LINUX.ORG.RU
Форум — Linux-hardware  

почему HP LaserJet pro 1102 не печатает из браузера?

 


0

1

первый раз ставлю принтер на Ubuntu, опыта нет
Принтер печатает из libreOffice, но НЕ печатает из браузера...
Я уже пробовал через hplip-gui плагин ставить (он нужен, кстати? При установке дров писал, что нужен... но печатает и без него).

в /var/log/cups/error_log выдаёт такое: 

I [11/Dec/2021:22:29:14 +0300] Expiring subscriptions...
D [11/Dec/2021:22:29:14 +0300] Closing client 46 after 900 seconds of inactivity.
D [11/Dec/2021:22:29:14 +0300] [Client 46] Closing connection.
D [11/Dec/2021:22:29:14 +0300] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [11/Dec/2021:22:29:16 +0300] [Client 50] POST / HTTP/1.1
D [11/Dec/2021:22:29:16 +0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=200, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] No authentication data provided.
D [11/Dec/2021:22:29:16 +0300] [Client 50] 2.0 CUPS-Get-Default 11
D [11/Dec/2021:22:29:16 +0300] CUPS-Get-Default
D [11/Dec/2021:22:29:16 +0300] CUPS-Get-Default client-error-not-found: No default printer.
D [11/Dec/2021:22:29:16 +0300] [Client 50] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost.
D [11/Dec/2021:22:29:16 +0300] [Client 50] Content-Length: 113
D [11/Dec/2021:22:29:16 +0300] [Client 50] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [11/Dec/2021:22:29:16 +0300] Expiring subscriptions...
D [11/Dec/2021:22:29:16 +0300] [Client 50] con->http=0x557ddec4d9c0
D [11/Dec/2021:22:29:16 +0300] [Client 50] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=113, response=0x557ddec7b970(IPP_STATE_DATA), pipe_pid=0, file=-1
D [11/Dec/2021:22:29:16 +0300] [Client 50] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [11/Dec/2021:22:29:16 +0300] [Client 50] bytes=0, http_state=0, data_remaining=113
D [11/Dec/2021:22:29:16 +0300] [Client 50] Flushing write buffer.
D [11/Dec/2021:22:29:16 +0300] [Client 50] New state is HTTP_STATE_WAITING
D [11/Dec/2021:22:29:16 +0300] [Client 50] Waiting for request.
D [11/Dec/2021:22:29:16 +0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [11/Dec/2021:22:29:16 +0300] [Client 50] POST / HTTP/1.1
D [11/Dec/2021:22:29:16 +0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=200, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] No authentication data provided.
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] 2.0 CUPS-Get-Printers 12
D [11/Dec/2021:22:29:16 +0300] CUPS-Get-Printers
D [11/Dec/2021:22:29:16 +0300] [Client 50] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [11/Dec/2021:22:29:16 +0300] [Client 50] Content-Length: 1324
D [11/Dec/2021:22:29:16 +0300] [Client 50] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [11/Dec/2021:22:29:16 +0300] [Client 50] con->http=0x557ddec4d9c0
D [11/Dec/2021:22:29:16 +0300] [Client 50] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1324, response=0x557ddec57100(IPP_STATE_DATA), pipe_pid=0, file=-1
D [11/Dec/2021:22:29:16 +0300] [Client 50] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [11/Dec/2021:22:29:16 +0300] [Client 50] bytes=0, http_state=0, data_remaining=1324
D [11/Dec/2021:22:29:16 +0300] [Client 50] Flushing write buffer.
D [11/Dec/2021:22:29:16 +0300] [Client 50] New state is HTTP_STATE_WAITING
D [11/Dec/2021:22:29:16 +0300] [Client 50] Waiting for request.
D [11/Dec/2021:22:29:16 +0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [11/Dec/2021:22:29:16 +0300] [Client 51] POST / HTTP/1.1
D [11/Dec/2021:22:29:16 +0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=200, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] No authentication data provided.
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 51] 2.0 CUPS-Get-Default 13
