Диск не монтируется, ошибки в dmesg.
Dmesg
ata1.00: exception Emask 0x0 SAct 0x20000 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:88:00:10:00/00:00:00:00:00/40 tag 17 ncq dma 4096 in
res 51/40:08:00:10:00/00:00:00:00:00/40 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sdb] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=4s
sd 0:0:0:0: [sdb] tag#17 Sense Key : Medium Error [current]
sd 0:0:0:0: [sdb] tag#17 Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sdb] tag#17 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 4096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:b8:00:10:00/00:00:00:00:00/40 tag 23 ncq dma 4096 in
res 51/40:08:00:10:00/00:00:00:00:00/40 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sdb] tag#23 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=4s
sd 0:0:0:0: [sdb] tag#23 Sense Key : Medium Error [current]
sd 0:0:0:0: [sdb] tag#23 Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sdb] tag#23 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 4096 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Buffer I/O error on dev sdb, logical block 512, async page read
Smartctl -a
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.8.0-0.bpo.2-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: HGST Travelstar Z5K1000
Device Model: HGST HTS541075A7E630
Serial Number: S0A100SNG0SXZL
LU WWN Device Id: 5 000cca 754c059d9
Firmware Version: SE2OA4A0
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Dec 5 22:06:21 2020 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 203) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 095 095 062 Pre-fail Always - 851968
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 143 143 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 033 033 000 Old_age Always - 106669
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 070 070 000 Old_age Always - 13430
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2762
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 219
193 Load_Cycle_Count 0x0012 061 061 000 Old_age Always - 391991
194 Temperature_Celsius 0x0002 250 250 000 Old_age Always - 24 (Min/Max 5/46)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 8
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 395 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 395 occurred at disk power-on lifetime: 13430 hours (559 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 00 10 00 00 Error: UNC at LBA = 0x00001000 = 4096
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 b0 00 10 00 40 00 00:02:44.665 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:02:44.665 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:02:44.664 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:02:44.663 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:02:44.663 SET FEATURES [Set transfer mode]
Error 394 occurred at disk power-on lifetime: 13430 hours (559 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 02 10 00 00 Error: UNC at LBA = 0x00001002 = 4098
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 02 28 02 10 00 40 00 00:02:40.621 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:02:40.621 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:02:40.620 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:02:40.619 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:02:40.619 SET FEATURES [Set transfer mode]
Error 393 occurred at disk power-on lifetime: 13430 hours (559 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 02 10 00 00 Error: UNC at LBA = 0x00001002 = 4098
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 02 68 02 10 00 40 00 00:02:36.577 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:02:36.577 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:02:36.577 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:02:36.576 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:02:36.575 SET FEATURES [Set transfer mode]
Error 392 occurred at disk power-on lifetime: 13430 hours (559 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 02 10 00 00 Error: UNC at LBA = 0x00001002 = 4098
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 02 20 02 10 00 40 00 00:02:32.522 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:02:32.521 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:02:32.521 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:02:32.520 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:02:32.520 SET FEATURES [Set transfer mode]
Error 391 occurred at disk power-on lifetime: 13430 hours (559 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 10 00 00 Error: UNC at LBA = 0x00001000 = 4096
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 88 00 10 00 40 00 00:02:28.465 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:02:28.465 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:02:28.465 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:02:28.464 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:02:28.464 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Aborted by host 90% 4152 -
# 2 Extended offline Completed without error 00% 3329 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
