aser aspire + Debian

Оно там из коробки взлетает же. Это линукс, а не винда.

С дровами из коробки проблемы. Изображение медленно перерисовывается. На убунте это быстрее происходило.

Подключите squeeze-backports и обновите оттуда ядро и xserver-xorg-video-intel

ACER

«squeeze-backports» что это?

http://backports-master.debian.org/

репозиторий добавил, apt-get обновил. как обновить оттуда ядро и xserver-xorg-video-intel?

http://backports-master.debian.org/Instructions/

Install a package from backports
All backports are deactivated by default (i.e. the packages are pinned to 100 by using ButAutomaticUpgrades: yes in the Release files. If you want to install something from backports run:
apt-get -t squeeze-backports install «package»
of course you can use aptitude as well:
aptitude -t squeeze-backports install «package»

aptitude -t squeeze-backports upgrade '~i~n^linux-image' xserver-xorg-video-intel

обновил, перезагрузился. Не помогло.

Покажите /var/log/Xorg.0.log (возможно, я перепутал пакет с драйвером).

Какое используется DE? Используется ли композитный менеджер?

X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32-5-amd64 i686 Debian Current Operating System: Linux aswed-laptop 2.6.39-bpo.2-686-pae #1 SMP Thu Aug 4 11:02:22 UTC 2011 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-bpo.2-686-pae root=UUID=cd35bc95-4f6a-46a6-862a-517f5d514ba6 ro quiet Build Date: 30 October 2011 08:56:49PM xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: «/var/log/Xorg.0.log», Time: Sat Jan 28 23:30:42 2012 (==) Using system config directory «/usr/share/X11/xorg.conf.d» (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen «Default Screen Section» (0) (**) | |-->Monitor «<default monitor>» (==) No monitor specified for screen «Default Screen Section». Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory «/usr/share/fonts/X11/cyrillic» does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to «/usr/lib/xorg/modules» (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x81ecce0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:27ae:1025:022f Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0x58280000/524288, 0x40000000/268435456, 0x58300000/262144, I/O @ 0x000060f0/8 (--) PCI: (0:0:2:1) 8086:27a6:1025:022f Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x58200000/524288 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: «extmod»

(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor=«X.Org Foundation» compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: «dbe» (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor=«X.Org Foundation» compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: «glx» (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor=«X.Org Foundation» compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: «record» (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor=«X.Org Foundation» compiled for 1.7.7, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: «dri» (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor=«X.Org Foundation» compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: «dri2» (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor=«X.Org Foundation» compiled for 1.7.7, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (==) Matched intel as autoconfigured driver 0 (==) Matched vesa as autoconfigured driver 1 (==) Matched fbdev as autoconfigured driver 2

(==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: «intel» (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor=«X.Org Foundation» compiled for 1.7.7, module version = 2.13.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: «vesa» (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor=«X.Org Foundation» compiled for 1.7.7, module version = 2.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: «fbdev» (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor=«X.Org Foundation» compiled for 1.7.6.901, module version = 0.4.2 ABI class: X.Org Video Driver, version 6.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (II) Primary Device is: PCI 00@00:02:0 (WW) Falling back to old probe method for vesa (WW) Falling back to old probe method for fbdev (II) Loading sub module «fbdevhw» (II) LoadModule: «fbdevhw» (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so (II) Module fbdevhw: vendor=«X.Org Foundation» compiled for 1.7.7, module version = 0.0.2 ABI class: X.Org Video Driver, version 6.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): Creating default Display subsection in Screen section «Default Screen Section» for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME (--) intel(0): Chipset: «945GME» (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): video overlay key set to 0x101fe (II) intel(0): Output LVDS1 has no monitor section (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 (II) intel(0): Output VGA1 has no monitor section (II) intel(0): EDID for output LVDS1 (II) intel(0): Manufacturer: LGD Model: 1b9 Serial#: 0 (II) intel(0): Year: 2008 Week: 0 (II) intel(0): EDID Version: 1.3 (II) intel(0): Digital Display Input (II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 13 (II) intel(0): Gamma: 2.20 (II) intel(0): No DPMS capabilities specified (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.588 redY: 0.347 greenX: 0.331 greenY: 0.546 (II) intel(0): blueX: 0.154 blueY: 0.128 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 62.6 MHz Image Size: 224 x 126 mm (II) intel(0): h_active: 1024 h_sync: 1072 h_sync_end 1104 h_blank_end 1490 h_border: 0 (II) intel(0): v_active: 600 v_sync: 603 v_sync_end 609 v_blanking: 700 v_border: 0 (II) intel(0): LG Display (II) intel(0): Monitor name: LP101WSA-TLA1 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff0030e4b90100000000 (II) intel(0): 0012010380160d780abfb59658548b27 (II) intel(0): 20505400000001010101010101010101 (II) intel(0): 010101010101741800d2415864203020 (II) intel(0): 3600e07e000000190000000000000000 (II) intel(0): 00000000000000000000000000fe004c (II) intel(0): 4720446973706c61790a2020000000fc (II) intel(0): 004c503130315753412d544c41310024 (II) intel(0): EDID vendor «LGD», prod id 441 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline «1024x600"x0.0 62.60 1024 1072 1104 1490 600 603 609 700 -hsync -vsync (42.0 kHz) (II) intel(0): Not using default mode „320x240“ (doublescan mode not supported) (II) intel(0): Not using default mode „400x300“ (doublescan mode not supported) (II) intel(0): Not using default mode „400x300“ (doublescan mode not supported) (II) intel(0): Not using default mode „512x384“ (doublescan mode not supported) (II) intel(0): Not using default mode „640x480“ (doublescan mode not supported) (II) intel(0): Not using default mode „640x512“ (doublescan mode not supported) (II) intel(0): Not using default mode „800x600“ (doublescan mode not supported) (II) intel(0): Not using default mode „576x432“ (doublescan mode not supported) (II) intel(0): Not using default mode „680x384“ (doublescan mode not supported) (II) intel(0): Not using default mode „680x384“ (doublescan mode not supported) (II) intel(0): Not using default mode „700x525“ (doublescan mode not supported) (II) intel(0): Not using default mode „720x450“ (doublescan mode not supported) (II) intel(0): Not using default mode „800x512“ (doublescan mode not supported)

