LINUX.ORG.RU

Проблемма с 4х канальной картой видеозахвата Orient HW-504


0

0

Добрый день! Проблемма в следующем: Нодо построить видеорегистратор на базе PC. Купил карту Orient HW-504 (аналог Howell HW-404M7) на 4х чипах SAA7134, установил в систему: P-2.8, Intel865G, OS Debian Etch v4.0r0 В результате вижу следующее:

Dec 25 01:43:21 DELL-50 kernel: PCI Interrupt 0000:02:0c.0[A] -> GSI 17 (level, low) -> IRQ 201

Dec 25 01:43:21 DELL-50 kernel: saa7130[0]: found at 0000:02:0c.0, rev: 1, irq: 201, latency: 64, mmio: 0xfe9ff000

Dec 25 01:43:21 DELL-50 kernel: saa7134: <rant>

Dec 25 01:43:21 DELL-50 kernel: saa7134: Congratulations! Your TV card vendor saved a few

Dec 25 01:43:21 DELL-50 kernel: saa7134: cents for a eeprom, thus your pci board has no

Dec 25 01:43:21 DELL-50 kernel: saa7134: subsystem ID and I can't identify it automatically

Dec 25 01:43:21 DELL-50 kernel: saa7134: </rant>

Dec 25 01:43:21 DELL-50 kernel: saa7134: I feel better now. Ok, here are the good news:

Dec 25 01:43:21 DELL-50 kernel: saa7134: You can use the card=<nr> insmod option to specify

Dec 25 01:43:21 DELL-50 kernel: saa7134: which board do you have. The list:

Dec 25 01:43:21 DELL-50 kernel: saa7134: card=0 -> UNKNOWN/GENERIC

. . Список card=1, 2,... .

Dec 25 01:43:21 DELL-50 kernel: saa7134: card=95 -> LifeView FlyVIDEO3000 (NTSC) 5169:0138

Dec 25 01:43:21 DELL-50 kernel: saa7130[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected]

Dec 25 01:43:21 DELL-50 kernel: saa7130[0]: board init: gpio is 1fc00

Dec 25 01:43:21 DELL-50 kernel: saa7130[0]: Huh, no eeprom present (err=-5)?

Dec 25 01:43:21 DELL-50 kernel: saa7130[0]: registered device video0 [v4l2]

Dec 25 01:43:21 DELL-50 kernel: saa7130[0]: registered device vbi0

Dec 25 01:43:21 DELL-50 kernel: ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 18 (level, low) -> IRQ 169

Dec 25 01:43:21 DELL-50 kernel: saa7130[1]: found at 0000:02:0d.0, rev: 1, irq: 169, latency: 64, mmio: 0xfe9ff400

Dec 25 01:43:21 DELL-50 kernel: saa7134: <rant>

Dec 25 01:43:21 DELL-50 kernel: saa7134: Congratulations! Your TV card vendor saved a few

Dec 25 01:43:21 DELL-50 kernel: saa7134: cents for a eeprom, thus your pci board has no

Dec 25 01:43:21 DELL-50 kernel: saa7134: subsystem ID and I can't identify it automatically

Dec 25 01:43:21 DELL-50 kernel: saa7134: </rant>

Dec 25 01:43:21 DELL-50 kernel: saa7134: I feel better now. Ok, here are the good news:

Dec 25 01:43:21 DELL-50 kernel: saa7134: You can use the card=<nr> insmod option to specify

Dec 25 01:43:21 DELL-50 kernel: saa7134: which board do you have. The list:

Dec 25 01:43:21 DELL-50 kernel: saa7134: card=0 -> UNKNOWN/GENERIC

. . Список card=1, 2,... .

Dec 25 01:43:21 DELL-50 kernel: saa7134: card=95 -> LifeView FlyVIDEO3000 (NTSC) 5169:0138

Dec 25 01:43:21 DELL-50 kernel: saa7130[1]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected]

Dec 25 01:43:21 DELL-50 kernel: saa7130[1]: board init: gpio is 10000

Dec 25 01:43:21 DELL-50 kernel: saa7130[1]: Huh, no eeprom present (err=-5)?

