LINUX.ORG.RU
Форум — Linux-hardware  

Ubuntu server 20.04.2 + Samsung 870 EVO 1TB

 , ,


1

1

Столкнулся с проблемой…ссдешник еле ластами шевелит сыпятся ошибки и работает только в udma2. Куда копать подскажите. Проверял на W10, полет нормальный.

 Model=Samsung SSD 870 EVO 1TB, FwRev=SVT01B6Q, SerialNo=S625NJ0NC09862J
 Config={ Fixed }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
 BuffType=unknown, BuffSize=unknown, MaxMultSect=1, MultSect=1
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=1953525168
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 udma6
 AdvancedPM=no WriteCache=enabled
 Drive conforms to: unknown:  ATA/ATAPI-2,3,4,5,6,7

 * signifies the current active mode

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-72-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     Samsung SSD 870 EVO 1TB
Serial Number:    S625NJ0NC09862J
LU WWN Device Id: 5 002538 f30c558f4
Firmware Version: SVT01B6Q
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Mon May 10 13:17:57 2021 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x53) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  85) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       234
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       28
177 Wear_Leveling_Count     0x0013   097   097   000    Pre-fail  Always       -       53
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   063   054   000    Old_age   Always       -       37
195 Hardware_ECC_Recovered  0x001a   200   200   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x003e   096   096   000    Old_age   Always       -       3744
235 Unknown_Attribute       0x0012   099   099   000    Old_age   Always       -       23
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       95789076082

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
  256        0    65535  Read_scanning was never started
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Ошибки:

