MR3020 + OpenWRT + HDD

openwrt

0

1

Всем привет! Суть: при подключении HDD по usb он не определяется. dmesg:

... [ 101.590000] hub 1-0:1.0: unable to enumerate USB device on port 1

[ 101.810000] hub 1-0:1.0: unable to enumerate USB device on port 1

[ 102.030000] hub 1-0:1.0: unable to enumerate USB device on port 1

[ 102.250000] hub 1-0:1.0: unable to enumerate USB device on port 1

[ 102.470000] hub 1-0:1.0: unable to enumerate USB device on port 1

[ 102.690000] hub 1-0:1.0: unable to enumerate USB device on port 1

...

В чём может быть дело?

Ссылка

←	makepkg перемещение пакетов в кеш

Ищу аналог Ozi Explorer

→

Что за hdd? Как подключается? Может питания не хватает?

daemonpnz ★★★★★
(13.01.13 12:42:42 MSK)

Ссылка

покажите вывод

opkg list-installed

dmesq

anonymous
(13.01.13 12:49:35 MSK)

MR3020 не умеет high speed и low speed, только full speed, емнип. возможно из-за этого

marvin_yorke ★★★
(13.01.13 13:12:29 MSK)

Ответ на: комментарий от marvin_yorke 13.01.13 13:12:29 MSK

изменяет.

The USB port on the TL-MR3020 is not compatible with USB1 devices (aka full speed) and only works properly with USB2 (aka high speed) devices.

http://wiki.openwrt.org/toh/tp-link/tl-mr3020

anonymous
(13.01.13 13:26:31 MSK)

Ссылка

Ответ на: комментарий от anonymous 13.01.13 12:49:35 MSK

Пакеты:

root@OpenWrt:~# opkg list-installed
base-files - 117-r34185
blkid - 2.21.2-1
block-mount - 0.2.0-9
busybox - 1.19.4-5
dnsmasq - 2.62-2
dropbear - 2011.54-2
firewall - 2-53
hotplug2 - 1.0-beta-4
iptables - 1.4.10-4
iw - 3.6-1
jshn - 2012-10-31.1-407f7a0bb3272ee03f2eb05391ce8b94238fa92e
kernel - 3.3.8-1-5440da3a2c45184a32da6bba25b8dd2a
kmod-ath - 3.3.8+2012-09-07-3
kmod-ath9k - 3.3.8+2012-09-07-3
kmod-ath9k-common - 3.3.8+2012-09-07-3
kmod-cfg80211 - 3.3.8+2012-09-07-3
kmod-crypto-aes - 3.3.8-1
kmod-crypto-arc4 - 3.3.8-1
kmod-crypto-core - 3.3.8-1
kmod-fs-ext4 - 3.3.8-1
kmod-gpio-button-hotplug - 3.3.8-1
kmod-ipt-conntrack - 3.3.8-1
kmod-ipt-core - 3.3.8-1
kmod-ipt-nat - 3.3.8-1
kmod-ipt-nathelper - 3.3.8-1
kmod-leds-gpio - 3.3.8-1
kmod-ledtrig-default-on - 3.3.8-1
kmod-ledtrig-netdev - 3.3.8-1
kmod-ledtrig-timer - 3.3.8-1
kmod-ledtrig-usbdev - 3.3.8-1
kmod-lib-crc-ccitt - 3.3.8-1
kmod-lib-crc16 - 3.3.8-1
kmod-mac80211 - 3.3.8+2012-09-07-3
kmod-nls-base - 3.3.8-1
kmod-ppp - 3.3.8-1
kmod-pppoe - 3.3.8-1
kmod-pppox - 3.3.8-1
kmod-scsi-core - 3.3.8-1
kmod-usb-core - 3.3.8-1
kmod-usb-ohci - 3.3.8-1
kmod-usb-storage - 3.3.8-1
kmod-usb2 - 3.3.8-1
kmod-wdt-ath79 - 3.3.8-1
libblkid - 2.21.2-1
libblobmsg-json - 2012-10-31.1-407f7a0bb3272ee03f2eb05391ce8b94238fa92e
libc - 0.9.33.2-1
libgcc - 4.6-linaro-1
libip4tc - 1.4.10-4
libiwinfo - 36
libiwinfo-lua - 36
libjson - 0.9-2
liblua - 5.1.4-8
libnl-tiny - 0.1-3
libubox - 2012-10-31.1-407f7a0bb3272ee03f2eb05391ce8b94238fa92e
libubus - 2012-06-01-a62e2f8c15a65efb1a82404d8f31e3bfc1cbe7d9
libubus-lua - 2012-06-01-a62e2f8c15a65efb1a82404d8f31e3bfc1cbe7d9
libuci - 2012-03-28.1-1
libuci-lua - 2012-03-28.1-1
libuuid - 2.21.2-1
libxtables - 1.4.10-4
lua - 5.1.4-8
luci - 0.11+svn9425-1
luci-app-firewall - 0.11+svn9425-1
luci-i18n-english - 0.11+svn9425-1
luci-lib-core - 0.11+svn9425-1
luci-lib-ipkg - 0.11+svn9425-1
luci-lib-lmo - 0.11+svn9425-1
luci-lib-nixio - 0.11+svn9425-1
luci-lib-sys - 0.11+svn9425-1
luci-lib-web - 0.11+svn9425-1
luci-mod-admin-core - 0.11+svn9425-1
luci-mod-admin-full - 0.11+svn9425-1
luci-proto-core - 0.11+svn9425-1
luci-proto-ppp - 0.11+svn9425-1
luci-sgi-cgi - 0.11+svn9425-1
luci-theme-base - 0.11+svn9425-1
luci-theme-openwrt - 0.11+svn9425-1
mtd - 18.1
netifd - 2012-10-19-a9fd870450e82f31cba681651656276dfc1c39ac
opkg - 618-2
ppp - 2.4.5-7
ppp-mod-pppoe - 2.4.5-7
swap-utils - 2.21.2-1
swconfig - 10
uboot-envtools - 2012.04.01-1
ubus - 2012-06-01-a62e2f8c15a65efb1a82404d8f31e3bfc1cbe7d9
ubusd - 2012-06-01-a62e2f8c15a65efb1a82404d8f31e3bfc1cbe7d9
uci - 2012-03-28.1-1
uhttpd - 2012-10-30-e57bf6d8bfa465a50eea2c30269acdfe751a46fd
wpad-mini - 20120910-1

dmesq:

...
[   34.700000] device eth0 entered promiscuous mode
[   36.270000] eth0: link up (100Mbps/Full duplex)
[   36.270000] br-lan: port 1(eth0) entered forwarding state
[   36.280000] br-lan: port 1(eth0) entered forwarding state
[   38.280000] br-lan: port 1(eth0) entered forwarding state
[  337.210000] hub 1-0:1.0: unable to enumerate USB device on port 1

logread:

...
Jan 13 14:59:35 OpenWrt authpriv.notice dropbear[1300]: Password auth succeeded for 'root' from 192.168.1.100:37767
Jan 13 15:01:39 OpenWrt kern.err kernel: [  337.210000] hub 1-0:1.0: unable to enumerate USB device on port 1

Хард:

Bus 001 Device 005: ID 1058:1010 Western Digital Technologies, Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x1058 Western Digital Technologies, Inc.
  idProduct          0x1010 
  bcdDevice            1.75
  iManufacturer           1 Western Digital 
  iProduct                2 External HDD    
  iSerial                 3 57442D575831314142305730343435
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Питания должно хватать

mailz
(13.01.13 19:04:50 MSK) автор топика