D [11/Dec/2021:22:29:16 +0300] CUPS-Get-Default
D [11/Dec/2021:22:29:16 +0300] CUPS-Get-Default client-error-not-found: No default printer.
D [11/Dec/2021:22:29:16 +0300] [Client 51] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost.
D [11/Dec/2021:22:29:16 +0300] [Client 51] Content-Length: 113
D [11/Dec/2021:22:29:16 +0300] [Client 51] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [11/Dec/2021:22:29:16 +0300] [Client 51] con->http=0x557ddec75ab0
D [11/Dec/2021:22:29:16 +0300] [Client 51] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=113, response=0x557ddec356d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [11/Dec/2021:22:29:16 +0300] [Client 51] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [11/Dec/2021:22:29:16 +0300] [Client 51] bytes=0, http_state=0, data_remaining=113
D [11/Dec/2021:22:29:16 +0300] [Client 51] Flushing write buffer.
D [11/Dec/2021:22:29:16 +0300] [Client 51] New state is HTTP_STATE_WAITING
D [11/Dec/2021:22:29:16 +0300] [Client 51] Waiting for request.
D [11/Dec/2021:22:29:16 +0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [11/Dec/2021:22:29:16 +0300] [Client 50] POST /printers/HP_LaserJet_Professional_P1102 HTTP/1.1
D [11/Dec/2021:22:29:16 +0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=200, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] No authentication data provided.
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=100, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] 2.0 Get-Printer-Attributes 14
D [11/Dec/2021:22:29:16 +0300] Get-Printer-Attributes ipp://localhost/printers/HP_LaserJet_Professional_P1102
D [11/Dec/2021:22:29:16 +0300] [Client 50] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/HP_LaserJet_Professional_P1102) from localhost.
D [11/Dec/2021:22:29:16 +0300] [Client 50] Content-Length: 12522
D [11/Dec/2021:22:29:16 +0300] [Client 50] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [11/Dec/2021:22:29:16 +0300] [Client 50] con->http=0x557ddec4d9c0
D [11/Dec/2021:22:29:16 +0300] [Client 50] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=12522, response=0x557ddebb5820(IPP_STATE_DATA), pipe_pid=0, file=-1
D [11/Dec/2021:22:29:16 +0300] [Client 50] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [11/Dec/2021:22:29:16 +0300] [Client 50] bytes=0, http_state=0, data_remaining=12522
D [11/Dec/2021:22:29:16 +0300] [Client 50] Flushing write buffer.
D [11/Dec/2021:22:29:16 +0300] [Client 50] New state is HTTP_STATE_WAITING
D [11/Dec/2021:22:29:16 +0300] [Client 50] Waiting for request.
D [11/Dec/2021:22:29:16 +0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [11/Dec/2021:22:29:16 +0300] [Client 50] POST / HTTP/1.1
D [11/Dec/2021:22:29:16 +0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [11/Dec/2021:22:29:16 +0300] [Client 50] Read: status=200, state=6
D [11/Dec/2021:22:29:16 +0300] [Client 50] No authentication data provided.
D [11/Dec/2021:22:29:16 +0300] [Client 50] 2.0 Get-Printer-Attributes 15
D [11/Dec/2021:22:29:16 +0300] Get-Printer-Attributes ipp://localhost/printers/HP_LaserJet_Professional_P1102
D [11/Dec/2021:22:29:16 +0300] [Client 50] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/HP_LaserJet_Professional_P1102) from localhost.
D [11/Dec/2021:22:29:16 +0300] [Client 50] Content-Length: 101
D [11/Dec/2021:22:29:16 +0300] [Client 50] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [11/Dec/2021:22:29:16 +0300] [Client 50] con->http=0x557ddec4d9c0
D [11/Dec/2021:22:29:16 +0300] [Client 50] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=101, response=0x557ddecb9300(IPP_STATE_DATA), pipe_pid=0, file=-1
D [11/Dec/2021:22:29:16 +0300] [Client 50] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [11/Dec/2021:22:29:16 +0300] [Client 50] bytes=0, http_state=0, data_remaining=101
