айптек мегакам 1.3 цыфровая мыльница

Итак опять я со своим цифровым фотоаппаратом aiptek 1.3 megacam (SPCA504a) которого никак под линухь пахать не заставлю - производители,скоты, под линух драйвера не дают,и не собираются...впредь буду смотреть :(((
так вот,по совету поставил gphoto 2.1.1 и обнаружил что всё равно ниччё не работает...то есть камера вроде как детектиться:

[root@draco /]# gphoto2 --auto-detect --get-all-raw-data
Model                          Port
----------------------------------------------------------
Aiptek Pencam                  usb:
*** Error (-1: 'Unspecified error') ***

For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
developer mailing list <gphoto-devel@gphoto.org>, please run
gphoto2 as follows:

    env LANG=C gphoto2 --debug --auto-detect --get-all-raw-data

Please make sure there is sufficient quoting around the arguments.

[root@draco /]#

0.000343 main(2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES
 TO THE MAILING LIST:
0.000562 main(2): gphoto2 2.1.1
0.000634 main(2): gphoto2 has been compiled with the following options:
0.000703 main(2):  + i586-mandrake-linux-gnu-gcc (C compiler used)
0.000771 main(2):  + popt (for handling command-line parameters)
0.000840 main(2):  + exif (for displaying EXIF information)
0.000908 main(2):  + cdk (for accessing configuration options)
0.000976 main(2):  + aa (for displaying live previews)
0.001044 main(2):  + jpeg (for displaying live previews in JPEG format)
0.001113 main(2):  + readline (for easy navigation in the shell)
0.001201 main(2): libgphoto2 2.1.1
0.001275 main(2): libgphoto2 has been compiled with the following options:
0.001345 main(2):  + i586-mandrake-linux-gnu-gcc (C compiler used)
0.001413 main(2):  + EXIF (for special handling of EXIF files)
0.001481 main(2):  + no ltdl (working around bugg libltdl, eh? :-)
0.001549 main(2):  + /proc/meminfo (adapts cache size to memory available)
0.001632 main(2): libgphoto2_port 0.5.1
0.001704 main(2): libgphoto2_port has been compiled with the following options:
0.001773 main(2):  + i586-mandrake-linux-gnu-gcc (C compiler used)
0.001841 main(2):  + USB (for USB cameras)
0.001841 main(2):  + USB (for USB cameras)
0.001911 main(2):  + serial (for serial cameras)
0.001979 main(2):  + no baudboy (serial port locking)
0.002047 main(2):  + no ttylock (serial port locking)
0.002115 main(2):  + no lockdev (serial port locking)
0.002183 main(2):  + no ltdl (working around bugg libltdl, eh? :-)
0.002446 main(2): The user has not specified both a model and a port. Try to fig
ure them out.
0.002591 gp-port-info-list(2): Loading io-drivers from '/usr/lib/gphoto2_port/0.
5.1'...
3.209183 gphoto2-port-usb(1): Looking for USB device (vendor 0x4fc, product 0x50
4a)... found.
3.209261 gphoto2-port-usb(1): Detected defaults: config 1, interface 0, altsetti
ng 0, inep ffffffff, outep ffffffff, intep ffffffff
3.209339 gphoto2-abilities-list.c(2): Found 'Aiptek Pencam' (0x4fc,0x504a)
3.209449 gphoto2-port(2): Freeing port...
3.209535 gphoto2-port(2): Closing port...
3.209784 gphoto2-camera(2): Setting abilities ('Aiptek Pencam')...
3.209889 setting/gphoto2-setting.c(2): Creating $HOME/.gphoto
3.227527 setting/gphoto2-setting.c(2): Loading settings from file "/root/.gphoto
/settings"
3.227750 gphoto2-setting(2): Setting key 'model' to value 'Aiptek Pencam' (gphot
o2)
3.227851 gphoto2-setting(2): Saving 2 setting(s) to file "/root/.gphoto/settings
"
3.228300 gp-port-info-list(2): Loading io-drivers from '/usr/lib/gphoto2_port/0.
5.1'...
7.528743 gphoto2-camera(2): Setting port info for port 'Universal Serial Bus' at
 'usb:'...
7.530217 gphoto2-port(2): Setting timeout to 5000 millisecond(s)...
7.530311 gphoto2-port(2): Setting settings...
7.530381 gphoto2-setting(2): Setting key 'port' to value 'usb:' (gphoto2)
7.530469 gphoto2-setting(2): Saving 2 setting(s) to file "/root/.gphoto/settings
"
7.531371 foreach(2): Executing action 'List Files' for folder '/'.
7.531529 gphoto2-camera(2): Listing files in '/'...
7.531672 gphoto2-camera(2): Initializing camera...
7.531803 gphoto2-port-usb(1): Looking for USB device (vendor 0x4fc, product 0x50
4a)... found.
7.531891 gphoto2-port-usb(1): Detected defaults: config 1, interface 0, altsetti
ng 0, inep ffffffff, outep ffffffff, intep ffffffff
7.531972 gphoto2-camera(2): Loading '/usr/lib/gphoto2/2.1.1/libgphoto2_spca504_f
lash.so'...
7.532408 gphoto2-port(2): Opening USB port...
7.532649 gphoto2-port(2): Setting settings...
7.534602 gphoto2-port-usb(2): Changed usb.config from -1 to 1
7.536299 gphoto2-port-usb(2): Changed usb.altsetting from -1 to 0
7.536425 gphoto2-port(2): Writing message (request=0x0 value=0x0 index=0x2000 si
ze=0=0x0)...
7.536542 gphoto2-port(3): No hexdump (NULL buffer)
7.538297 gphoto2-port(2): Writing message (request=0x0 value=0x13 index=0x2301 s
ize=0=0x0)...
7.538384 gphoto2-port(3): No hexdump (NULL buffer)
7.540295 gphoto2-port(2): Writing message (request=0x0 value=0x1 index=0x2883 si
ze=0=0x0)...
7.540380 gphoto2-port(3): No hexdump (NULL buffer)
7.542295 gphoto2-port(2): Writing message (request=0x0 value=0x5 index=0x2800 si
ze=0=0x0)...
7.542379 gphoto2-port(3): No hexdump (NULL buffer)
7.547582 gphoto2-port(2): Reading message (request=0x0 value=0x0 index=0x2800 si
ze=1=0x1)...
7.549318 gphoto2-port(3): Hexdump of 1 = 0x1 bytes follows:
0000  05                     -
36.427062 gphoto2-port(2): Could only read 0 out of 1 byte(s)
36.427153 gphoto2-port(3): Empty hexdump of empty buffer
37.433981 gphoto2-port(2): Reading message (request=0xb value=0x0 index=0x4 size
=1=0x1)...
37.437761 gphoto2-port(2): Could only read 0 out of 1 byte(s)
37.437891 gphoto2-port(3): Empty hexdump of empty buffer
38.445527 gphoto2-port(2): Reading message (request=0xb value=0x0 index=0x4 size
=1=0x1)...
38.449335 gphoto2-port(2): Could only read 0 out of 1 byte(s)
38.449468 gphoto2-port(3): Empty hexdump of empty buffer
38.449546 gphoto2-camera(2): Operation failed!
*** Error (-1: 'Unspecified error') ***

