Всем привет! Fedora 39 и веб-камера Logitech Brio 4K. Не работает ни камера ни ее микрофон. Как будто устройство не подключено, ее не видно в Линуксе. Хотя на этом компьютере стоит Windows 10 и камера там без проблем работает. Камера подключена в разъем USB 3.0. На форуме Fedora мне с этой проблемой не помогли. Однако и на этом форуме и на форуме Федора я находил темы, что данная камера в Линуксе работает , даже у кого-то из коробки(Веб-камера под Linux (комментарий))
ls -l /dev/ | grep video
Ничего не выводится..
lsusb
Bus 001 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
uname -r
6.7.6-200.fc39.x86_64
hwinfo --usb
05: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: uIhY.TiQAvTU26X7
SysFS ID: /devices/pci0000:00/0000:00:1c.7/0000:07:00.0/usb3/3-0:1.0
SysFS BusID: 3-0:1.0
Hardware Class: hub
Model: "Linux Foundation 3.0 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0003 "3.0 root hub"
Revision: "6.07"
Serial ID: "0000:07:00.0"
Driver: "hub"
Module Alias: "usb:v1D6Bp0003d0607dc09dsc00dp03ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
06: USB 00.0: 10800 Keyboard
[Created at usb.122]
Unique ID: VBUu.+P1SsGCg4n7
Parent ID: ADDn.4Nx_qoDfSd7
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0
SysFS BusID: 1-1.5:1.0
Hardware Class: keyboard
Model: "Logitech Keyboard K120"
Hotplug: USB
Vendor: usb 0x046d "Logitech, Inc."
Device: usb 0xc31c "Keyboard K120"
Revision: "64.00"
Driver: "usbhid"
Device File: /dev/input/event2
Device Files: /dev/input/event2, /dev/input/by-path/pci-0000:00:1d.0-usbv2-0:1.5:1.0-event-kbd, /dev/input/by-id/usb-Logitech_USB_Keyboard-event-kbd, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.5:1.0-event-kbd
Device Number: char 13:66
Speed: 1.5 Mbps
Module Alias: "usb:v046DpC31Cd6400dc00dsc00dp00ic03isc01ip01in00"
Driver Info #0:
XkbRules: xfree86
XkbModel: pc104
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #11 (Hub)
07: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: zPk0.FHd55n4xKo7
SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb4/4-0:1.0
SysFS BusID: 4-0:1.0
Hardware Class: hub
Model: "Linux Foundation 2.0 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0002 "2.0 root hub"
Revision: "6.07"
Serial ID: "0000:00:1a.0"
Driver: "hub"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0607dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
08: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: k4bc.oLWCeziExdF
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux Foundation 2.0 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0002 "2.0 root hub"
Revision: "6.07"
Serial ID: "0000:00:1d.0"
Driver: "hub"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0607dc09dsc00dp00ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
09: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: PYMB.4Nx_qoDfSd7
Parent ID: zPk0.FHd55n4xKo7
SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb4/4-1/4-1:1.0
SysFS BusID: 4-1:1.0
Hardware Class: hub
Model: "Intel Integrated Rate Matching Hub"
Hotplug: USB
Vendor: usb 0x8087 "Intel Corp."
Device: usb 0x0024 "Integrated Rate Matching Hub"
Driver: "hub"
Speed: 480 Mbps
Module Alias: "usb:v8087p0024d0000dc09dsc00dp01ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #7 (Hub)
10: USB 00.1: 0000 Unclassified device
[Created at usb.122]
Unique ID: yMky.kW6cDp+F+p1
Parent ID: ADDn.4Nx_qoDfSd7
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.1
SysFS BusID: 1-1.5:1.1
Hardware Class: unknown
Model: "Logitech Keyboard K120"
Hotplug: USB
Vendor: usb 0x046d "Logitech, Inc."
Device: usb 0xc31c "Keyboard K120"
Revision: "64.00"
Driver: "usbhid"
Device File: /dev/input/event3
Device Number: char 13:67
Speed: 1.5 Mbps
Module Alias: "usb:v046DpC31Cd6400dc00dsc00dp00ic03isc00ip00in01"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #11 (Hub)
11: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: ADDn.4Nx_qoDfSd7
Parent ID: k4bc.oLWCeziExdF
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0
SysFS BusID: 1-1:1.0
Hardware Class: hub
Model: "Intel Integrated Rate Matching Hub"
Hotplug: USB
Vendor: usb 0x8087 "Intel Corp."
Device: usb 0x0024 "Integrated Rate Matching Hub"
Driver: "hub"
Speed: 480 Mbps
Module Alias: "usb:v8087p0024d0000dc09dsc00dp01ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #8 (Hub)
12: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: pBe4.aMIzSWiMAJE
SysFS ID: /devices/pci0000:00/0000:00:1c.7/0000:07:00.0/usb2/2-0:1.0
SysFS BusID: 2-0:1.0
Hardware Class: hub
Model: "Linux Foundation 2.0 root hub"
Hotplug: USB
Vendor: usb 0x1d6b "Linux Foundation"
Device: usb 0x0002 "2.0 root hub"
Revision: "6.07"
Serial ID: "0000:07:00.0"
Driver: "hub"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0607dc09dsc00dp01ic09isc00ip00in00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GF116 [GeForce GTX 550 Ti] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio Controller (rev a1)
03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 01)
04:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
06:00.0 IDE interface: Marvell Technology Group Ltd. 88SE912x SATA 6Gb/s Controller [IDE mode] (rev 12)
06:00.1 IDE interface: Marvell Technology Group Ltd. 88SE912x IDE Controller (rev 12)
07:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
Я предположил, что т.к. компьютер достаточно старый(13лет), то просто не работает разъем USB 3.0 в линуксе, вставил флешку Линукс ее видит.
Также при установке Fedora 39, были проблемы с графикой nvidia(из-за того, что видеокарта старая), пришлось устанавливать Fedora в режиме «troubleshooting», поэтому возможно Fedora не загружает какие-то модули ядра, например я нашел, что у других эта камера работает с модулем uvcvideo, однако через lsmod я не нашел подключенный этот модуль. Я подключил:
sudo depmod
sudo modprobe -v uvcvideo
Модуль подключился, но камера не заработала. Может ещё какой-нибудь модуль нужно подключить? Спасибо.