D [11/Dec/2021:22:29:16 +0300] [Client 50] Flushing write buffer.
D [11/Dec/2021:22:29:16 +0300] [Client 50] New state is HTTP_STATE_WAITING
D [11/Dec/2021:22:29:16 +0300] [Client 50] Waiting for request.
D [11/Dec/2021:22:29:16 +0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [11/Dec/2021:22:29:16 +0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [11/Dec/2021:22:29:16 +0300] [Client 54] Server address is "[v1.::1]".
D [11/Dec/2021:22:29:16 +0300] [Client 54] Accepted from localhost:54364 (IPv6)
D [11/Dec/2021:22:29:16 +0300] [Client 54] Waiting for request.
D [11/Dec/2021:22:29:16 +0300] [Client 54] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [11/Dec/2021:22:29:16 +0300] [Client 54] Closing connection.
D [11/Dec/2021:22:29:16 +0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [11/Dec/2021:22:29:16 +0300] [Client 50] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [11/Dec/2021:22:29:16 +0300] [Client 50] Closing connection.
D [11/Dec/2021:22:29:16 +0300] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [11/Dec/2021:22:29:17 +0300] Expiring subscriptions...
D [11/Dec/2021:22:29:18 +0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [11/Dec/2021:22:29:18 +0300] [Client 55] Server address is "/run/cups/cups.sock".
D [11/Dec/2021:22:29:18 +0300] [Client 55] Accepted from localhost (Domain)
D [11/Dec/2021:22:29:18 +0300] [Client 55] Waiting for request.
I [11/Dec/2021:22:29:18 +0300] Expiring subscriptions...
D [11/Dec/2021:22:29:18 +0300] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [11/Dec/2021:22:29:18 +0300] [Client 56] Server address is "/run/cups/cups.sock".
D [11/Dec/2021:22:29:18 +0300] [Client 56] Accepted from localhost (Domain)
D [11/Dec/2021:22:29:18 +0300] [Client 56] Waiting for request.
D [11/Dec/2021:22:29:18 +0300] [Client 55] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [11/Dec/2021:22:29:18 +0300] [Client 55] Closing connection.
D [11/Dec/2021:22:29:18 +0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [11/Dec/2021:22:29:18 +0300] [Client 56] POST / HTTP/1.1
D [11/Dec/2021:22:29:18 +0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=200, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] No authentication data provided.
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] Read: status=100, state=6
D [11/Dec/2021:22:29:18 +0300] [Client 56] 2.0 CUPS-Get-Printers 1
D [11/Dec/2021:22:29:18 +0300] CUPS-Get-Printers
D [11/Dec/2021:22:29:18 +0300] [Client 56] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [11/Dec/2021:22:29:18 +0300] [Client 56] Content-Length: 995
D [11/Dec/2021:22:29:18 +0300] [Client 56] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [11/Dec/2021:22:29:18 +0300] [Client 56] con->http=0x557ddec62540
D [11/Dec/2021:22:29:18 +0300] [Client 56] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=995, response=0x557ddec7b970(IPP_STATE_DATA), pipe_pid=0, file=-1
D [11/Dec/2021:22:29:18 +0300] [Client 56] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [11/Dec/2021:22:29:18 +0300] [Client 56] bytes=0, http_state=0, data_remaining=995
D [11/Dec/2021:22:29:18 +0300] [Client 56] Flushing write buffer.
D [11/Dec/2021:22:29:18 +0300] [Client 56] New state is HTTP_STATE_WAITING
D [11/Dec/2021:22:29:18 +0300] [Client 56] Waiting for request.
D [11/Dec/2021:22:29:18 +0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [11/Dec/2021:22:29:18 +0300] [Client 56] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [11/Dec/2021:22:29:18 +0300] [Client 56] Closing connection.
D [11/Dec/2021:22:29:18 +0300] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [11/Dec/2021:22:29:19 +0300] Expiring subscriptions...


