LINUX.ORG.RU
Форум — Linux-hardware  

И снова ATI


0

0

Стоит RH9 с ядром 2.4.23, скачал с сайта драйвера, установил - они стали, но openGL тормозит до беспредела (в Maya например работать невозможно) и при попытке сконфигурить на один "BigDesktop" (на две головы) иксы не грузятся, на одну голову или в Сlone режиме работает, но как уже писал OpenGL просто жуть как тормозит, если использовать драйвер radeon, то как-то все шустрее бегает Карточка, то собственно ATI Radeon 9700 Pro, подскажите кто знает как такое лечить или где про такое почитать можно, плз - новичок я в линуксе

anonymous
← Установка pctel-0.9.6.tar.gz
S.M.A.R.T →

Ответ на: комментарий от anonymous

Section "dri" Mode 0666 EndSection

Section "Module" Load "dbe" # Double buffer extension SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection Load "type1" Load "freetype" Load "glx" # libglx.a Load "dri" # libdri.a EndSection

Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection

anonymous
()
Ответ на: комментарий от anonymous 

Section "ServerFlags"
EndSection

Section "InputDevice"
    Identifier	"Keyboard1"
    Driver	"Keyboard"
    Option "AutoRepeat" "500 30"
    Option "XkbRules"	"xfree86"
    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"us,ru,ua"
EndSection

Section "InputDevice"
    Identifier	"Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/mouse"
EndSection

anonymous
()
Ответ на: комментарий от anonymous 

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   31.5 - 91.1
    VertRefresh 60 - 100
    Option "DPMS"
EndSection

Section "Monitor"
    Identifier  "Monitor1"
    HorizSync   31.5 - 91.1
    VertRefresh 60 - 100
    Option "DPMS"
EndSection

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver      "vga"
EndSection

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
    Option "DesktopSetup"               "0x00000100" 
    Option "MonitorLayout"              "CRT, CRT"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "31.5 - 91.1" 
    Option "VRefresh2"                  "60 - 100" 
    Option "ScreenOverlap"              "0" 
    Option "NoTV"                       "yes"     
    Option "TVStandard"                 "NTSC-M"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00008000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "on"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "2"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=4e45
    Screen 0
EndSection

Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    Subsection "Display"
        Depth       24
        Modes       "1600x1200" "1280x1024" "1024x768"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
    EndSubsection
EndSection

Section "ServerLayout"
    Screen "Screen0"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

anonymous
()
Ответ на: комментарий от anonymous 

Section "dri"
    Mode 0666
EndSection

Section "Module"
    Load        "dbe"  	# Double buffer extension
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load        "type1"
    Load        "freetype"
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

Section "Files"
    RgbPath	"/usr/X11R6/lib/X11/rgb"
    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

anonymous
()
Ответ на: комментарий от anonymous

Чтобы было на две головы в Section "ServerFlags" добавляем

Option "Xinerama" "true"

Добавляем еще одну секцию Device для второй головы и секцию Screen..

Что-то типа:

Section "Device" Identifier "Ati 9700 Primaty Head" Driver "fglrx"

....

BusID "PCI:1:0:0" # vendor=1002, device=4e45 Screen 0 EndSection

Section "Device" Identifier "Ati 9700 Secondary Head" Driver "fglrx"

....

BusID "PCI:1:0:0" # vendor=1002, device=4e45 Screen 1 EndSection

Section "Screen" Identifier "Screen0" Device "ATI 9700 Primaty Head" Monitor "Monitor0" DefaultDepth 24 Subsection "Display" Depth 24 Modes "1600x1200" "1280x1024" "1024x768" EndSubsection EndSection

Section "Screen" Identifier "Screen1" Device "ATI 9700 Secondary Head" Monitor "Monitor1" DefaultDepth 24 Subsection "Display" Depth 24 Modes "1600x1200" "1280x1024" "1024x768" EndSubsection EndSection

Далее меняем в секции ServerLayout

Section "ServerLayout" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSectionanonymous

anonymous
()
Ответ на: комментарий от anonymous 

Чтобы было на две головы в Section "ServerFlags" добавляем 

Option "Xinerama" "true" 

Добавляем еще одну секцию Device для второй головы и секцию Screen.. 

Что-то типа: 

Section "Device"
    Identifier "Ati 9700 Primaty Head"
    Driver "fglrx" 
    
    .... 
    
    BusID "PCI:1:0:0" # vendor=1002, device=4e45
    Screen 0
EndSection 

Section "Device"
    Identifier "Ati 9700 Secondary Head"
    Driver "fglrx" 
    
    .... 

    BusID "PCI:1:0:0" # vendor=1002, device=4e45
    Screen 1
EndSection 

Section "Screen"
    Identifier "Screen0"
    Device "ATI 9700 Primaty Head"
    Monitor "Monitor0"
    DefaultDepth 24
    Subsection "Display"
        Depth 24
        Modes "1600x1200" "1280x1024" "1024x768"
    EndSubsection
EndSection 

Section "Screen"
    Identifier "Screen1"
    Device "ATI 9700 Secondary Head"
    Monitor "Monitor1"
    DefaultDepth 24
    Subsection "Display"
        Depth 24
        Modes "1600x1200" "1280x1024" "1024x768"
    EndSubsection
EndSection 

Далее меняем в секции ServerLayout 

Section "ServerLayout"
   Screen 0 "Screen0" 0 0
   Screen 1 "Screen1" RightOf "Screen0"     
   InputDevice "Mouse1" "CorePointer" 
   InputDevice "Keyboard1" "CoreKeyboard"
EndSection

anonymous
()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.
← Установка pctel-0.9.6.tar.gz
Linux-hardware
S.M.A.R.T →