38.450133 gp-camera(2): Freeing camera...
38.450231 gphoto2-camera(2): Exiting camera ('Aiptek Pencam')...
38.450330 gphoto2-port(2): Writing message (request=0x0 value=0x1 index=0x2306 s
ize=0=0x0)...
38.450413 gphoto2-port(3): No hexdump (NULL buffer)
38.451672 gphoto2-port(2): Writing message (request=0x0 value=0x0 index=0xd04 si
ze=0=0x0)...
38.451773 gphoto2-port(3): No hexdump (NULL buffer)
38.453687 gphoto2-port(2): Closing port...
38.454268 gphoto2-port(0): Could not release interface 1 (Invalid argument).
38.454481 libgphoto2/gphoto2-filesys.c(2): Clearing fscache LRU list...
38.454565 libgphoto2/gphoto2-filesys.c(2): fscache LRU list already empty
38.454651 gphoto2-filesystem(2): Internally deleting all folders from '/'...
38.454731 gphoto2-port(2): Freeing port...
38.454802 gphoto2-port(2): Closing port...
38.454982 gphoto2-port(0): Could not release interface 1 (Invalid argument).
38.455220 libgphoto2/gphoto2-filesys.c(2): Clearing fscache LRU list...
38.455303 libgphoto2/gphoto2-filesys.c(2): fscache LRU list already empty
38.455375 gphoto2-filesystem(2): Internally deleting all folders from '/'...
Abilities for camera             : Aiptek Pencam
Serial port support              : no
USB support                      : yes
Capture choices                  :
Configuration support            : no
Delete files on camera support   : no
File preview (thumbnail) support : yes
File upload support              : no
For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
developer mailing list <gphoto-devel@gphoto.org>, please run
gphoto2 as follows:

    env LANG=C gphoto2 --debug --debug -a -L

Please make sure there is sufficient quoting around the arguments.

 вот,типа того,...мать на интел 440 бх,гткам тож не работает,
сама камера под винь работает без нареканий,на этом же компе ,(( могет у кого какие идеи есть?