Здравствуйте. Никак не могу запустить иксы. Очень прошу помоши. Видео карта - Intel 82945G/GZ. Дистр - Арч
Xorg.0.log:
[ 202.553]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 202.559] X Protocol Version 11, Revision 0
[ 202.561] Build Operating System: Linux 3.8.7-1-ARCH i686
[ 202.563] Current Operating System: Linux app-gr 3.9.3-1-ARCH #1 SMP PREEMPT Mon May 20 08:00:01 CEST 2013 i686
[ 202.563] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b7594167-e7cd-45c4-94dd-9a9ee24f6b5b ro quiet
[ 202.567] Build Date: 17 April 2013 02:43:06PM
[ 202.569]
[ 202.571] Current version of pixman: 0.30.0
[ 202.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 202.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 202.582] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 22 20:38:29 2013
[ 202.584] (==) Using config file: "/etc/X11/xorg.conf"
[ 202.586] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 202.588] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 202.589] (==) ServerLayout "X.org Configured"
[ 202.589] (**) |-->Screen "Screen0" (0)
[ 202.589] (**) | |-->Monitor "Monitor0"
[ 202.589] (**) | |-->Device "Card0"
[ 202.589] (**) |-->Screen "Screen1" (1)
[ 202.589] (**) | |-->Monitor "Monitor1"
[ 202.589] (**) | |-->Device "Card1"
[ 202.589] (**) |-->Screen "Screen2" (2)
[ 202.589] (**) | |-->Monitor "Monitor2"
[ 202.590] (**) | |-->Device "Card2"
[ 202.590] (**) |-->Screen "Screen3" (3)
[ 202.590] (**) | |-->Monitor "Monitor3"
[ 202.590] (**) | |-->Device "Card3"
[ 202.590] (**) |-->Input Device "Mouse0"
[ 202.590] (**) |-->Input Device "Keyboard0"
[ 202.590] (==) Automatically adding devices
[ 202.590] (==) Automatically enabling devices
[ 202.590] (==) Automatically adding GPU devices
[ 202.590] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 202.590] Entry deleted from font path.
[ 202.590] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 202.590] Entry deleted from font path.
[ 202.590] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 202.590] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 202.590] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 202.590] (WW) Disabling Mouse0
[ 202.590] (WW) Disabling Keyboard0
[ 202.590] (II) Loader magic: 0x8258620
[ 202.590] (II) Module ABI versions:
[ 202.590] X.Org ANSI C Emulation: 0.4
[ 202.590] X.Org Video Driver: 14.1
[ 202.590] X.Org XInput driver : 19.1
[ 202.590] X.Org Server Extension : 7.0
[ 202.591] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 202.592] (--) PCI:*(0:0:2:0) 8086:2772:1043:817a rev 2, Mem @ 0xcfc00000/524288, 0xd0000000/268435456, 0xcfc80000/262144, I/O @ 0x00008800/8
[ 202.594] Initializing built-in extension Generic Event Extension
[ 202.596] Initializing built-in extension SHAPE
[ 202.598] Initializing built-in extension MIT-SHM
[ 202.601] Initializing built-in extension XInputExtension
[ 202.603] Initializing built-in extension XTEST
[ 202.605] Initializing built-in extension BIG-REQUESTS
[ 202.607] Initializing built-in extension SYNC
[ 202.609] Initializing built-in extension XKEYBOARD
[ 202.611] Initializing built-in extension XC-MISC
[ 202.613] Initializing built-in extension SECURITY
[ 202.615] Initializing built-in extension XINERAMA
[ 202.617] Initializing built-in extension XFIXES
[ 202.619] Initializing built-in extension RENDER
[ 202.621] Initializing built-in extension RANDR
[ 202.623] Initializing built-in extension COMPOSITE
[ 202.625] Initializing built-in extension DAMAGE
[ 202.627] Initializing built-in extension MIT-SCREEN-SAVER
[ 202.630] Initializing built-in extension DOUBLE-BUFFER
[ 202.632] Initializing built-in extension RECORD
[ 202.634] Initializing built-in extension DPMS
[ 202.636] Initializing built-in extension X-Resource
[ 202.638] Initializing built-in extension XVideo
[ 202.640] Initializing built-in extension XVideo-MotionCompensation
[ 202.642] Initializing built-in extension XFree86-VidModeExtension
[ 202.644] Initializing built-in extension XFree86-DGA
[ 202.646] Initializing built-in extension XFree86-DRI
[ 202.648] Initializing built-in extension DRI2
[ 202.648] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 202.649] (II) LoadModule: "glx"
[ 202.649] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 202.675] (II) Module glx: vendor="X.Org Foundation"
[ 202.675] compiled for 1.14.1, module version = 1.0.0
[ 202.675] ABI class: X.Org Server Extension, version 7.0
[ 202.675] (==) AIGLX enabled
[ 202.678] Loading extension GLX
[ 202.678] (II) LoadModule: "modesetting"
[ 202.678] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 202.678] (II) Module modesetting: vendor="X.Org Foundation"
[ 202.678] compiled for 1.14.0, module version = 0.7.0
[ 202.678] Module class: X.Org Video Driver
[ 202.678] ABI class: X.Org Video Driver, version 14.1
[ 202.678] (II) LoadModule: "vesa"
[ 202.679] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 202.679] (II) Module vesa: vendor="X.Org Foundation"
[ 202.679] compiled for 1.14.0, module version = 2.3.2
[ 202.679] Module class: X.Org Video Driver