Последнее исправление: tip78 (всего исправлений: 2)
← Перестали видеться события power-management'а
Драйверы Intel UHD 630 в Astra Linux 1.5 Smolensk →

он нужен, кстати?

Использование HPLIP рекомендуется для большинства принтеров HP inkjet и laserjet. Т.е. имеет смысл сначала его поставить и проверить.

D [11/Dec/2021:22:29:16 +0300] [Client 54] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [11/Dec/2021:22:29:16 +0300] [Client 54] Closing connection.

Такие сообщения в логе могут указывать на проблемы с портами: CUPS и iptables, https://forum.ubuntu.ru/index.php?topic=284074.0

В состав HPLIP вроде утилита hp-check, которая может дать более детальную информацию по проблеме.

PhysShell ★★
()

Сохраняйте печать в pdf, печатайте pdf из просмотрщика

xDShot ★★★★★
()

У тебя наверно какой-то браузер из SNAP или Flatpak со всей этой изоляцией

Каштан.

anonymous
()

HP 1102(w) требует загрузки проприетарного «плагина» (это может сделать сам hplip, скачав и установив блоб автоматически) и прошивки для печати, либо использования реверс-инженированного драйвера foo2zjs.

Рекомендую foo2zjs. Раньше несколько лет использовали в офисе для 1102w. Полет нормальный.

anonymous
()
Ответ на: комментарий от PhysShell

В состав HPLIP вроде утилита hp-check, которая может дать более детальную информацию по проблеме.

что-то нашёл... 

-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.21.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro  21.10 version

-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible 
error: 'libdbus-1-dev' package is missing/incompatible 
error: 'libjpeg-dev' package is missing/incompatible 
error: 'libcups2-dev' package is missing/incompatible 
error: 'cups-bsd' package is missing/incompatible 
error: 'cups-client' package is missing/incompatible 
error: 'libcupsimage2-dev' package is missing/incompatible 
error: 'libusb-1.0.0-dev' package is missing/incompatible 
error: 'libusb-0.1-4' package is missing/incompatible 
error: 'libsane-dev' package is missing/incompatible 
error: 'libavahi-client-dev' package is missing/incompatible 
error: 'libavahi-core-dev' package is missing/incompatible 
error: 'libavahi-common-dev' package is missing/incompatible 
error: 'libsnmp-dev' package is missing/incompatible 
error: 'snmp-mibs-downloader' package is missing/incompatible 
error: 'openssl' package is missing/incompatible 
error: 'python3-dev' package is missing/incompatible 
error: 'libtool' package is missing/incompatible 
error: 'libtool-bin' package is missing/incompatible 

Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible 
error: 'xsane' package is missing/incompatible 

Total Errors: 15
Total Warnings: 2


error: libcrypto     libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.1.1           MISSING    'libcrypto needs to be installed'
# apt install libcrypto
Чтение списков пакетов… Готово
Построение дерева зависимостей… Готово
Чтение информации о состоянии… Готово         
E: Невозможно найти пакет libcrypto

# apt-cache search libcrypto
libssl-dev - Secure Sockets Layer toolkit - development files
libssl-doc - Secure Sockets Layer toolkit - development documentation
libssl1.1 - Secure Sockets Layer toolkit - shared libraries
android-libcrypto-utils - Android crypto-utils library
android-libcrypto-utils-dev - Android crypto-utils library - Development files
libcrypto++-dev - General purpose cryptographic library - C++ development
libcrypto++-doc - General purpose cryptographic library - documentation
libcrypto++-utils - General purpose cryptographic library - utilities and data files
libcrypto++8 - General purpose cryptographic library - shared library
libcrypto-equality-clojure - Clojure library protecting against timing attacks
libcrypto-random-clojure - secure random generator for Clojure
libcryptokit-ocaml - cryptographic algorithm library for OCaml - runtime
libcryptokit-ocaml-dev - cryptographic algorithm library for OCaml - development
libcryptominisat5-5.8 - SAT solver library
libcryptominisat5-dev - development files for the CryptoMiniSat SAT solver
r-cran-openssl - GNU R toolkit for encryption, signatures and certificates based on OpenSSL
root@rauza-comp:/usr/share/hplip/prnt/plugins#

и какой ему нужон, например?

а он точно в адеквате? 

# apt install libcups2
Чтение списков пакетов… Готово
Построение дерева зависимостей… Готово
Чтение информации о состоянии… Готово         
Уже установлен пакет libcups2 самой новой версии (2.3.3op2-7ubuntu2).
libcups2 помечен как установленный вручную.
Обновлено 0 пакетов, установлено 0 новых пакетов, для удаления отмечено 0 пакетов, и 0 пакетов не обновлено.

