добрый день, пытаюсь подключить usb модем alcatel x232d «связной» в opensuse 13.2 lsusb выдает Bus 001 Device 013: ID 1bbb:022c T & A Mobile Phones в файле http://www.draisberghof.de/usb_modeswitch/device_reference.txt такого модема нет создал файл cat /etc/usb_modeswitch.conf # Alcatel OT-X220D # # Contributor: Javier Llorente
DefaultVendor= 0x1bbb DefaultProduct=0x022c
TargetVendor= 0x1bbb TargetProduct= 0x0017
MessageContent=«55534243123456788000000080000606f50402527000000000000000000000»
EnableLogging=1
команда usb_modeswitch -c /etc/usb_modeswitch.conf выдает: Look for target devices ... No devices in target mode or class found Look for default devices ... product ID matched Found devices in default mode (1) Access device 014 on bus 001 Current configuration number is 1 Use interface number 0 Use endpoints 0x01 (out) and 0x81 (in) Ambiguous Class/InterfaceClass: 0xef/0x08
USB description data (for identification) ------------------------- Manufacturer: Spreadtrum Product: HSPA+ USB Modem Serial No.: not provided ------------------------- Looking for active driver ... OK, driver detached Set up interface 0 Use endpoint 0x01 for message sending ... Trying to send message 1 to endpoint 0x01 ... OK, message successfully sent Reset response endpoint 0x81 Reset message endpoint 0x01 -> Run lsusb to note any changes. Bye! команда usb_modeswitch -v 1bbb -p 022c -M 55534243123456788000000080000606f50402527000000000000000000000 выдает Look for default devices ... product ID matched Found devices in default mode (1) Access device 014 on bus 001 Current configuration number is 1 Use interface number 0 Use endpoints 0x01 (out) and 0x81 (in) Ambiguous Class/InterfaceClass: 0xef/0x08
USB description data (for identification) ------------------------- Manufacturer: Spreadtrum Product: HSPA+ USB Modem Serial No.: not provided ------------------------- Looking for active driver ... No active driver found. Detached before or never attached Set up interface 0 Use endpoint 0x01 for message sending ... Trying to send message 1 to endpoint 0x01 ... Sending the message returned error -7. Try to continue Reset response endpoint 0x81 Reset message endpoint 0x01 -> Run lsusb to note any changes. Bye! lsusb говорит что ничего не поменялось девайс /dev/ttyUSB* не появился что делать куда копать?
