Рабочая внешняя сетевая карта не работает.

enp3s0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 90:2b:34:10:3c:6d  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp4s2: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 00:07:e9:39:2c:1c  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 930  bytes 83664 (83.6 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 930  bytes 83664 (83.6 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Settings for enp4s2:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Supported FEC modes: Not reported
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised pause frame use: No
        Advertised auto-negotiation: Yes
        Advertised FEC modes: Not reported
        Speed: Unknown!
        Duplex: Unknown! (255)
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        MDI-X: Unknown (auto)
        Supports Wake-on: umbg
        Wake-on: g
        Current message level: 0x00000007 (7)
                               drv probe link
        Link detected: no

# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
  version: 2
  renderer: networkd
  ethernets:
    enp3s0:
      dhcp4: no
      dhcp6: no
      optional: true
      addresses: [27.xxx.xxx.6/30]
      gateway4: 27.xxx.xxx.5
      nameservers:
          addresses: [8.8.8.8, 8.8.8.8]
    enp4s2:
      dhcp4: no
      dhcp6: no
      optional: true
      addresses: [137.xxx.xxx.129/25]