[23585.994830] ata1: hard resetting link
[23586.469194] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[23586.469456] ata1.00: supports DRM functions and may not be fully accessible
[23586.471814] ata1.00: supports DRM functions and may not be fully accessible
[23586.473814] ata1.00: configured for UDMA/33
[23586.473831] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[23586.473833] sd 0:0:0:0: [sda] tag#1 Sense Key : Illegal Request [current]
[23586.473835] sd 0:0:0:0: [sda] tag#1 Add. Sense: Unaligned write command
[23586.473837] sd 0:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 46 2c fb 50 00 03 f8 00
[23586.473839] blk_update_request: I/O error, dev sda, sector 1177353040 op 0x0:(READ) flags 0x80700 phys_seg 127 prio class 0
[23586.475030] sd 0:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[23586.475032] sd 0:0:0:0: [sda] tag#2 Sense Key : Illegal Request [current]
[23586.475034] sd 0:0:0:0: [sda] tag#2 Add. Sense: Unaligned write command
[23586.475035] sd 0:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 46 2c ff 50 00 04 00 00
[23586.475037] blk_update_request: I/O error, dev sda, sector 1177354064 op 0x0:(READ) flags 0x80700 phys_seg 128 prio class 0
[23586.476188] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[23586.476190] sd 0:0:0:0: [sda] tag#3 Sense Key : Illegal Request [current]
[23586.476191] sd 0:0:0:0: [sda] tag#3 Add. Sense: Unaligned write command
[23586.476192] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 46 2d 03 50 00 03 f8 00
[23586.476194] blk_update_request: I/O error, dev sda, sector 1177355088 op 0x0:(READ) flags 0x80700 phys_seg 127 prio class 0
[23586.477349] sd 0:0:0:0: [sda] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[23586.477350] sd 0:0:0:0: [sda] tag#24 Sense Key : Illegal Request [current]
[23586.477352] sd 0:0:0:0: [sda] tag#24 Add. Sense: Unaligned write command
[23586.477353] sd 0:0:0:0: [sda] tag#24 CDB: Read(10) 28 00 42 76 89 28 00 01 00 00
[23586.477355] blk_update_request: I/O error, dev sda, sector 1115064616 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[23586.478481] sd 0:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[23586.478482] sd 0:0:0:0: [sda] tag#25 Sense Key : Illegal Request [current]
[23586.478484] sd 0:0:0:0: [sda] tag#25 Add. Sense: Unaligned write command
[23586.478485] sd 0:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 42 76 8a 28 00 01 00 00
[23586.478487] blk_update_request: I/O error, dev sda, sector 1115064872 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[23586.479589] ata1: EH complete
[23586.479666] ata1.00: Enabling discard_zeroes_data
[23693.878168] ata1.00: exception Emask 0x0 SAct 0x3800000e SErr 0x0 action 0x6
[23693.879298] ata1.00: irq_stat 0x40000008
[23693.880398] ata1.00: failed command: READ FPDMA QUEUED
[23693.881517] ata1.00: cmd 60/00:08:20:45:3e/01:00:3d:00:00/40 tag 1 ncq dma 131072 in
                        res 41/84:00:20:45:3e/00:01:3d:00:00/00 Emask 0x410 (ATA bus error) <F>
[23693.883742] ata1.00: status: { DRDY ERR }
[23693.884845] ata1.00: error: { ICRC ABRT }
[23693.885988] ata1: hard resetting link
[23694.361393] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[23694.361630] ata1.00: supports DRM functions and may not be fully accessible
[23694.364043] ata1.00: supports DRM functions and may not be fully accessible
[23694.366016] ata1.00: configured for UDMA/33
[23694.366032] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[23694.366034] sd 0:0:0:0: [sda] tag#1 Sense Key : Aborted Command [current]
[23694.366037] sd 0:0:0:0: [sda] tag#1 Add. Sense: Scsi parity error
[23694.366039] sd 0:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 3d 3e 45 20 00 01 00 00
[23694.366041] blk_update_request: I/O error, dev sda, sector 1027491104 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[23694.367192] ata1: EH complete
[23694.367258] ata1.00: Enabling discard_zeroes_data
[23769.674266] ata1.00: exception Emask 0x0 SAct 0x4300 SErr 0x0 action 0x6
[23769.675412] ata1.00: irq_stat 0x40000008
[23769.676516] ata1.00: failed command: READ FPDMA QUEUED
[23769.677673] ata1.00: cmd 60/00:40:50:24:45/08:00:43:00:00/40 tag 8 ncq dma 1048576 in
                        res 41/84:00:50:24:45/00:08:43:00:00/00 Emask 0x410 (ATA bus error) <F>
