plibsys — кросс-платформенная системная библиотека на C

warning: ‘readdir_r’ is deprecated [-Wdeprecated-declarations]
  if (P_UNLIKELY (readdir_r (dir->dir, &dirent_st, &dir->dir_result) != 0)) {

./puthread_test
Running 5 test cases...
** Error: PUThread::p_uthread_create_internal: failed to allocate memory **
** Error: PUThread::p_uthread_create_internal: failed to allocate memory **
** Error: PUThread::pp_uthread_get_tls_key: failed to allocate memory **
** Error: PUThread::p_uthread_current: failed to allocate memory **
** Error: PUThread::p_uthread_local_new: failed to allocate memory **
** Error: PUThread::pp_uthread_get_tls_key: failed to allocate memory **
** Error: PUThread::p_uthread_current: failed to allocate memory **
** Error: PUThread::pp_uthread_get_tls_key: failed to allocate memory **
** Error: PUThread::pp_uthread_get_tls_key: failed to allocate memory **
** Error: PUThread::pp_uthread_get_tls_key: failed to allocate memory **
** Error: PUThread::pp_uthread_get_tls_key: failed to allocate memory **
** Warning: PUThread::p_uthread_exit: p_uthread_exit() cannot be called from an unknown thread **

** Error: PRWLock::p_rwlock_new: failed to allocate memory **

./psocket_test
Running 7 test cases...
** Warning: PSocket::p_socket_set_keepalive: setsockopt() with SO_KEEPALIVE failed **
** Warning: PSocket::p_socket_set_keepalive: setsockopt() with SO_KEEPALIVE failed **

-- The C compiler identification is GNU 4.8.0
-- The CXX compiler identification is GNU 4.8.0
-- Check for working C compiler: /usr/bin/gcc
-- Check for working C compiler: /usr/bin/gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/g++
-- Check for working CXX compiler: /usr/bin/g++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
CMake Error at CMakeLists.txt:5 (include):
  include could not find load file:

    /root/plibsys-master/src/cmake/PlatformDetect.cmake


CMake Error at CMakeLists.txt:6 (include):
  include could not find load file:

    /root/plibsys-master/src/cmake/VisibilityDetect.cmake


CMake Error at CMakeLists.txt:10 (plibsys_detect_target_platform):
  Unknown CMake command "plibsys_detect_target_platform".


CMake Warning (dev) in CMakeLists.txt:
  No cmake_minimum_required command is present.  A line of code such as

    cmake_minimum_required(VERSION 2.8)

  should be added at the top of the file.  The version specified may be lower
  if you wish to support older CMake versions for this project.  For more
  information run "cmake --help-policy CMP0000".
This warning is for project developers.  Use -Wno-dev to suppress it.

-- Configuring incomplete, errors occurred!

CMake Error at CMakeLists.txt:50 (message):
  plibsys doesn't support unknown platform linux-gcc


CMake Warning (dev) in CMakeLists.txt:
  No cmake_minimum_required command is present.  A line of code such as

    cmake_minimum_required(VERSION 2.8)

  should be added at the top of the file.  The version specified may be lower
  if you wish to support older CMake versions for this project.  For more
  information run "cmake --help-policy CMP0000".
This warning is for project developers.  Use -Wno-dev to suppress it.

-- Configuring incomplete, errors occurred!

