0x05 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT
Name: 'Cyclon'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x2 LMP Ver: 1.1 (0x1) LMP Subver: 0x1007
Manufacturer: Broadcom Corporation (15)

[root@cyclon alexandr]# /usr/sbin/hcid -f /etc/bluetooth/hcid.conf
[root@cyclon alexandr]# /usr/bin/hcitool scan
Scanning ...
00:60:57:A5:06:0F Nokia 6600
[root@cyclon alexandr]# /usr/bin/l2ping 00:60:57:A5:06:0F
Ping: 00:60:57:A5:06:0F from 00:03:C9:23:D2:DB (data size 20) ...
0 bytes from 00:60:57:A5:06:0F id 200 time 41.29ms
0 bytes from 00:60:57:A5:06:0F id 201 time 19.68ms
0 bytes from 00:60:57:A5:06:0F id 202 time 19.77ms
0 bytes from 00:60:57:A5:06:0F id 203 time 19.13ms
0 bytes from 00:60:57:A5:06:0F id 204 time 22.13ms
0 bytes from 00:60:57:A5:06:0F id 205 time 21.94ms
0 bytes from 00:60:57:A5:06:0F id 206 time 21.76ms
0 bytes from 00:60:57:A5:06:0F id 207 time 19.57ms
8 sent, 8 received, 0% loss


стоит 2.4.20-13.9 и 9-ая шапка.

Проблема такого рода, не могу создать ни сокет ни устройство хотя в ядре всё включено:

[root@cyclon alexandr]# rfcomm connect rfcomm0 00:60:57:A5:06:0F 1
Can't create RFCOMM TTY: Operation not supported
[root@cyclon alexandr]# rfcomm connect /dev/hci0 00:60:57:A5:06:0F 1
Can't create RFCOMM TTY: Operation not supported
[root@cyclon alexandr]# rfcomm connect /dev/rfcomm0 00:60:57:A5:06:0F 1
Can't create RFCOMM TTY: Operation not supported
[root@cyclon alexandr]# rfcomm bind 0 00:60:57:A5:06:0F 1
Can't create device: Operation not supported

Может кто знает что не хватает!

Заранее спасибо!!!