(II) intel(0): Not using default mode «840x525» (doublescan mode not supported) (II) intel(0): Not using default mode «840x525» (doublescan mode not supported) (II) intel(0): Not using default mode «960x540» (doublescan mode not supported) (II) intel(0): Not using default mode «960x600» (doublescan mode not supported) (II) intel(0): Printing probed modes for output LVDS1 (II) intel(0): Modeline «1024x600"x60.0 62.60 1024 1072 1104 1490 600 603 609 700 -hsync -vsync (42.0 kHz) (II) intel(0): Modeline „800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline „800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline „640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID for output VGA1 (II) intel(0): Output LVDS1 connected (II) intel(0): Output VGA1 disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS1 using initial mode 1024x600 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (II) intel(0): Kernel page flipping support detected, enabling (**) intel(0): Display dimensions: (220, 130) mm (**) intel(0): DPI set to (118, 117) (II) Loading sub module „fb“ (II) LoadModule: „fb“ (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor=„X.Org Foundation“ compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) UnloadModule: „vesa“ (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) UnloadModule: „fbdev“ (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) UnloadModule: „fbdevhw“ (II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so (==) Depth 24 pixmap format is 32 bpp (==) intel(0): VideoRam: 262144 KB (II) intel(0): [DRI2] Setup complete (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (II) put_image (II) get_image (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (==) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: DRI2 Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 270 x 158 (II) config/udev: Adding input device Power Button (/dev/input/event4) (**) Power Button: Applying InputClass „evdev keyboard catchall“ (II) LoadModule: „evdev“ (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor=„X.Org Foundation“ compiled for 1.7.6.901, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: “/dev/input/event4“ (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device „Power Button“ (type: KEYBOARD) (**) Option „xkb_rules“ „evdev“ (**) Option „xkb_model“ „pc105“ (**) Option „xkb_layout“ „us,ru“ (**) Option „xkb_variant“ “,» (**) Option «xkb_options» «grp:ctrl_shift_toggle,grp_led:scroll» (II) config/udev: Adding input device Video Bus (/dev/input/event5) (**) Video Bus: Applying InputClass «evdev keyboard catchall» (**) Video Bus: always reports core events (**) Video Bus: Device: «/dev/input/event5» (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device «Video Bus» (type: KEYBOARD) (**) Option «xkb_rules» «evdev»

