проблема: SoC не видит флешку (вплоть до dmesg и lsusb), но видит usb-винт:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN
[root@fedora-arm modules]# zgrep -E 'CONFIG_HOTPLUG|CONFIG_SCSI|CONFIG_BLK_DEV_SD' /proc/config.gz
CONFIG_HOTPLUG=y
CONFIG_SCSI_MOD=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
может ему модуль какой-то надо (да вот какой)?, а то у меня их совсем чуть-чуть вроде бы как usb-storage, но как тогда usb-винтом видится?
# lsmod
Module Size Used by
8192cu 593325 0
lockd 57363 0
sunrpc 214125 1 lockd
autofs4 23812 2
SoC = https://www.miniand.com/wiki/Hackberry A10
дистрибутив = fedora 17,
uname -a = Linux fedora-arm 3.0.42+ #8 PREEMPT Sat Nov 3 17:29:49 EDT 2012 armv7l armv7l armv7l GNU/Linux