если ему версия не годится, то что делать?

tip78
() автор топика
Последнее исправление: tip78 (всего исправлений: 3)
Ответ на: комментарий от tip78

браузер - FF

а как он установлен?! насколько помню, в бубунте сейчас модно всё прикладное ПО пихать в снапы/флаки/какие-то песочницы-контейнеры. всё это замечательно (и забота о простом юзере, и безопасность, и т.д, и т.п. )… но некоторый привычный функционал может быть недосягаем

строка запуска какая у твоего FF? в свойствах ярлыка/значка, например

anonymous
()
Ответ на: комментарий от anonymous

ну установлен он, прямо скажем, как-то совсем поибанутому...
потому что я не могу через «открыть файл» зайти даже в /usr, который 755...
и распечатать из браузера ничего не могу
и вообще в диру зайти не могу, в которую захожу легко из консоли под юзером
ну т.е., если дира user:user 755, то могу, а если root:root 755, то нет

snap и есть...
_firefox.desktop /snap/bin/firefox %u

надо наверное деинсталлировать родной и поставить с firefox.com

tip78
() автор топика
Последнее исправление: tip78 (всего исправлений: 3)
Ответ на: комментарий от tip78

можно попробовать доустановить libssl-dev , но что-то мне подсказывает, что hp-check хочет видеть =другую= версию ОС , так как слово incompatible он не просто так выводит

anonymous
()
Ответ на: комментарий от tip78

ничего ждать не надо, доустанови libssl-dev и запусти заново hp-check - что он скажет насчёт libcrypto на сей раз

ps я и имел ввиду не 20.04 , а 14.04 или ранее, смотря когда у тебя принтер был произведён

anonymous
()
Ответ на: комментарий от anonymous

одной ошибкой меньше

libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -

Total Errors: 14
Total Warnings: 2

tip78
() автор топика
Последнее исправление: tip78 (всего исправлений: 1)

Принтер печатает из libreOffice, но НЕ печатает из браузера...
давай попробуем печатать из оперы, таким образом узнаем, виноват firefox из snap или нет
вот тебе пакет - https://deb.opera.com/opera-stable/pool/non-free/o/opera-stable/


если из-под оперы будет печатать, значит выкорчёвываешь снап firefox'а и ставишь его пакет - https://packages.ubuntu.com/impish-updates/amd64/firefox/download

anonymous
()
Ответ на: комментарий от anonymous

да тут и без оперы понятно, что с фф что-то не так, по вышеописанным симптомам
я его уже выкорчевал.

вопрос: вот из этого, что можно безпроблемно удалить, чтобы избавиться от snap (гном не юзаю, сижу в кедах)? 

$ snap list
Name               Version             Rev    Tracking         Publisher   Notes
bare               1.0                 5      latest/stable    canonical✓  base
core               16-2.52.1           11993  latest/stable    canonical✓  core
core20             20211129            1270   latest/stable    canonical✓  base
gnome-3-38-2004    0+git.cd626d1       87     latest/stable/…  canonical✓  -
gtk-common-themes  0.1-59-g7bca6ae     1519   latest/stable/…  canonical✓  -
snap-store         3.38.0-66-gbd5b8f7  558    latest/stable/…  canonical✓  -

tip78
() автор топика
Ответ на: комментарий от tip78

как минимум - в kubuntu почти нету гномовского барахла
как максимум - мейнтейнер kubuntu имеет квалификацию выше твоей

anonymous
()
Ответ на: комментарий от tip78

оттуда ты будешь качать со скоростью своего тарифа, а с зеркала ты будешь качать на максимальной скорости своего канала (в случае оптики получается в 10 и более раз быстрее)

anonymous
()
Ответ на: комментарий от anonymous

firefox от Ubuntu то, оказывается, уже стоял...
просто один ярлык запускался через snap, а другой нормально
и вот нормальный то:
- и запускается быстрее (тот секунд 8 тупил)
- и в папки заходит
- и ПЕЧАТАЕТ!!1

гоните snap ссаными тряпками!

tip78
() автор топика
Последнее исправление: tip78 (всего исправлений: 2)
Ответ на: комментарий от tip78

гоните snap ссаными тряпками!

не готовы юзеры к заботе* о себе, ещё не готовы ;))

anonymous
()
Ответ на: комментарий от tip78

В snap через snap-store можно разрешения выдавать. Скорее всего, просто из соображений безопасности отключили возможность печати.

Vsevolod-linuxoid ★★★★★
()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.
← Перестали видеться события power-management'а
Linux-hardware
Драйверы Intel UHD 630 в Astra Linux 1.5 Smolensk →