Не позорьтесь, удалите эту портянку и воспользуйтесь http://paste.org.ru/

(**) Option «xkb_model» «pc105» (**) Option «xkb_layout» «us,ru» (**) Option «xkb_variant» "," (**) Option «xkb_options» «grp:ctrl_shift_toggle,grp_led:scroll» (II) config/udev: Adding input device Power Button (/dev/input/event1) (**) Power Button: Applying InputClass «evdev keyboard catchall» (**) Power Button: always reports core events (**) Power Button: Device: «/dev/input/event1» (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device «Power Button» (type: KEYBOARD) (**) Option «xkb_rules» «evdev» (**) Option «xkb_model» «pc105» (**) Option «xkb_layout» «us,ru» (**) Option «xkb_variant» "," (**) Option «xkb_options» «grp:ctrl_shift_toggle,grp_led:scroll» (II) config/udev: Adding input device Lid Switch (/dev/input/event2) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Sleep Button (/dev/input/event3) (**) Sleep Button: Applying InputClass «evdev keyboard catchall» (**) Sleep Button: always reports core events (**) Sleep Button: Device: «/dev/input/event3» (II) Sleep Button: Found keys (II) Sleep Button: Configuring as keyboard (II) XINPUT: Adding extended input device «Sleep Button» (type: KEYBOARD) (**) Option «xkb_rules» «evdev» (**) Option «xkb_model» «pc105» (**) Option «xkb_layout» «us,ru» (**) Option «xkb_variant» "," (**) Option «xkb_options» «grp:ctrl_shift_toggle,grp_led:scroll» (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Webcam (/dev/input/event7) (**) Webcam: Applying InputClass «evdev keyboard catchall» (**) Webcam: always reports core events (**) Webcam: Device: «/dev/input/event7» (II) Webcam: Found keys (II) Webcam: Configuring as keyboard (II) XINPUT: Adding extended input device «Webcam» (type: KEYBOARD) (**) Option «xkb_rules» «evdev» (**) Option «xkb_model» «pc105» (**) Option «xkb_layout» «us,ru» (**) Option «xkb_variant» "," (**) Option «xkb_options» «grp:ctrl_shift_toggle,grp_led:scroll» (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) (**) AT Translated Set 2 keyboard: Applying InputClass «evdev keyboard catchall» (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: «/dev/input/event0» (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device «AT Translated Set 2 keyboard» (type: KEYBOARD) (**) Option «xkb_rules» «evdev» (**) Option «xkb_model» «pc105» (**) Option «xkb_layout» «us,ru» (**) Option «xkb_variant» "," (**) Option «xkb_options» «grp:ctrl_shift_toggle,grp_led:scroll» (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8) (**) SynPS/2 Synaptics TouchPad: Applying InputClass «evdev touchpad catchall» (**) SynPS/2 Synaptics TouchPad: Applying InputClass «touchpad catchall» (II) LoadModule: «synaptics» (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so (II) Module synaptics: vendor=«X.Org Foundation» compiled for 1.7.6.901, module version = 1.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (II) Synaptics touchpad driver version 1.2.2 (**) Option «Device» «/dev/input/event8» (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5218 (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 15 (II) SynPS/2 Synaptics TouchPad: buttons: left right double triple (--) SynPS/2 Synaptics TouchPad: touchpad found (**) SynPS/2 Synaptics TouchPad: always reports core events (II) XINPUT: Adding extended input device «SynPS/2 Synaptics TouchPad» (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 (--) SynPS/2 Synaptics TouchPad: touchpad found (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) (**) SynPS/2 Synaptics TouchPad: Applying InputClass «touchpad catchall» (II) Synaptics touchpad driver version 1.2.2 SynPS/2 Synaptics TouchPad no synaptics event device found (**) Option «Device» «/dev/input/mouse0» Query no Synaptics: 6003C8 (--) SynPS/2 Synaptics TouchPad: no supported touchpad found (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware. (EE) PreInit failed for input device «SynPS/2 Synaptics TouchPad» (II) UnloadModule: «synaptics» (II) config/udev: Adding input device PC Speaker (/dev/input/event6) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event12) (**) ACPI Virtual Keyboard Device: Applying InputClass «evdev keyboard catchall» (**) ACPI Virtual Keyboard Device: always reports core events (**) ACPI Virtual Keyboard Device: Device: «/dev/input/event12» (II) ACPI Virtual Keyboard Device: Found keys (II) ACPI Virtual Keyboard Device: Configuring as keyboard (II) XINPUT: Adding extended input device «ACPI Virtual Keyboard Device» (type: KEYBOARD) (**) Option «xkb_rules» «evdev» (**) Option «xkb_model» «pc105» (**) Option «xkb_layout» «us,ru» (**) Option «xkb_variant» "," (**) Option «xkb_options» «grp:ctrl_shift_toggle,grp_led:scroll» (II) intel(0): EDID vendor «LGD», prod id 441 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline «1024x600"x0.0 62.60 1024 1072 1104 1490 600 603 609 700 -hsync -vsync (42.0 kHz) (II) intel(0): EDID vendor „LGD“, prod id 441 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline „1024x600"x0.0 62.60 1024 1072 1104 1490 600 603 609 700 -hsync -vsync (42.0 kHz) (II) intel(0): EDID vendor „LGD“, prod id 441 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline „1024x600"x0.0 62.60 1024 1072 1104 1490 600 603 609 700 -hsync -vsync (42.0 kHz) (II) intel(0): EDID vendor „LGD“, prod id 441 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline „1024x600"x0.0 62.60 1024 1072 1104 1490 600 603 609 700 -hsync -vsync (42.0 kHz) (II) intel(0): EDID vendor „LGD“, prod id 441 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline „1024x600"x0.0 62.60 1024 1072 1104 1490 600 603 609 700 -hsync -vsync (42.0 kHz) (II) intel(0): EDID vendor „LGD“, prod id 441 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline „1024x600"x0.0 62.60 1024 1072 1104 1490 600 603 609 700 -hsync -vsync (42.0 kHz) (II) intel(0): EDID vendor „LGD“, prod id 441 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline „1024x600"x0.0 62.60 1024 1072 1104 1490 600 603 609 700 -hsync -vsync (42.0 kHz)

Вобщем, видеодрайвер используется intel, и если Вы его обновили, больше от тормозов избавиться уже не удастся.

Возможно, поможет включение или отключение композитного менеджера.

Спасибо и на том

На Ubuntu драйвер банально новее и потому шустрее.

На самом деле Дебианопроблемы.

Да я не о проблемах. Я имел в виду, что ТС не правильно написал название девайса.

Понятно, я уж подумал как обычно на Acer напраслину наводят за их прегрешения многолетней давности.