-- Checking for lock-free atomic intrinsics
-- Performing Test PLIBSYS_ATOMIC_IMPL_GCCATOMIC
-- Performing Test PLIBSYS_ATOMIC_IMPL_GCCATOMIC - Success
-- Checking for lock-free atomic intrinsics - works
-- Check if the system is big endian
-- Searching 16 bit integer
-- Looking for sys/types.h
-- Looking for sys/types.h - found
-- Looking for stdint.h
-- Looking for stdint.h - found
-- Looking for stddef.h
-- Looking for stddef.h - found
-- Check size of unsigned short
-- Check size of unsigned short - done
-- Using unsigned short
-- Check if the system is big endian - little endian
-- Looking for float.h
-- Looking for float.h - found
-- Looking for values.h
-- Looking for values.h - found
-- Looking for limits.h
-- Looking for limits.h - found
-- Check size of size_t
-- Check size of size_t - done
-- Check size of long
-- Check size of long - done
-- Checking whether mmap has anonymous mapping
-- Performing Test PLIBSYS_MMAP_HAS_MAP_ANON
-- Performing Test PLIBSYS_MMAP_HAS_MAP_ANON - Success
-- Performing Test PLIBSYS_MMAP_HAS_MAP_ANONYMOUS
-- Performing Test PLIBSYS_MMAP_HAS_MAP_ANONYMOUS - Success
-- Checking whether mmap has anonymous mapping - yes
-- Checking whether clock_nanosleep() presents
-- Performing Test PLIBSYS_HAS_CLOCKNANOSLEEP
-- Performing Test PLIBSYS_HAS_CLOCKNANOSLEEP - Success
-- Checking whether clock_nanosleep() presents - yes
-- Checking whether nanosleep() presents
-- Performing Test PLIBSYS_HAS_NANOSLEEP
-- Performing Test PLIBSYS_HAS_NANOSLEEP - Success
-- Checking whether nanosleep() presents - yes
-- Checking whether getaddrinfo() presents
-- Performing Test PLIBSYS_HAS_GETADDRINFO
-- Performing Test PLIBSYS_HAS_GETADDRINFO - Success
-- Checking whether getaddrinfo() presents - yes
-- Checking whether POSIX thread scheduling presents
-- Performing Test PLIBSYS_HAS_POSIX_SCHEDULING
-- Performing Test PLIBSYS_HAS_POSIX_SCHEDULING - Success
-- Checking whether POSIX thread scheduling presents - yes
-- Checking whether POSIX thread stack size is supported
-- Performing Test PLIBSYS_HAS_POSIX_STACKSIZE
-- Performing Test PLIBSYS_HAS_POSIX_STACKSIZE - Success
-- Checking whether POSIX thread stack size is supported - yes
-- Checking whether POSIX read-write locks are supported
-- Performing Test PLIBSYS_HAS_POSIX_RWLOCK
-- Performing Test PLIBSYS_HAS_POSIX_RWLOCK - Success
-- Checking whether POSIX read-write locks are supported - yes
-- Checking whether socklen_t is defined
-- Performing Test PLIBSYS_HAS_SOCKLEN_T
-- Performing Test PLIBSYS_HAS_SOCKLEN_T - Success
-- Checking whether socklen_t is defined - yes
-- Checking whether struct sockaddr_storage is defined
-- Performing Test PLIBSYS_HAS_SOCKADDR_STORAGE
-- Performing Test PLIBSYS_HAS_SOCKADDR_STORAGE - Success
-- Checking whether struct sockaddr_storage is defined - yes
-- Checking whether struct sockaddr has sa_len
-- Performing Test PLIBSYS_SOCKADDR_HAS_SA_LEN
-- Performing Test PLIBSYS_SOCKADDR_HAS_SA_LEN - Failed
-- Checking whether struct sockaddr has sa_len - no
-- Checking whether struct sockaddr_in6 has sin6_scope_id
-- Performing Test PLIBSYS_SOCKADDR_IN6_HAS_SCOPEID
-- Performing Test PLIBSYS_SOCKADDR_IN6_HAS_SCOPEID - Success
-- Checking whether struct sockaddr_in6 has sin6_scope_id - yes
-- Checking whether struct sockaddr_in6 has sin6_flowinfo
-- Performing Test PLIBSYS_SOCKADDR_IN6_HAS_FLOWINFO
-- Performing Test PLIBSYS_SOCKADDR_IN6_HAS_FLOWINFO - Success
-- Checking whether struct sockaddr_in6 has sin6_flowinfo - yes
-- Check size of ((struct sockaddr *) 0)->sa_family
-- Check size of ((struct sockaddr *) 0)->sa_family - done
-- Checking whether lldiv() presents
-- Performing Test PLIBSYS_HAS_LLDIV
-- Performing Test PLIBSYS_HAS_LLDIV - Success
-- Checking whether lldiv() presents - yes
CMake Error at CMakeLists.txt:761 (set_target_properties):
  set_target_properties called with incorrect number of arguments.



