PCTV Pro

У меня проблема. Уже которую неделю пытаюсь заставить работать ТВтюнер Pinnacle PCTV Pro в ASPLinux 9.2. Вроде бы автодетектом определяется правильно, но когда запускаю Xawtv не может найти ни одного канала. Иногда показывает помехи в виде разноцветных линий, но не больше. Радио тоже не ловит. Может кто-то сталкивался уже с такой проблемой, посоветуйте пожалуйста что делать. В /var/log/messages пишется следующее: May 9 22:56:31 localhost kernel: Linux video capture interface: v1.00 May 9 22:56:31 localhost kernel: i2c-core.o: i2c core module May 9 22:56:31 localhost kernel: i2c-algo-bit.o: i2c bit algorithm module May 9 22:56:31 localhost kernel: bttv: driver version 0.7.107 loaded May 9 22:56:31 localhost kernel: bttv: using 4 buffers with 2080k (8320k total) for capture May 9 22:56:31 localhost kernel: bttv: Host bridge is PCI device 10de:01e0 (nVidia Corporation) May 9 22:56:31 localhost kernel: bttv: Bt8xx card found (0). May 9 22:56:31 localhost kernel: bttv0: Bt878 (rev 17) at 01:09.0, irq: 5, latency: 32, mmio: 0xe0000000 May 9 22:56:31 localhost kernel: bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 May 9 22:56:31 localhost kernel: bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected] May 9 22:56:31 localhost kernel: i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing... May 9 22:56:31 localhost kernel: i2c-algo-bit.o:1 scl: 1 sda: 0 May 9 22:56:31 localhost kernel: i2c-algo-bit.o:2 scl: 1 sda: 1 May 9 22:56:31 localhost kernel: i2c-algo-bit.o:3 scl: 0 sda: 1 May 9 22:56:31 localhost kernel: i2c-algo-bit.o:4 scl: 1 sda: 1 May 9 22:56:31 localhost kernel: i2c-algo-bit.o: bt848 #0 passed test. May 9 22:56:31 localhost kernel: i2c-core.o: adapter bt848 #0 registered as adapter 0. May 9 22:56:31 localhost kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found May 9 22:56:31 localhost kernel: bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes May 9 22:56:31 localhost kernel: bttv0: using tuner=33 May 9 22:56:31 localhost kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found May 9 22:56:31 localhost kernel: i2c-core.o: driver i2c msp3400 driver registered. May 9 22:56:31 localhost kernel: msp34xx: init: chip=MSP3410G-B11 +nicam +simple +radio May 9 22:56:31 localhost kernel: msp3410: daemon started May 9 22:56:31 localhost kernel: i2c-core.o: client [MSP3410G-B11] registered to adapter [bt848 #0](pos. 0). May 9 22:56:31 localhost kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found May 9 22:56:31 localhost kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found May 9 22:56:31 localhost kernel: tvaudio: TV audio decoder + audio/video mux driver May 9 22:56:31 localhost kernel: tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z May 9 22:56:31 localhost kernel: i2c-core.o: driver generic i2c audio driver registered. May 9 22:56:31 localhost kernel: tvaudio: found pic16c54 (PV951) @ 0x96 May 9 22:56:31 localhost kernel: i2c-core.o: client [pic16c54 (PV951)] registered to adapter [bt848 #0](pos. 1). May 9 22:56:31 localhost kernel: i2c-core.o: driver i2c tda9887 driver registered. May 9 22:56:31 localhost kernel: i2c-core.o: driver i2c TV tuner driver registered. May 9 22:56:31 localhost kernel: tuner: chip found @ 0xc0 May 9 22:56:31 localhost kernel: tuner: type set to 33 (MT2032 universal) May 9 22:56:31 localhost kernel: MT2032: Companycode=3cbf Part=42 Revision=97 May 9 22:56:31 localhost kernel: not a MT2032. May 9 22:56:31 localhost kernel: i2c-core.o: client [MT2032 universal] registered to adapter [bt848 #0](pos. 2). May 9 22:56:31 localhost kernel: MT2032: Companycode=3cbf Part=42 Revision=97 May 9 22:56:31 localhost kernel: not a MT2032. May 9 22:56:31 localhost kernel: bttv0: PLL: 28636363 => 35468950 .. ok May 9 22:56:31 localhost kernel: bttv0: registered device video0 May 9 22:56:31 localhost kernel: bttv0: registered device vbi0 May 9 22:56:31 localhost kernel: bttv0: registered device radio0