[ 202.679] ABI class: X.Org Video Driver, version 14.1
[ 202.679] (II) LoadModule: "intel"
[ 202.679] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 202.679] (II) Module intel: vendor="X.Org Foundation"
[ 202.679] compiled for 1.14.0, module version = 2.21.6
[ 202.679] Module class: X.Org Video Driver
[ 202.680] ABI class: X.Org Video Driver, version 14.1
[ 202.680] (II) LoadModule: "fbdev"
[ 202.680] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 202.680] (II) Module fbdev: vendor="X.Org Foundation"
[ 202.680] compiled for 1.14.0, module version = 0.4.3
[ 202.680] Module class: X.Org Video Driver
[ 202.680] ABI class: X.Org Video Driver, version 14.1
[ 202.680] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 202.680] (II) VESA: driver for VESA chipsets: vesa
[ 202.680] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 202.681] (II) FBDEV: driver for framebuffer: fbdev
[ 202.681] (++) using VT number 1
[ 202.681] (II) modesetting(0): using drv /dev/dri/card0
[ 202.681] (WW) Falling back to old probe method for vesa
[ 202.681] (WW) Falling back to old probe method for fbdev
[ 202.681] (II) Loading sub module "fbdevhw"
[ 202.681] (II) LoadModule: "fbdevhw"
[ 202.681] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 202.682] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 202.682] compiled for 1.14.1, module version = 0.0.2
[ 202.682] ABI class: X.Org Video Driver, version 14.1
[ 202.682] (==) modesetting(0): Depth 24, (==) framebuffer bpp 32
[ 202.682] (==) modesetting(0): RGB weight 888
[ 202.682] (==) modesetting(0): Default visual is TrueColor
[ 202.682] (II) modesetting(0): ShadowFB: preferred YES, enabled YES
[ 202.763] (II) modesetting(0): Output VGA-0 using monitor section Monitor0
[ 202.840] (II) modesetting(0): EDID for output VGA-0
[ 202.840] (II) modesetting(0): Manufacturer: SAM Model: 68a Serial#: 809054768
[ 202.840] (II) modesetting(0): Year: 2012 Week: 8
[ 202.840] (II) modesetting(0): EDID Version: 1.3
[ 202.840] (II) modesetting(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 202.840] (II) modesetting(0): Sync: Separate Composite SyncOnGreen
[ 202.840] (II) modesetting(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 202.840] (II) modesetting(0): Gamma: 2.20
[ 202.840] (II) modesetting(0): DPMS capabilities: Off; RGB/Color Display
[ 202.840] (II) modesetting(0): First detailed timing is preferred mode
[ 202.840] (II) modesetting(0): redX: 0.638 redY: 0.348 greenX: 0.334 greenY: 0.608
[ 202.840] (II) modesetting(0): blueX: 0.150 blueY: 0.057 whiteX: 0.312 whiteY: 0.329
[ 202.840] (II) modesetting(0): Supported established timings:
[ 202.840] (II) modesetting(0): 720x400@70Hz
[ 202.840] (II) modesetting(0): 640x480@60Hz
[ 202.840] (II) modesetting(0): 640x480@67Hz
[ 202.840] (II) modesetting(0): 640x480@72Hz
[ 202.840] (II) modesetting(0): 640x480@75Hz
[ 202.840] (II) modesetting(0): 800x600@56Hz
[ 202.840] (II) modesetting(0): 800x600@60Hz
[ 202.840] (II) modesetting(0): 800x600@72Hz
[ 202.840] (II) modesetting(0): 800x600@75Hz
[ 202.840] (II) modesetting(0): 832x624@75Hz
[ 202.840] (II) modesetting(0): 1024x768@60Hz
[ 202.840] (II) modesetting(0): 1024x768@70Hz
[ 202.840] (II) modesetting(0): 1024x768@75Hz
[ 202.840] (II) modesetting(0): 1280x1024@75Hz
[ 202.840] (II) modesetting(0): 1152x864@75Hz
[ 202.840] (II) modesetting(0): Manufacturer's mask: 0
[ 202.840] (II) modesetting(0): Supported standard timings:
[ 202.840] (II) modesetting(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 202.840] (II) modesetting(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 202.840] (II) modesetting(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 202.840] (II) modesetting(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 202.840] (II) modesetting(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 202.840] (II) modesetting(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 202.840] (II) modesetting(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 202.840] (II) modesetting(0): #7: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 202.840] (II) modesetting(0): Supported detailed timing:
[ 202.840] (II) modesetting(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 202.840] (II) modesetting(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 202.840] (II) modesetting(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 202.840] (II) modesetting(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 202.840] (II) modesetting(0): Monitor name: SMBX2440
[ 202.840] (II) modesetting(0): Serial No: HLOB200250
[ 202.840] (II) modesetting(0): EDID (in hex):
[ 202.840] (II) modesetting(0): 00ffffffffffff004c2d8a0630323930
[ 202.840] (II) modesetting(0): 081601030e351e782a4ba1a359559b26
[ 202.840] (II) modesetting(0): 0e5054bfef808100814081809500a940
[ 202.840] (II) modesetting(0): b300714f950f023a801871382d40582c
[ 202.840] (II) modesetting(0): 4500132b2100001e000000fd00384b1e
[ 202.840] (II) modesetting(0): 5111000a202020202020000000fc0053
[ 202.840] (II) modesetting(0): 4d4258323434300a20202020000000ff