[23769.679917] ata1.00: status: { DRDY ERR }
[23769.681029] ata1.00: error: { ICRC ABRT }
[23769.682156] ata1: hard resetting link
[23770.157504] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[23770.157754] ata1.00: supports DRM functions and may not be fully accessible
[23770.159960] ata1.00: supports DRM functions and may not be fully accessible
[23770.161877] ata1.00: configured for UDMA/33
[23770.161896] sd 0:0:0:0: [sda] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[23770.161899] sd 0:0:0:0: [sda] tag#8 Sense Key : Aborted Command [current]
[23770.161902] sd 0:0:0:0: [sda] tag#8 Add. Sense: Scsi parity error
[23770.161905] sd 0:0:0:0: [sda] tag#8 CDB: Read(10) 28 00 43 45 24 50 00 08 00 00
[23770.161907] blk_update_request: I/O error, dev sda, sector 1128604752 op 0x0:(READ) flags 0x80700 phys_seg 148 prio class 0
[23770.163314] ata1: EH complete
[23770.163386] ata1.00: Enabling discard_zeroes_data
[23873.670441] ata1.00: exception Emask 0x0 SAct 0x38c0 SErr 0x0 action 0x6
[23873.671590] ata1.00: irq_stat 0x40000008
[23873.672709] ata1.00: failed command: READ FPDMA QUEUED
[23873.673851] ata1.00: cmd 60/00:30:10:aa:0a/01:00:4d:00:00/40 tag 6 ncq dma 131072 in
                        res 41/84:00:10:aa:0a/00:01:4d:00:00/00 Emask 0x410 (ATA bus error) <F>
[23873.676106] ata1.00: status: { DRDY ERR }
[23873.677229] ata1.00: error: { ICRC ABRT }
[23873.678393] ata1: hard resetting link
[23874.153726] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[23874.153959] ata1.00: supports DRM functions and may not be fully accessible
[23874.156229] ata1.00: supports DRM functions and may not be fully accessible
[23874.158174] ata1.00: configured for UDMA/33
[23874.158186] sd 0:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[23874.158188] sd 0:0:0:0: [sda] tag#6 Sense Key : Aborted Command [current]
[23874.158190] sd 0:0:0:0: [sda] tag#6 Add. Sense: Scsi parity error
[23874.158192] sd 0:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 4d 0a aa 10 00 01 00 00
[23874.158195] blk_update_request: I/O error, dev sda, sector 1292544528 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
[23874.159376] ata1: EH complete
[23874.159434] ata1.00: Enabling discard_zeroes_data
[23911.454490] ata1.00: exception Emask 0x0 SAct 0x80600 SErr 0x0 action 0x6
[23911.455940] ata1.00: irq_stat 0x40000008
[23911.457286] ata1.00: failed command: READ FPDMA QUEUED
[23911.458652] ata1.00: cmd 60/00:48:c0:13:2c/08:00:44:00:00/40 tag 9 ncq dma 1048576 in
                        res 41/84:00:c0:13:2c/00:08:44:00:00/00 Emask 0x410 (ATA bus error) <F>
[23911.461391] ata1.00: status: { DRDY ERR }
[23911.462743] ata1.00: error: { ICRC ABRT }
[23911.464072] ata1: hard resetting link
[23911.937764] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[23911.938010] ata1.00: supports DRM functions and may not be fully accessible
[23911.940222] ata1.00: supports DRM functions and may not be fully accessible
[23911.942108] ata1.00: configured for UDMA/33
[23911.942125] sd 0:0:0:0: [sda] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[23911.942128] sd 0:0:0:0: [sda] tag#9 Sense Key : Aborted Command [current]
[23911.942131] sd 0:0:0:0: [sda] tag#9 Add. Sense: Scsi parity error
[23911.942134] sd 0:0:0:0: [sda] tag#9 CDB: Read(10) 28 00 44 2c 13 c0 00 08 00 00
[23911.942136] blk_update_request: I/O error, dev sda, sector 1143739328 op 0x0:(READ) flags 0x80700 phys_seg 66 prio class 0
[23911.943580] ata1: EH complete
[23911.943653] ata1.00: Enabling discard_zeroes_data
[23912.437772] ata1.00: exception Emask 0x10 SAct 0x40000400 SErr 0x0 action 0x6 frozen
[23912.439231] ata1.00: irq_stat 0x08000000, interface fatal error
[23912.440616] ata1.00: failed command: WRITE FPDMA QUEUED
[23912.442011] ata1.00: cmd 61/70:50:c0:73:15/00:00:50:00:00/40 tag 10 ncq dma 57344 out
                        res 40/00:50:c0:73:15/00:00:50:00:00/40 Emask 0x10 (ATA bus error)
[23912.444790] ata1.00: status: { DRDY }
[23912.446176] ata1.00: failed command: READ FPDMA QUEUED
[23912.447545] ata1.00: cmd 60/08:f0:68:15:2c/00:00:44:00:00/40 tag 30 ncq dma 4096 in
                        res 40/00:50:c0:73:15/00:00:50:00:00/40 Emask 0x10 (ATA bus error)
[23912.450332] ata1.00: status: { DRDY }
[23912.451689] ata1: hard resetting link
