MP710 приложение для Linux
Всем доброго дня. Решил поделиться своими наработками для USB ключа MP710.
Исходный код написан на C, компилировал с использованием библиотеки libusb 1.0 (пример команды для компиляции: ~$ sudo gcc mp710_ON.c -o mp710_ON -lusb-1.0)
Для данного проекта было написано два файла MP710_ON и MP710_OFF. Из названия файлов понятно кто за что отвечает.
Запуск приложений MP710_ON или MP710_OFF должен происходить с указанием номера ключа (1...16) который вы желаете задействовать.
Пример: ~$ sudo ./MP710_ON 1 /* будет активирован первый ключ со значением 128:NC */ ~$ sudo ./MP710_OFF 1 /* будет активирован первый ключ со значением 0:NC */ и так далее....
Исходный код приложения MP710_ON.с:
#define LINUX
#ifdef WINDOWS #include «libusb.h» #endif #ifdef LINUX #include <libusb-1.0/libusb.h> #endif
#include <stdio.h> #include <unistd.h> #include <stdlib.h>
#define DEV_VID 0x16c0 #define DEV_PID 0x05df #define DEV_CONFIG 1 #define DEV_INTF 0 #define EP_IN 0x81 #define EP_OUT 0x01 unsigned char COMMAND_1[8] = {0x63,0x00,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_2[8] = {0x63,0x01,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_3[8] = {0x63,0x02,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_4[8] = {0x63,0x03,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_5[8] = {0x63,0x04,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_6[8] = {0x63,0x05,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_7[8] = {0x63,0x06,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_8[8] = {0x63,0x07,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_9[8] = {0x63,0x08,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_10[8] = {0x63,0x09,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_11[8] = {0x63,0x0a,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_12[8] = {0x63,0x0b,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_13[8] = {0x63,0x0c,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_14[8] = {0x63,0x0d,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_15[8] = {0x63,0x0e,0x80,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_16[8] = {0x63,0x0f,0x80,0x00,0x08,0xff,0x08,0xff}; int main(int argc, char * argv[]) { libusb_device_handle * handle; int ret; int i; char port; unsigned char buf[65]; if (argc != 2) { printf(«Укажите номер порта который вы хотите включить (1...16)\n», argv[0]); return -1; } port = atoi(argv[1]);
libusb_init(NULL); libusb_set_debug(NULL, 3); handle = libusb_open_device_with_vid_pid(NULL, DEV_VID, DEV_PID); if (handle == NULL) { printf(«Не удалось найти устройство\n»); libusb_exit(NULL); return 0; } if (libusb_kernel_driver_active(handle,DEV_INTF)) libusb_detach_kernel_driver(handle, DEV_INTF); if ((ret = libusb_set_configuration(handle, DEV_CONFIG)) < 0) { printf(«Ошибка конфигурации\n»); libusb_close(handle); libusb_exit(NULL); if (ret == LIBUSB_ERROR_BUSY) printf(«B\n»); printf(«ret:%i\n», ret); return 0; } if (libusb_claim_interface(handle, DEV_INTF) < 0) { printf(«Ошибка интерфейса\n»); libusb_close(handle); libusb_exit(NULL); return 0; } if (port == 1){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_1, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 2){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_2, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 3){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_3, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 4){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_4, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 5){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_5, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 6){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_6, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 7){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_7, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 8){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_8, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 9){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_9, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 10){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_10, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 11){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_11, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 12){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_12, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 13){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_13, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 14){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_14, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 15){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_15, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 16){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_16, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } libusb_attach_kernel_driver(handle, DEV_INTF); libusb_close(handle); libusb_exit(NULL); return 0; }
Исходный код приложения MP710_OFF.c:
#define LINUX
#ifdef WINDOWS #include «libusb.h» #endif #ifdef LINUX #include <libusb-1.0/libusb.h> #endif
#include <stdio.h> #include <unistd.h> #include <stdlib.h>
#define DEV_VID 0x16c0 #define DEV_PID 0x05df #define DEV_CONFIG 1 #define DEV_INTF 0 #define EP_IN 0x81 #define EP_OUT 0x01 unsigned char COMMAND_1[8] = {0x63,0x00,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_2[8] = {0x63,0x01,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_3[8] = {0x63,0x02,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_4[8] = {0x63,0x03,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_5[8] = {0x63,0x04,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_6[8] = {0x63,0x05,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_7[8] = {0x63,0x06,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_8[8] = {0x63,0x07,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_9[8] = {0x63,0x08,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_10[8] = {0x63,0x09,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_11[8] = {0x63,0x0a,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_12[8] = {0x63,0x0b,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_13[8] = {0x63,0x0c,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_14[8] = {0x63,0x0d,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_15[8] = {0x63,0x0e,0x00,0x00,0x08,0xff,0x08,0xff}; unsigned char COMMAND_16[8] = {0x63,0x0f,0x00,0x00,0x08,0xff,0x08,0xff}; int main(int argc, char * argv[]) { libusb_device_handle * handle; int ret; int i; char port; unsigned char buf[65]; if (argc != 2) { printf(«Укажите номер порта который вы хотите выключить (1...16)\n», argv[0]); return -1; } port = atoi(argv[1]);
libusb_init(NULL); libusb_set_debug(NULL, 3); handle = libusb_open_device_with_vid_pid(NULL, DEV_VID, DEV_PID); if (handle == NULL) { printf(«Не удалось найти устройство\n»); libusb_exit(NULL); return 0; } if (libusb_kernel_driver_active(handle,DEV_INTF)) libusb_detach_kernel_driver(handle, DEV_INTF); if ((ret = libusb_set_configuration(handle, DEV_CONFIG)) < 0) { printf(«Ошибка конфигурации\n»); libusb_close(handle); libusb_exit(NULL); if (ret == LIBUSB_ERROR_BUSY) printf(«B\n»); printf(«ret:%i\n», ret); return 0; } if (libusb_claim_interface(handle, DEV_INTF) < 0) { printf(«Ошибка интерфейса\n»); libusb_close(handle); libusb_exit(NULL); return 0; } if (port == 1){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_1, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 2){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_2, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 3){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_3, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 4){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_4, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 5){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_5, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 6){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_6, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 7){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_7, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 8){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_8, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 9){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_9, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 10){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_10, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 11){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_11, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 12){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_12, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 13){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_13, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 14){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_14, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 15){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_15, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } else if (port == 16){ ret = libusb_control_transfer(handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x9, 0x300, 0, COMMAND_16, 8, 100); libusb_interrupt_transfer(handle, EP_IN, buf, 8, &ret, 100); } libusb_attach_kernel_driver(handle, DEV_INTF); libusb_close(handle); libusb_exit(NULL); return 0; }