[ 202.840] (II) modesetting(0): 00484c4f423230303235300a2020003c
[ 202.840] (II) modesetting(0): Printing probed modes for output VGA-0
[ 202.841] (II) modesetting(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 202.841] (II) modesetting(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 202.841] (II) modesetting(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 202.841] (II) modesetting(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 202.841] (II) modesetting(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 202.841] (II) modesetting(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 202.841] (II) modesetting(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 202.841] (II) modesetting(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 202.841] (II) modesetting(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 202.841] (II) modesetting(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 202.841] (II) modesetting(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 202.841] (II) modesetting(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 202.841] (II) modesetting(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 202.841] (II) modesetting(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 202.841] (II) modesetting(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 202.841] (II) modesetting(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 202.841] (II) modesetting(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 202.841] (II) modesetting(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 202.841] (II) modesetting(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 202.841] (II) modesetting(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 202.841] (II) modesetting(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 202.841] (II) modesetting(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 202.841] (II) modesetting(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 202.841] (II) modesetting(0): Output VGA-0 connected
[ 202.841] (II) modesetting(0): Using exact sizes for initial modes
[ 202.841] (II) modesetting(0): Output VGA-0 using initial mode 1920x1080
[ 202.841] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 202.841] (==) modesetting(0): DPI set to (96, 96)
[ 202.841] (II) Loading sub module "fb"
[ 202.841] (II) LoadModule: "fb"
[ 202.848] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 202.859] (II) Module fb: vendor="X.Org Foundation"
[ 202.859] compiled for 1.14.1, module version = 1.0.0
[ 202.859] ABI class: X.Org ANSI C Emulation, version 0.4
[ 202.859] (II) Loading sub module "shadow"
[ 202.859] (II) LoadModule: "shadow"
[ 202.859] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 202.860] (II) Module shadow: vendor="X.Org Foundation"
[ 202.861] compiled for 1.14.1, module version = 1.1.0
[ 202.861] ABI class: X.Org ANSI C Emulation, version 0.4
[ 202.861] (II) UnloadModule: "vesa"
[ 202.861] (II) Unloading vesa
[ 202.861] (II) UnloadModule: "intel"
[ 202.861] (II) Unloading intel
[ 202.861] (II) UnloadModule: "fbdev"
[ 202.861] (II) Unloading fbdev
[ 202.861] (II) UnloadSubModule: "fbdevhw"
[ 202.861] (II) Unloading fbdevhw
[ 202.861] (==) Depth 24 pixmap format is 32 bpp
[ 202.882] (==) modesetting(0): Backing store disabled
[ 202.882] (==) modesetting(0): Silken mouse enabled
[ 202.882] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 202.883] (==) modesetting(0): DPMS enabled
[ 202.906] (--) RandR disabled
[ 202.921] (II) AIGLX: Screen 0 is not DRI2 capable
[ 202.921] (II) AIGLX: Screen 0 is not DRI capable
[ 203.433] (II) AIGLX: Loaded and initialized swrast
[ 203.433] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 203.434] (II) modesetting(0): Damage tracking initialized
[ 203.434] (II) modesetting(0): Setting screen physical size to 507 x 285
[ 204.052] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 204.052] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 204.053] (II) LoadModule: "evdev"
[ 204.053] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 204.071] (II) Module evdev: vendor="X.Org Foundation"
[ 204.071] compiled for 1.14.0, module version = 2.8.0
[ 204.071] Module class: X.Org XInput Driver
[ 204.071] ABI class: X.Org XInput driver, version 19.1
[ 204.072] (II) Using input driver 'evdev' for 'Power Button'
[ 204.072] (**) Power Button: always reports core events
[ 204.072] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 204.072] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 204.072] (--) evdev: Power Button: Found keys
[ 204.072] (II) evdev: Power Button: Configuring as keyboard
[ 204.072] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 204.072] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 204.072] (**) Option "xkb_rules" "evdev"
[ 204.072] (**) Option "xkb_model" "evdev"
[ 204.072] (**) Option "xkb_layout" "us"
[ 204.111] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 204.111] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 204.111] (II) Using input driver 'evdev' for 'Power Button'