Dec 25 01:43:21 DELL-50 kernel: saa7130[1]: registered device video1 [v4l2]

Dec 25 01:43:21 DELL-50 kernel: saa7130[1]: registered device vbi1

Dec 25 01:43:21 DELL-50 kernel: ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 19 (level, low) -> IRQ 185

Dec 25 01:43:21 DELL-50 kernel: saa7130[2]: found at 0000:02:0e.0, rev: 1, irq: 185, latency: 64, mmio: 0xfe9ff800

Dec 25 01:43:21 DELL-50 kernel: saa7134: <rant>

Dec 25 01:43:21 DELL-50 kernel: saa7134: Congratulations! Your TV card vendor saved a few

Dec 25 01:43:21 DELL-50 kernel: saa7134: cents for a eeprom, thus your pci board has no

Dec 25 01:43:21 DELL-50 kernel: saa7134: subsystem ID and I can't identify it automatically

Dec 25 01:43:21 DELL-50 kernel: saa7134: </rant>

Dec 25 01:43:21 DELL-50 kernel: saa7134: I feel better now. Ok, here are the good news:

Dec 25 01:43:21 DELL-50 kernel: saa7134: You can use the card=<nr> insmod option to specify

Dec 25 01:43:21 DELL-50 kernel: saa7134: which board do you have. The list:

Dec 25 01:43:21 DELL-50 kernel: saa7134: card=0 -> UNKNOWN/GENERIC

. .Список card=1, 2,... .

Dec 25 01:43:21 DELL-50 kernel: saa7134: card=95 -> LifeView FlyVIDEO3000 (NTSC) 5169:0138

Dec 25 01:43:21 DELL-50 kernel: saa7130[2]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected]

Dec 25 01:43:21 DELL-50 kernel: saa7130[2]: board init: gpio is 10000

Dec 25 01:43:21 DELL-50 kernel: saa7130[2]: Huh, no eeprom present (err=-5)?

Dec 25 01:43:21 DELL-50 kernel: saa7130[2]: registered device video2 [v4l2]

Dec 25 01:43:21 DELL-50 kernel: saa7130[2]: registered device vbi2

Dec 25 01:43:21 DELL-50 kernel: ACPI: PCI Interrupt 0000:02:0f.0[A] -> GSI 16 (level, low) -> IRQ 177

Dec 25 01:43:21 DELL-50 kernel: saa7130[3]: found at 0000:02:0f.0, rev: 1, irq: 177, latency: 64, mmio: 0xfe9ffc00

Dec 25 01:43:21 DELL-50 kernel: saa7134: <rant>

Dec 25 01:43:21 DELL-50 kernel: saa7134: Congratulations! Your TV card vendor saved a few

Dec 25 01:43:21 DELL-50 kernel: saa7134: cents for a eeprom, thus your pci board has no

Dec 25 01:43:21 DELL-50 kernel: saa7134: subsystem ID and I can't identify it automatically

Dec 25 01:43:21 DELL-50 kernel: saa7134: </rant>

Dec 25 01:43:21 DELL-50 kernel: saa7134: I feel better now. Ok, here are the good news:

Dec 25 01:43:21 DELL-50 kernel: saa7134: You can use the card=<nr> insmod option to specify

Dec 25 01:43:21 DELL-50 kernel: saa7134: which board do you have. The list:

Dec 25 01:43:21 DELL-50 kernel: saa7134: card=0 -> UNKNOWN/GENERIC

. .Список card=1, 2,... .

Dec 25 01:43:21 DELL-50 kernel: saa7134: card=95 -> LifeView FlyVIDEO3000 (NTSC) 5169:0138

Dec 25 01:43:21 DELL-50 kernel: saa7130[3]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected]

Dec 25 01:43:21 DELL-50 kernel: saa7130[3]: board init: gpio is 10000

Dec 25 01:43:21 DELL-50 kernel: saa7130[3]: Huh, no eeprom present (err=-5)?

Dec 25 01:43:21 DELL-50 kernel: saa7130[3]: registered device video3 [v4l2]

Dec 25 01:43:21 DELL-50 kernel: saa7130[3]: registered device vbi3

Пробовал все, что нашел в Gogle, прошерстил сайт video4linux (насколько позволяет мой скромный английский) и ничего... Надеюсь на Вашу помощь, о всезнающий ALL! Совсем забыл, в качестве видеосервера используется ZoneMinder.

PS Прошу учесть, в Linux я новичек.

PPS Другие дистрибутивы, кроме Debian не предлагать.


Дополнительно: Информация из виндозного драйвера

VEN_1131 DEV_7130 SUBSYS_00001131 REV_01

[Strings] HAWELL="SAA7130" SAA.VideoDeviceDesc="HAWELL M7 7.6 Video capture device"

THK
() автор топика
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.