LINUX.ORG.RU
Форум — General  

Genius Pensketch Tablet не работает перо и мышь

 ,


0

1

Здравствуйте! Помогите, пожалуйста, настроить Genius PenSketch 9x12. Сам планшет определяется, но перо и мышь не работают.

lsusb 

Bus 003 Device 003: ID 5543:0042 UC-Logic Technology Corp. Tablet PF1209

xinput list 

Tablet PF1209            id=12	[slave  pointer  (2)]
Tablet PF1209            id=13	[slave  pointer  (2)]

Xorg.0.log 

[ 23945.168] (II) config/udev: Adding input device     Tablet PF1209 (/dev/input/event7)
[ 23945.168] (**)     Tablet PF1209: Applying InputClass "evdev tablet catchall"
[ 23945.168] (**)     Tablet PF1209: Applying InputClass "Grahics tablet pen"
[ 23945.168] (II) Using input driver 'evdev' for '    Tablet PF1209'
[ 23945.168] (**)     Tablet PF1209: always reports core events
[ 23945.169] (**) evdev:     Tablet PF1209: Device: "/dev/input/event7"
[ 23945.169] (**) evdev:     Tablet PF1209: ButtonMapping '1 3 2'
[ 23945.169] (--) evdev:     Tablet PF1209: Vendor 0x5543 Product 0x42
[ 23945.169] (--) evdev:     Tablet PF1209: Found absolute axes
[ 23945.169] (--) evdev:     Tablet PF1209: Found x and y absolute axes
[ 23945.169] (--) evdev:     Tablet PF1209: Found absolute tablet.
[ 23945.169] (II) evdev:     Tablet PF1209: Configuring as tablet
[ 23945.169] (**) evdev:     Tablet PF1209: YAxisMapping: buttons 4 and 5
[ 23945.169] (**) evdev:     Tablet PF1209: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23945.169] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input13/event7"
[ 23945.169] (II) XINPUT: Adding extended input device "    Tablet PF1209" (type: TABLET, id 12)
[ 23945.169] (II) evdev:     Tablet PF1209: initialized for absolute axes.
[ 23945.169] (**)     Tablet PF1209: (accel) keeping acceleration scheme 1
[ 23945.169] (**)     Tablet PF1209: (accel) acceleration profile 0
[ 23945.169] (**)     Tablet PF1209: (accel) acceleration factor: 2.000
[ 23945.169] (**)     Tablet PF1209: (accel) acceleration threshold: 4
[ 23945.169] (II) config/udev: Adding input device     Tablet PF1209 (/dev/input/mouse1)
[ 23945.169] (II) No input driver specified, ignoring this device.
[ 23945.169] (II) This device may have been added with another device file.
[ 23945.169] (II) config/udev: Adding input device     Tablet PF1209 (/dev/input/event8)
[ 23945.169] (**)     Tablet PF1209: Applying InputClass "evdev pointer catchall"
[ 23945.169] (**)     Tablet PF1209: Applying InputClass "evdev tablet catchall"
[ 23945.169] (**)     Tablet PF1209: Applying InputClass "Graphics tablet mouse"
[ 23945.169] (**)     Tablet PF1209: Applying InputClass "Grahics tablet pen"
[ 23945.169] (II) Using input driver 'evdev' for '    Tablet PF1209'
[ 23945.169] (**)     Tablet PF1209: always reports core events
[ 23945.169] (**) evdev:     Tablet PF1209: Device: "/dev/input/event8"
[ 23945.169] (**) evdev:     Tablet PF1209: ButtonMapping '1 3 2'
[ 23945.169] (--) evdev:     Tablet PF1209: Vendor 0x5543 Product 0x42
[ 23945.169] (--) evdev:     Tablet PF1209: Found 3 mouse buttons
[ 23945.169] (--) evdev:     Tablet PF1209: Found scroll wheel(s)
[ 23945.169] (--) evdev:     Tablet PF1209: Found relative axes
[ 23945.169] (--) evdev:     Tablet PF1209: Found x and y relative axes
[ 23945.169] (II) evdev:     Tablet PF1209: Configuring as mouse
[ 23945.169] (II) evdev:     Tablet PF1209: Adding scrollwheel support
[ 23945.169] (**) evdev:     Tablet PF1209: YAxisMapping: buttons 4 and 5
[ 23945.170] (**) evdev:     Tablet PF1209: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23945.170] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input14/event8"
[ 23945.170] (II) XINPUT: Adding extended input device "    Tablet PF1209" (type: MOUSE, id 13)
[ 23945.170] (II) evdev:     Tablet PF1209: initialized for relative axes.
[ 23945.170] (**)     Tablet PF1209: (accel) keeping acceleration scheme 1
[ 23945.170] (**)     Tablet PF1209: (accel) acceleration profile 0
[ 23945.170] (**)     Tablet PF1209: (accel) acceleration factor: 2.000
[ 23945.170] (**)     Tablet PF1209: (accel) acceleration threshold: 4
[ 23945.170] (II) config/udev: Adding input device     Tablet PF1209 (/dev/input/mouse2)
[ 23945.170] (II) No input driver specified, ignoring this device.
[ 23945.170] (II) This device may have been added with another device file.

← Web conferencing system
Как правильно конвертировать tar.gz в .txz или .tgz (slackware 14) →

Как правило достаточно в /etc/X11/xorg.conf.d/ подбросить конфиг для экзотического девайса ;) Гугли по своей модели скорее всего кто то уже это делал до тебя.

init_6 ★★★★★
()
Ответ на: комментарий от init_6

52-tablet.conf как тут не помогает, wizardpen только из исходников собирается с таким же эффектом, никакой реакции. Сори за девайс :)

caramel
() автор топика
Ответ на: комментарий от caramel

wizardpen только из исходников собирается с таким же эффектом, никакой реакции.

а ты указал, что именно его надо грузить. Я в выхлопе упоминания про него не вижу, выхлоп про evdev...

Upd. Почитай еще http://digitalbluewave.blogspot.com/2008/04/genius-wizardpen-with-hardy-heron...(тут про убунту, но не суть)

Обрати внимание на Driver «wizardpen»

Pinkbyte ★★★★★
()
Последнее исправление: Pinkbyte (всего исправлений: 1)
Ответ на: комментарий от Pinkbyte

Был 70-wizardpen.conf с такими параметрами: 

Section "InputClass"
 Identifier "wizardpen"
 MatchDevicePath "/dev/input/event*"
 MatchProduct "Tablet|PF1209"
 Driver "wizardpen"
 Option "TopX" "0"
 Option "TopY" "1553"
 Option "BottomX" "32541"
 Option "BottomY" "32762"
EndSection

И еще так:

Section "InputClass"
 Identifier "wizardpen"
 MatchIsTablet "on"
 MatchDevicePath "/dev/input/by-id/usb-_Tablet_PF1209-event-mouse"
 MatchVendor "Tablet PF1209"
 Driver "wizardpen"
 Option          "TopX"          "0"
 Option          "TopY"          "1553"
 Option          "BottomX"       "32541"
 Option          "BottomY"       "32762"
EndSection

Ни перо, ни мышь не заработали. Вернулась к evdev, создала 52-tablet.conf:

Section "InputClass"
 Identifier "Graphics tablet mouse"
 MatchIsPointer "on"
 MatchProduct "PF1209"
 MatchDevicePath "/dev/input/event*"
 Driver "evdev"
 # Apply custom Options below.
 Option "Calibration" "0 32541 1553 32762"
EndSection

Section "InputClass"
 Identifier "Grahics tablet pen"
 MatchIsTablet "on"
 MatchProduct "PF1209"
 MatchDevicePath "/dev/input/event*"
 Driver "evdev"
 # Apply custom Options below.
 Option "ButtonMapping" "1 3 2"
 Option "Calibration" "0 32541 1553 32762"
EndSection

Поэтому выхлоп про evdev.

caramel
() автор топика
Ответ на: комментарий от Pinkbyte

Xorg.0.log

[ 45923.922] (II) config/udev: Adding input device     Tablet PF1209 (/dev/input/event7)
[ 45923.922] (**)     Tablet PF1209: Applying InputClass "evdev tablet catchall"
[ 45923.922] (II) Using input driver 'wizardpen' for '    Tablet PF1209'
[ 45923.922] (**)     Tablet PF1209: always reports core events
[ 45923.922] (**) Option "Device" "/dev/input/event7"
[ 45923.922] (--)     Tablet PF1209: MaxX:32767 MaxY:32767 MaxZ:1023
[ 45923.922] (--)     Tablet PF1209: aspect ratio:0.00:1
[ 45923.922] (**)     Tablet PF1209 is in absolute mode
[ 45923.922] (**)     Tablet PF1209: TopX not set, defaulting to "5%"
[ 45923.922] (**)     Tablet PF1209: TopY not set, defaulting to "5%"
[ 45923.922] (**)     Tablet PF1209: BottomX not set, defaulting to "95%"
[ 45923.922] (**)     Tablet PF1209: BottomY not set, defaulting to "95%"
[ 45923.922] (**)     Tablet PF1209: TopX                   = 1638
[ 45923.922] (**)     Tablet PF1209: TopY                   = 1638
[ 45923.922] (**)     Tablet PF1209: BottomX                = 31128
[ 45923.922] (**)     Tablet PF1209: BottomY                = 31128
[ 45923.922] (**)     Tablet PF1209: TopZ    (min pressure) = 0
[ 45923.922] (**)     Tablet PF1209: BottomZ (max pressure) = 1023
[ 45923.922] (**)     Tablet PF1209: always reports core events
[ 45924.030] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input13/event7"
[ 45924.030] (II) XINPUT: Adding extended input device "    Tablet PF1209" (type: WizardPen Tablet, id 12)
[ 45924.030] (II)     Tablet PF1209 Increment: 25
[ 45924.030] (**)     Tablet PF1209: (accel) keeping acceleration scheme 1
[ 45924.030] (**)     Tablet PF1209: (accel) acceleration profile 0
[ 45924.030] (**)     Tablet PF1209: (accel) acceleration factor: 2.000
[ 45924.030] (**)     Tablet PF1209: (accel) acceleration threshold: 4
[ 45924.030] (II) config/udev: Adding input device     Tablet PF1209 (/dev/input/mouse1)
[ 45924.030] (II) No input driver specified, ignoring this device.
[ 45924.030] (II) This device may have been added with another device file.
[ 45924.030] (II) config/udev: Adding input device     Tablet PF1209 (/dev/input/event8)
[ 45924.030] (**)     Tablet PF1209: Applying InputClass "evdev pointer catchall"
[ 45924.030] (**)     Tablet PF1209: Applying InputClass "evdev tablet catchall"
[ 45924.030] (II) Using input driver 'wizardpen' for '    Tablet PF1209'
[ 45924.030] (**)     Tablet PF1209: always reports core events
[ 45924.030] (**) Option "Device" "/dev/input/event8"
[ 45924.030] (--)     Tablet PF1209: MaxX:-1078255512 MaxY:1 MaxZ:0
[ 45924.030] (--)     Tablet PF1209: aspect ratio:0.00:1
[ 45924.030] (**)     Tablet PF1209 is in absolute mode
[ 45924.030] (**)     Tablet PF1209: TopX not set, defaulting to "5%"
[ 45924.030] (**)     Tablet PF1209: TopY not set, defaulting to "5%"
[ 45924.030] (**)     Tablet PF1209: BottomX not set, defaulting to "95%"
[ 45924.030] (**)     Tablet PF1209: BottomY not set, defaulting to "95%"
[ 45924.030] (**)     Tablet PF1209: TopX                   = -53912775
[ 45924.030] (**)     Tablet PF1209: TopY                   = 0
[ 45924.030] (**)     Tablet PF1209: BottomX                = -1024342736
[ 45924.030] (**)     Tablet PF1209: BottomY                = 0
[ 45924.030] (**)     Tablet PF1209: TopZ    (min pressure) = 0
[ 45924.030] (**)     Tablet PF1209: BottomZ (max pressure) = 0
[ 45924.030] (**)     Tablet PF1209: always reports core events
[ 45924.130] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input14/event8"
[ 45924.130] (II) XINPUT: Adding extended input device "    Tablet PF1209" (type: WizardPen Tablet, id 13)
[ 45924.130] (II)     Tablet PF1209 Increment: 1
[ 45924.130] (**)     Tablet PF1209: (accel) keeping acceleration scheme 1
[ 45924.130] (**)     Tablet PF1209: (accel) acceleration profile 0
[ 45924.130] (**)     Tablet PF1209: (accel) acceleration factor: 2.000
[ 45924.130] (**)     Tablet PF1209: (accel) acceleration threshold: 4
[ 45924.130] (II) config/udev: Adding input device     Tablet PF1209 (/dev/input/mouse2)
[ 45924.130] (II) No input driver specified, ignoring this device.
[ 45924.130] (II) This device may have been added with another device file.
caramel
() автор топика
Ответ на: комментарий от caramel

Именно ошибок не вижу(девайс как я понял представляет из себя несколько event-устройств), хотя некоторые значения(например Topx = -53912775) мне кажутся странноватыми.

Что не так? Нет реакции вообще при использовании этого драйвера? Багзилла то у него есть?

Pinkbyte ★★★★★
()
Ответ на: комментарий от Pinkbyte

Что не так? Нет реакции вообще при использовании этого драйвера?

Вобще никакой...

Багзилла то у него есть?

ланчпад

Может быть можно настроить планшет без wizardpen? Пробовала с лайв сд (с ядром 2.6), там мышка работает.

caramel
() автор топика
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.
← Web conferencing system
General
Как правильно конвертировать tar.gz в .txz или .tgz (slackware 14) →