[ 204.111] (**) Power Button: always reports core events
[ 204.111] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 204.111] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 204.111] (--) evdev: Power Button: Found keys
[ 204.111] (II) evdev: Power Button: Configuring as keyboard
[ 204.111] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 204.111] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 204.111] (**) Option "xkb_rules" "evdev"
[ 204.111] (**) Option "xkb_model" "evdev"
[ 204.112] (**) Option "xkb_layout" "us"
[ 204.112] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 204.113] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event4)
[ 204.113] (II) No input driver specified, ignoring this device.
[ 204.113] (II) This device may have been added with another device file.
[ 204.113] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
[ 204.113] (II) No input driver specified, ignoring this device.
[ 204.113] (II) This device may have been added with another device file.
[ 204.114] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event6)
[ 204.114] (II) No input driver specified, ignoring this device.
[ 204.114] (II) This device may have been added with another device file.
[ 204.114] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 204.114] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 204.114] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 204.114] (**) AT Translated Set 2 keyboard: always reports core events
[ 204.114] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 204.114] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 204.114] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 204.114] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 204.114] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 204.114] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 204.114] (**) Option "xkb_rules" "evdev"
[ 204.114] (**) Option "xkb_model" "evdev"
[ 204.114] (**) Option "xkb_layout" "us"
[ 204.115] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event7)
[ 204.115] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 204.115] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 204.115] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 204.115] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event7"
[ 204.115] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 204.115] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 204.115] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 204.115] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[ 204.115] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 204.116] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 204.116] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 204.116] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 204.116] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 204.116] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 204.116] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 9)
[ 204.116] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 204.116] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 204.116] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 204.116] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 204.116] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 204.117] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 204.117] (II) No input driver specified, ignoring this device.
[ 204.117] (II) This device may have been added with another device file.
[ 204.117] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 204.117] (II) No input driver specified, ignoring this device.
[ 204.117] (II) This device may have been added with another device file.
[ 204.260] (II) evdev: ImPS/2 Generic Wheel Mouse: Close
[ 204.261] (II) UnloadModule: "evdev"
[ 204.261] (II) evdev: AT Translated Set 2 keyboard: Close
[ 204.261] (II) UnloadModule: "evdev"
[ 204.261] (II) evdev: Power Button: Close
[ 204.261] (II) UnloadModule: "evdev"
[ 204.261] (II) evdev: Power Button: Close
[ 204.261] (II) UnloadModule: "evdev"
[ 204.355] Server terminated successfully (0). Closing log file.
И xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Screen 3 "Screen3" RightOf "Screen2"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor3"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "kmsdev" # <str>
#Option "ShadowFB" # [<bool>]
Identifier "Card0"
Driver "modesetting"
BusID "PCI:0:2:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card1"
Driver "vesa"
BusID "PCI:0:2:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "DRI" # <str>
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "RelaxedFencing" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card2"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # <str>
#Option "fbdev" # <str>
#Option "debug" # [<bool>]
Identifier "Card3"
Driver "fbdev"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Card2"
Monitor "Monitor2"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen3"
Device "Card3"
Monitor "Monitor3"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection