здравствуйте устанавливаю Линукс на allwinner a13 и столкнулся с проблемами с тачем... скачал ядро 3.4 ,скачал gslx680 драйвер отсюда >>https://gitorious.org/gslx680-for-sunxi ....собрал..... insmod gslx680_ts.ko >>>снизу выхлоп,,,кто нибуть помогите разобратся
===========================gslx680_ts_init=====================
Jan 2 15:24:40 sun4i-device kernel: [ 116.299098] _fetch_sysconfig_para.
Jan 2 15:24:40 sun4i-device kernel: [ 116.302083] gslx680 firmware gslx680.fw.
Jan 2 15:24:40 sun4i-device kernel: [ 116.311541] _fetch_sysconfig_para: after: ctp_twi_addr is 0x40, dirty_addr_buf: 0x40. dirty_addr_buf[1]: 0xfffe
Jan 2 15:24:40 sun4i-device kernel: [ 116.315739] _fetch_sysconfig_para: ctp_twi_id is 1.
Jan 2 15:24:40 sun4i-device kernel: [ 116.319918] _fetch_sysconfig_para: screen_max_x = 800.
Jan 2 15:24:40 sun4i-device kernel: [ 116.324096] _fetch_sysconfig_para: screen_max_y = 480.
Jan 2 15:24:40 sun4i-device kernel: [ 116.328485] _fetch_sysconfig_para: revert_x_flag = 0.
Jan 2 15:24:40 sun4i-device kernel: [ 116.332578] _fetch_sysconfig_para: revert_y_flag = 0.
Jan 2 15:24:40 sun4i-device kernel: [ 116.337269] _fetch_sysconfig_para: exchange_x_y_flag = 0.
Jan 2 15:24:40 sun4i-device kernel: [ 116.343783] i2c-core: driver [gslx680] using legacy suspend method
Jan 2 15:24:40 sun4i-device kernel: [ 116.349341] i2c-core: driver [gslx680] using legacy resume method
Jan 2 15:24:40 sun4i-device kernel: [ 116.355021] ctp_detect: Detected chip gslx680 at adapter 1, address 0x40
Jan 2 15:24:40 sun4i-device kernel: [ 116.360590] ====gslx680_ts_probe begin=====.
Jan 2 15:24:40 sun4i-device kernel: [ 116.362612] ==kzalloc success=
Jan 2 15:24:40 sun4i-device kernel: [ 116.372832] [GSLX680] Enter gsl_ts_init_ts
Jan 2 15:24:40 sun4i-device kernel: [ 116.377664] ctp_set_irq_mode: config gpio to int mode.
Jan 2 15:24:40 sun4i-device kernel: [ 116.383603] ctp_set_irq_mode, 854: gpio_int_info, port = 7, port_num = 11.
Jan 2 15:24:40 sun4i-device kernel: [ 116.385924] INTERRUPT CONFIG
Jan 2 15:24:40 sun4i-device kernel: [ 116.396227] input: gslx680 as /devices/platform/sunxi-i2c.1/i2c-1/1-0040/input/input3
Jan 2 15:24:40 sun4i-device kernel: [ 116.434343] i2c state isn't idle(0xf8)
Jan 2 15:24:40 sun4i-device kernel: [ 116.435584] STOP failed!
Jan 2 15:24:40 sun4i-device kernel: [ 116.437692] incomplete xfer (0xff)
Jan 2 15:24:40 sun4i-device kernel: [ 116.440664] reset_chip: gsl_ts_write 1 fail!
Jan 2 15:24:40 sun4i-device kernel: [ 116.443801] init_chip: reset_chip fail: -70
Jan 2 15:24:40 sun4i-device kernel: [ 116.447655] gslx680 1-0040: init_chip failed
Jan 2 15:24:40 sun4i-device kernel: [ 116.452123] gslx680: probe of 1-0040 failed with error -70
в script.bin добавил это>>
[ctp_para]
ctp_used = 1
ctp_name = "gslx680"
ctp_twi_id = 1
ctp_twi_addr = 0x40
ctp_firmware = "gslx680.fw"
ctp_screen_max_x = 800
ctp_screen_max_y = 480
ctp_revert_x_flag = 0
ctp_revert_y_flag = 0
ctp_exchange_x_y_flag = 0
ctp_int_port = port:PG11<6><default><default><default>
ctp_wakeup = port:PB03<1><default><default><1>
ctp_reset = port:PB03<1><default><default><1>
ctp_io_port = port:PG11<6><default><default><default>