        == Build configuration ==

        Platfrom:               linux
        Compiler:               gcc
        Address model:          64 bit

        Thread model:           posix
        RW lock model:          posix
        IPC model:              posix
        DIR model:              posix
        Library loader model:   posix
        Time profiler model:    posix
        Atomic model:           c11

        Platform defines:       -D_REENTRANT
        Platform CFLAGS:
        Platform LDFLAGS:
        Platform libraries:     -pthread;rt;dl

        Build static library:
        Coverage support:
        Visibility:


CMake Warning (dev) in CMakeLists.txt:
  No cmake_minimum_required command is present.  A line of code such as

    cmake_minimum_required(VERSION 2.8)

  should be added at the top of the file.  The version specified may be lower
  if you wish to support older CMake versions for this project.  For more
  information run "cmake --help-policy CMP0000".
This warning is for project developers.  Use -Wno-dev to suppress it.

-- Configuring incomplete, errors occurred!

-- Checking for lock-free atomic intrinsics
-- Checking for lock-free atomic intrinsics - works
-- Checking whether mmap has anonymous mapping
-- Checking whether mmap has anonymous mapping - yes
-- Checking whether clock_nanosleep() presents
-- Checking whether clock_nanosleep() presents - yes
-- Checking whether nanosleep() presents
-- Checking whether nanosleep() presents - yes
-- Checking whether getaddrinfo() presents
-- Checking whether getaddrinfo() presents - yes
-- Checking whether POSIX thread scheduling presents
-- Checking whether POSIX thread scheduling presents - yes
-- Checking whether POSIX thread stack size is supported
-- Checking whether POSIX thread stack size is supported - yes
-- Checking whether POSIX read-write locks are supported
-- Checking whether POSIX read-write locks are supported - yes
-- Checking whether socklen_t is defined
-- Checking whether socklen_t is defined - yes
-- Checking whether struct sockaddr_storage is defined
-- Checking whether struct sockaddr_storage is defined - yes
-- Checking whether struct sockaddr has sa_len
-- Checking whether struct sockaddr has sa_len - no
-- Checking whether struct sockaddr_in6 has sin6_scope_id
-- Checking whether struct sockaddr_in6 has sin6_scope_id - yes
-- Checking whether struct sockaddr_in6 has sin6_flowinfo
-- Checking whether struct sockaddr_in6 has sin6_flowinfo - yes
-- Checking whether lldiv() presents
-- Checking whether lldiv() presents - yes

        == Build configuration ==

        Platfrom:               linux
        Compiler:               gcc
        Address model:          64 bit

        Thread model:           posix
        RW lock model:          posix
        IPC model:              posix
        DIR model:              posix
        Library loader model:   posix
        Time profiler model:    posix
        Atomic model:           c11

        Platform defines:       -D_REENTRANT
        Platform CFLAGS:
        Platform LDFLAGS:
        Platform libraries:     -pthread;rt;dl

        Build static library:
        Coverage support:
        Visibility:


CMake Warning (dev) in CMakeLists.txt:
  No cmake_minimum_required command is present.  A line of code such as

    cmake_minimum_required(VERSION 2.8)

  should be added at the top of the file.  The version specified may be lower
  if you wish to support older CMake versions for this project.  For more
  information run "cmake --help-policy CMP0000".
This warning is for project developers.  Use -Wno-dev to suppress it.