[23912.929801] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[23912.930052] ata1.00: supports DRM functions and may not be fully accessible
[23912.932262] ata1.00: supports DRM functions and may not be fully accessible
[23912.934150] ata1.00: configured for UDMA/33
[23912.934163] ata1: EH complete
[23912.934229] ata1.00: Enabling discard_zeroes_data
[23956.630554] ata1.00: exception Emask 0x0 SAct 0x81c00000 SErr 0x0 action 0x6
[23956.631740] ata1.00: irq_stat 0x40000008
[23956.632904] ata1.00: failed command: READ FPDMA QUEUED
[23956.634101] ata1.00: cmd 60/00:b0:18:33:14/01:00:41:00:00/40 tag 22 ncq dma 131072 in
                        res 41/84:00:18:33:14/00:01:41:00:00/00 Emask 0x410 (ATA bus error) <F>
[23956.636440] ata1.00: status: { DRDY ERR }
[23956.637606] ata1.00: error: { ICRC ABRT }
[23956.638801] ata1: hard resetting link
[23957.113912] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[23957.114147] ata1.00: supports DRM functions and may not be fully accessible
[23957.116561] ata1.00: supports DRM functions and may not be fully accessible
[23957.118563] ata1.00: configured for UDMA/33
[23957.118576] sd 0:0:0:0: [sda] tag#22 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[23957.118579] sd 0:0:0:0: [sda] tag#22 Sense Key : Aborted Command [current]
[23957.118581] sd 0:0:0:0: [sda] tag#22 Add. Sense: Scsi parity error
[23957.118583] sd 0:0:0:0: [sda] tag#22 CDB: Read(10) 28 00 41 14 33 18 00 01 00 00
[23957.118585] blk_update_request: I/O error, dev sda, sector 1091842840 op 0x0:(READ) flags 0x80700 phys_seg 16 prio class 0
[23957.119818] ata1: EH complete
[23957.119897] ata1.00: Enabling discard_zeroes_data
[24032.814744] ata1.00: exception Emask 0x0 SAct 0x200030 SErr 0x0 action 0x6
[24032.815961] ata1.00: irq_stat 0x40000008
[24032.817151] ata1.00: failed command: READ FPDMA QUEUED
[24032.818384] ata1.00: cmd 60/c0:20:88:f8:eb/02:00:44:00:00/40 tag 4 ncq dma 360448 in
                        res 41/84:c0:88:f8:eb/00:02:44:00:00/00 Emask 0x410 (ATA bus error) <F>
[24032.820780] ata1.00: status: { DRDY ERR }
[24032.821992] ata1.00: error: { ICRC ABRT }
[24032.823181] ata1: hard resetting link
[24033.301992] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[24033.302244] ata1.00: supports DRM functions and may not be fully accessible
[24033.304455] ata1.00: supports DRM functions and may not be fully accessible
[24033.306343] ata1.00: configured for UDMA/33
[24033.306360] sd 0:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[24033.306363] sd 0:0:0:0: [sda] tag#4 Sense Key : Aborted Command [current]
[24033.306366] sd 0:0:0:0: [sda] tag#4 Add. Sense: Scsi parity error
[24033.306369] sd 0:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 44 eb f8 88 00 02 c0 00
[24033.306372] blk_update_request: I/O error, dev sda, sector 1156315272 op 0x0:(READ) flags 0x80700 phys_seg 73 prio class 0
[24033.307875] ata1: EH complete
[24033.307981] ata1.00: Enabling discard_zeroes_data
[24137.890205] ata1.00: exception Emask 0x10 SAct 0x1ec000 SErr 0x0 action 0x6 frozen
[24137.891456] ata1.00: irq_stat 0x08000000, interface fatal error
[24137.892620] ata1.00: failed command: READ FPDMA QUEUED
[24137.893821] ata1.00: cmd 60/f8:70:58:f2:1f/03:00:1e:00:00/40 tag 14 ncq dma 520192 in
                        res 40/00:88:88:d1:a4/00:00:50:00:00/40 Emask 0x10 (ATA bus error)
[24137.896312] ata1.00: status: { DRDY }
[24137.897560] ata1.00: failed command: READ FPDMA QUEUED
[24137.898825] ata1.00: cmd 60/00:78:58:f6:1f/04:00:1e:00:00/40 tag 15 ncq dma 524288 in
                        res 40/00:88:88:d1:a4/00:00:50:00:00/40 Emask 0x10 (ATA bus error)
[24137.901279] ata1.00: status: { DRDY }
[24137.902500] ata1.00: failed command: WRITE FPDMA QUEUED
[24137.903706] ata1.00: cmd 61/e0:88:88:d1:a4/04:00:50:00:00/40 tag 17 ncq dma 638976 out
                        res 40/00:88:88:d1:a4/00:00:50:00:00/40 Emask 0x10 (ATA bus error)
[24137.906120] ata1.00: status: { DRDY }
[24137.907343] ata1.00: failed command: READ FPDMA QUEUED
[24137.908521] ata1.00: cmd 60/00:90:20:3d:30/01:00:41:00:00/40 tag 18 ncq dma 131072 in
                        res 40/00:88:88:d1:a4/00:00:50:00:00/40 Emask 0x10 (ATA bus error)
[24137.910910] ata1.00: status: { DRDY }
[24137.912393] ata1.00: failed command: READ FPDMA QUEUED
[24137.913575] ata1.00: cmd 60/00:98:20:3e:30/01:00:41:00:00/40 tag 19 ncq dma 131072 in