-- Configuring done
-- Generating done
-- Build files have been written to: /root/plibsys-master

lcc: "/root/plibsys-master/src/pmem.h", строка 66: фатальная ошибка: не могу
          открыть исходник файл "ptypes.h"
  #include <ptypes.h>
                     ^

1 катастрофическая ошибка обнаружено при компиляции "/root/plibsys-master/src/pcryptohash.c".
Compilation terminated.
make[2]: *** [CMakeFiles/plibsys.dir/pcryptohash.o] Ошибка 1
make[1]: *** [CMakeFiles/plibsys.dir/all] Ошибка 2
make: *** [all] Ошибка 2

-- The C compiler identification is GNU 4.8.0
-- The CXX compiler identification is GNU 4.8.0
-- Check for working C compiler: /usr/bin/gcc
-- Check for working C compiler: /usr/bin/gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/g++
-- Check for working CXX compiler: /usr/bin/g++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Checking for lock-free atomic intrinsics
-- Performing Test PLIBSYS_ATOMIC_IMPL_GCCATOMIC
-- Performing Test PLIBSYS_ATOMIC_IMPL_GCCATOMIC - Success
-- Checking for lock-free atomic intrinsics - works
-- Check if the system is big endian
-- Searching 16 bit integer
-- Looking for sys/types.h
-- Looking for sys/types.h - found
-- Looking for stdint.h
-- Looking for stdint.h - found
-- Looking for stddef.h
-- Looking for stddef.h - found
-- Check size of unsigned short
-- Check size of unsigned short - done
-- Using unsigned short
-- Check if the system is big endian - little endian
-- Looking for float.h
-- Looking for float.h - found
-- Looking for values.h
-- Looking for values.h - found
-- Looking for limits.h
-- Looking for limits.h - found
-- Check size of size_t
-- Check size of size_t - done
-- Check size of long
-- Check size of long - done
-- Checking whether mmap has anonymous mapping
-- Performing Test PLIBSYS_MMAP_HAS_MAP_ANON
-- Performing Test PLIBSYS_MMAP_HAS_MAP_ANON - Success
-- Performing Test PLIBSYS_MMAP_HAS_MAP_ANONYMOUS
-- Performing Test PLIBSYS_MMAP_HAS_MAP_ANONYMOUS - Success
-- Checking whether mmap has anonymous mapping - yes
-- Checking whether clock_nanosleep() presents
-- Performing Test PLIBSYS_HAS_CLOCKNANOSLEEP
-- Performing Test PLIBSYS_HAS_CLOCKNANOSLEEP - Success
-- Checking whether clock_nanosleep() presents - yes
-- Checking whether nanosleep() presents
-- Performing Test PLIBSYS_HAS_NANOSLEEP
-- Performing Test PLIBSYS_HAS_NANOSLEEP - Success
-- Checking whether nanosleep() presents - yes
-- Checking whether getaddrinfo() presents
-- Performing Test PLIBSYS_HAS_GETADDRINFO
-- Performing Test PLIBSYS_HAS_GETADDRINFO - Success
-- Checking whether getaddrinfo() presents - yes
-- Checking whether POSIX thread scheduling presents
-- Performing Test PLIBSYS_HAS_POSIX_SCHEDULING
-- Performing Test PLIBSYS_HAS_POSIX_SCHEDULING - Success
-- Checking whether POSIX thread scheduling presents - yes
-- Checking whether POSIX thread stack size is supported
-- Performing Test PLIBSYS_HAS_POSIX_STACKSIZE
-- Performing Test PLIBSYS_HAS_POSIX_STACKSIZE - Success
-- Checking whether POSIX thread stack size is supported - yes
-- Checking whether POSIX read-write locks are supported
-- Performing Test PLIBSYS_HAS_POSIX_RWLOCK
-- Performing Test PLIBSYS_HAS_POSIX_RWLOCK - Success
-- Checking whether POSIX read-write locks are supported - yes
-- Checking whether socklen_t is defined
-- Performing Test PLIBSYS_HAS_SOCKLEN_T
-- Performing Test PLIBSYS_HAS_SOCKLEN_T - Success
-- Checking whether socklen_t is defined - yes
-- Checking whether struct sockaddr_storage is defined
-- Performing Test PLIBSYS_HAS_SOCKADDR_STORAGE
-- Performing Test PLIBSYS_HAS_SOCKADDR_STORAGE - Success
-- Checking whether struct sockaddr_storage is defined - yes
-- Checking whether struct sockaddr has sa_len
-- Performing Test PLIBSYS_SOCKADDR_HAS_SA_LEN
-- Performing Test PLIBSYS_SOCKADDR_HAS_SA_LEN - Failed
-- Checking whether struct sockaddr has sa_len - no
-- Checking whether struct sockaddr_in6 has sin6_scope_id
-- Performing Test PLIBSYS_SOCKADDR_IN6_HAS_SCOPEID
-- Performing Test PLIBSYS_SOCKADDR_IN6_HAS_SCOPEID - Success
-- Checking whether struct sockaddr_in6 has sin6_scope_id - yes
-- Checking whether struct sockaddr_in6 has sin6_flowinfo
-- Performing Test PLIBSYS_SOCKADDR_IN6_HAS_FLOWINFO
-- Performing Test PLIBSYS_SOCKADDR_IN6_HAS_FLOWINFO - Success
-- Checking whether struct sockaddr_in6 has sin6_flowinfo - yes
-- Check size of ((struct sockaddr *) 0)->sa_family
-- Check size of ((struct sockaddr *) 0)->sa_family - done
-- Checking whether lldiv() presents
-- Performing Test PLIBSYS_HAS_LLDIV
-- Performing Test PLIBSYS_HAS_LLDIV - Success
-- Checking whether lldiv() presents - yes

        == Build configuration ==

        Platfrom:               linux
        Compiler:               gcc
        Address model:          64 bit

        Thread model:           posix
        RW lock model:          posix
        IPC model:              posix
        DIR model:              posix
        Library loader model:   posix
        Time profiler model:    posix
        Atomic model:           c11

        Platform defines:       -D_REENTRANT
        Platform CFLAGS:
        Platform LDFLAGS:
        Platform libraries:     -pthread;rt;dl

        Build static library:
        Coverage support:
        Visibility:


CMake Warning (dev) in CMakeLists.txt:
  No cmake_minimum_required command is present.  A line of code such as

    cmake_minimum_required(VERSION 2.8)

  should be added at the top of the file.  The version specified may be lower
  if you wish to support older CMake versions for this project.  For more
  information run "cmake --help-policy CMP0000".
This warning is for project developers.  Use -Wno-dev to suppress it.

-- Configuring done
-- Generating done
-- Build files have been written to: /root/plibsys-master/src
Scanning dependencies of target plibsys
[  2%] Building C object CMakeFiles/plibsys.dir/pcryptohash.o
[  5%] Building C object CMakeFiles/plibsys.dir/pcryptohash-gost3411.o
[  7%] Building C object CMakeFiles/plibsys.dir/pcryptohash-md5.o
[ 10%] Building C object CMakeFiles/plibsys.dir/pcryptohash-sha1.o
[ 12%] Building C object CMakeFiles/plibsys.dir/pcryptohash-sha2-256.o
[ 15%] Building C object CMakeFiles/plibsys.dir/pcryptohash-sha2-512.o
[ 17%] Building C object CMakeFiles/plibsys.dir/pcryptohash-sha3.o
[ 20%] Building C object CMakeFiles/plibsys.dir/pdir.o
[ 23%] Building C object CMakeFiles/plibsys.dir/perror.o
[ 25%] Building C object CMakeFiles/plibsys.dir/pfile.o
[ 28%] Building C object CMakeFiles/plibsys.dir/phashtable.o
[ 30%] Building C object CMakeFiles/plibsys.dir/pinifile.o
[ 33%] Building C object CMakeFiles/plibsys.dir/plist.o
[ 35%] Building C object CMakeFiles/plibsys.dir/pmain.o
[ 38%] Building C object CMakeFiles/plibsys.dir/pmem.o
[ 41%] Building C object CMakeFiles/plibsys.dir/pprocess.o
[ 43%] Building C object CMakeFiles/plibsys.dir/pshmbuffer.o
[ 46%] Building C object CMakeFiles/plibsys.dir/psocket.o
[ 48%] Building C object CMakeFiles/plibsys.dir/psocketaddress.o
[ 51%] Building C object CMakeFiles/plibsys.dir/pstring.o
[ 53%] Building C object CMakeFiles/plibsys.dir/ptimeprofiler.o
[ 56%] Building C object CMakeFiles/plibsys.dir/ptree.o
[ 58%] Building C object CMakeFiles/plibsys.dir/ptree-avl.o
[ 61%] Building C object CMakeFiles/plibsys.dir/ptree-bst.o
[ 64%] Building C object CMakeFiles/plibsys.dir/ptree-rb.o
[ 66%] Building C object CMakeFiles/plibsys.dir/puthread.o
[ 69%] Building C object CMakeFiles/plibsys.dir/pipc.o
[ 71%] Building C object CMakeFiles/plibsys.dir/patomic-c11.o
[ 74%] Building C object CMakeFiles/plibsys.dir/pspinlock-c11.o
[ 76%] Building C object CMakeFiles/plibsys.dir/pcondvariable-posix.o
[ 79%] Building C object CMakeFiles/plibsys.dir/pmutex-posix.o
[ 82%] Building C object CMakeFiles/plibsys.dir/psemaphore-posix.o
[ 84%] Building C object CMakeFiles/plibsys.dir/pshm-posix.o
[ 87%] Building C object CMakeFiles/plibsys.dir/psysclose-unix.o
[ 89%] Building C object CMakeFiles/plibsys.dir/puthread-posix.o
[ 92%] Building C object CMakeFiles/plibsys.dir/ptimeprofiler-posix.o
[ 94%] Building C object CMakeFiles/plibsys.dir/pdir-posix.o
[ 97%] Building C object CMakeFiles/plibsys.dir/plibraryloader-posix.o
[100%] Building C object CMakeFiles/plibsys.dir/prwlock-posix.o
Linking C shared library libplibsys.so
[100%] Built target plibsys

CMake Error: The source "/root/plibsys-master/tests/CMakeLists.txt" does not match the source "/root/plibsys-master/src/CMakeLists.txt" used to generate cache.  Re-run cmake with a different source directory.

-- The CXX compiler identification is GNU 4.8.0
-- Check for working CXX compiler: /usr/bin/g++
-- Check for working CXX compiler: /usr/bin/g++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Boost version: 1.59.0
-- Found the following Boost libraries:
--   unit_test_framework
CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:69 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:70 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:71 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:72 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:73 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:74 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:75 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:76 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:77 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:78 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:79 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:80 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:81 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:82 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:83 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:84 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:85 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:86 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:87 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:88 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:89 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:90 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:91 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:92 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:93 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:94 (plibsys_add_test_executable)


CMake Error at CMakeLists.txt:57 (target_compile_definitions):
  target_compile_definitions called with incorrect number of arguments
Call Stack (most recent call first):
  CMakeLists.txt:95 (plibsys_add_test_executable)



        == Tests configuration ==

        Build static tests:
        Boost directory:

CMake Warning (dev) in CMakeLists.txt:
  No cmake_minimum_required command is present.  A line of code such as

    cmake_minimum_required(VERSION 2.8)

  should be added at the top of the file.  The version specified may be lower
  if you wish to support older CMake versions for this project.  For more
  information run "cmake --help-policy CMP0000".
This warning is for project developers.  Use -Wno-dev to suppress it.

-- Configuring incomplete, errors occurred!

cat /etc/mcst_version
2.4-rc4
05.10.2016 14:35: обновление OSLTC: 00D61: 2.0.6: тесты СТОС (OSLTC)

$ ./configure --help