                        res 40/00:88:88:d1:a4/00:00:50:00:00/40 Emask 0x10 (ATA bus error)
[24137.915975] ata1.00: status: { DRDY }
[24137.917145] ata1.00: failed command: READ FPDMA QUEUED
[24137.918318] ata1.00: cmd 60/f8:a0:58:fa:1f/03:00:1e:00:00/40 tag 20 ncq dma 520192 in
                        res 40/00:88:88:d1:a4/00:00:50:00:00/40 Emask 0x10 (ATA bus error)
[24137.920647] ata1.00: status: { DRDY }
[24137.921779] ata1: hard resetting link
[24138.398205] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[24138.398437] ata1.00: supports DRM functions and may not be fully accessible
[24138.400704] ata1.00: supports DRM functions and may not be fully accessible
[24138.402596] ata1.00: configured for UDMA/33
[24138.402609] sd 0:0:0:0: [sda] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[24138.402611] sd 0:0:0:0: [sda] tag#14 Sense Key : Illegal Request [current]
[24138.402613] sd 0:0:0:0: [sda] tag#14 Add. Sense: Unaligned write command
[24138.402615] sd 0:0:0:0: [sda] tag#14 CDB: Read(10) 28 00 1e 1f f2 58 00 03 f8 00
[24138.402617] blk_update_request: I/O error, dev sda, sector 505410136 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0
[24138.403852] sd 0:0:0:0: [sda] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[24138.403854] sd 0:0:0:0: [sda] tag#15 Sense Key : Illegal Request [current]
[24138.403855] sd 0:0:0:0: [sda] tag#15 Add. Sense: Unaligned write command
[24138.403857] sd 0:0:0:0: [sda] tag#15 CDB: Read(10) 28 00 1e 1f f6 58 00 04 00 00
[24138.403858] blk_update_request: I/O error, dev sda, sector 505411160 op 0x0:(READ) flags 0x80700 phys_seg 17 prio class 0
[24138.405027] sd 0:0:0:0: [sda] tag#18 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[24138.405028] sd 0:0:0:0: [sda] tag#18 Sense Key : Illegal Request [current]
[24138.405030] sd 0:0:0:0: [sda] tag#18 Add. Sense: Unaligned write command
[24138.405031] sd 0:0:0:0: [sda] tag#18 CDB: Read(10) 28 00 41 30 3d 20 00 01 00 00
[24138.405033] blk_update_request: I/O error, dev sda, sector 1093680416 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
[24138.406257] sd 0:0:0:0: [sda] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[24138.406260] sd 0:0:0:0: [sda] tag#19 Sense Key : Illegal Request [current]
[24138.406264] sd 0:0:0:0: [sda] tag#19 Add. Sense: Unaligned write command
[24138.406268] sd 0:0:0:0: [sda] tag#19 CDB: Read(10) 28 00 41 30 3e 20 00 01 00 00
[24138.406271] blk_update_request: I/O error, dev sda, sector 1093680672 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
[24138.407431] sd 0:0:0:0: [sda] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[24138.407432] sd 0:0:0:0: [sda] tag#20 Sense Key : Illegal Request [current]
[24138.407434] sd 0:0:0:0: [sda] tag#20 Add. Sense: Unaligned write command
[24138.407435] sd 0:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 1e 1f fa 58 00 03 f8 00
[24138.407436] blk_update_request: I/O error, dev sda, sector 505412184 op 0x0:(READ) flags 0x80700 phys_seg 35 prio class 0
[24138.408591] ata1: EH complete
[24138.408651] ata1.00: Enabling discard_zeroes_data
[24224.783095] ata1.00: exception Emask 0x0 SAct 0xe038 SErr 0x0 action 0x6
[24224.784280] ata1.00: irq_stat 0x40000008
[24224.785443] ata1.00: failed command: READ FPDMA QUEUED
[24224.786641] ata1.00: cmd 60/00:70:50:ec:73/01:00:3e:00:00/40 tag 14 ncq dma 131072 in
                        res 41/84:00:50:ec:73/00:01:3e:00:00/00 Emask 0x410 (ATA bus error) <F>
[24224.788940] ata1.00: status: { DRDY ERR }
[24224.790115] ata1.00: error: { ICRC ABRT }
[24224.791290] ata1: hard resetting link
[24225.266369] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[24225.266600] ata1.00: supports DRM functions and may not be fully accessible
[24225.268871] ata1.00: supports DRM functions and may not be fully accessible
[24225.270793] ata1.00: configured for UDMA/33
[24225.270811] sd 0:0:0:0: [sda] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[24225.270813] sd 0:0:0:0: [sda] tag#14 Sense Key : Aborted Command [current]
[24225.270815] sd 0:0:0:0: [sda] tag#14 Add. Sense: Scsi parity error
[24225.270818] sd 0:0:0:0: [sda] tag#14 CDB: Read(10) 28 00 3e 73 ec 50 00 01 00 00
[24225.270820] blk_update_request: I/O error, dev sda, sector 1047784528 op 0x0:(READ) flags 0x80700 phys_seg 17 prio class 0


Последнее исправление: d1m1trus (всего исправлений: 1)
← Система не определяет микрофон гарнитуры
Как работает Nvidia prime? →
Ответ на: комментарий от darkenshvein

Закончит компилить, проверю кабель, потом отключение ncq. Но в w10 все пулей летает, не думаю что в кабеле дело.

d1m1trus
() автор топика
Ответ на: комментарий от cocucka 
Disk /dev/sda: 931.53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: Samsung SSD 870
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: C0930FCF-3808-4E3E-80A6-11E5015D5369

Device      Start        End    Sectors   Size Type
/dev/sda1    2048     206847     204800   100M EFI System
/dev/sda2  206848 1953521663 1953314816 931.4G Linux filesystem

Раздел xfs создавал при установке штатной инсталяхой в ubuntu server.

d1m1trus
() автор топика
Ответ на: комментарий от cocucka 
meta-data=/dev/sda2              isize=512    agcount=4, agsize=61041088 blks
         =                       sectsz=512   attr=2, projid32bit=1
         =                       crc=1        finobt=1, sparse=1, rmapbt=0
         =                       reflink=1
data     =                       bsize=4096   blocks=244164352, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0, ftype=1
log      =internal log           bsize=4096   blocks=119220, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0
d1m1trus
() автор топика
Ответ на: комментарий от d1m1trus

Ну здесь у тебя пишет bsize=4096, а диск рапортует Sector size (logical/physical): 512 bytes / 512 bytes. Мне кажется, что у тебя фс с неправильным размером блоков создана. Поэтому оно ругается в логах и тормозит на выравнивании. Но может я и ошибаюсь т.к. число кратное.

cocucka ★★★★☆
()
Последнее исправление: cocucka (всего исправлений: 1)
Ответ на: комментарий от cocucka

большинство дисков рапортуют размер сектора 512, и при этом в большинстве фс размер блока 4096. так что укатывайся обратно в толксы со своими офигенными домыслами

anonymous
()
Ответ на: комментарий от anonymous

Не ругай меня анон, я просто сосиска, куда уж мне.

cocucka ★★★★☆
()
Ответ на: комментарий от cocucka

а привем тут размер блока ФС к размеру сектора носителя-то?… открою огромный секрет - блок (кластер) ФС может содержать и несколько секторов…

NiTr0 ★★★★★
()
Ответ на: комментарий от darkenshvein

Спасибки добрый человек! после этой команды скормил таки

echo 1 > /sys/block/sda/device/queue_depth

и о чудо… нету больше ошибок, а это если не ошибаюсь ncq off, dma on.

d1m1trus
() автор топика
Ответ на: комментарий от d1m1trus

Смотри альтернативы обычным командам написанных на расте на гитхабе. Есть очень интересные

anonymous
()
Ответ на: комментарий от darkenshvein

имя ему Samsung 8*0 EVO, у них какие-то траблы с линуксом как оказалось, без костылей не работают :( Мать Asus M5A97 R2.0 (sAM3+, AMD 970/SB950)

anonymous
()
Ответ на: комментарий от steemandlinux 
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge (rev 02)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0)
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 1)
00:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 3)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Juniper XT [Radeon HD 5770]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (                                                     rev 09)
03:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
04:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
d1m1trus
() автор топика
Ответ на: комментарий от d1m1trus

Всё нормально у тебя: AHCI mode

Видимо анонимус выше правильно говорит про конфликт устройств.

steemandlinux ★★★★★
()
Ответ на: комментарий от anonymous

Не факт, что в виндах всё видно. Тем более, как я понял, винда на отдельном диске.

turtle_bazon ★★★★★
()

А чего у тебя такой линк медленный?

ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
anonymous
()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.
← Система не определяет микрофон гарнитуры
Linux-hardware
Как работает Nvidia prime? →